Flow Automation Configuration
Device Tab
Device Type
- SuperFlow (Default)
- SouthWest
- CoastalFlow
Group Address
Default = 0. Device group address.
Unit Address
Default = 1. Device unit address.
Device Max Meter Run
Default = 6. Device max meter run number.
Device Password
Device password for write access.
Device Wakeup
Whether or not the device requires to be wakened before regular communication. The Wakeup feature is used mostly when device is set up for power saving mode.
Device Wakeup Period
Default = 10. The period of time in seconds to allow for the device to respond to a wake up request.
Device Wakeup Time Out
Default = 50. Retry time out on device wake up message.
Device Options
- Retrieve yesterday flow time or energy using history message
- Use Fwv as Fixed Factor in EFM output
- Use Modbus Extended Address
Time Sync Tab
Enable Time Synchronization
Default = Not selected. Select this to configure and allow requests to be made.
Time Synchronization Configuration
Click to select or create The Connection Object assigned to this device. See the Time Synchronization section for more details.
Time Synchronization Interval
Select the desired Time Synchronization Interval relating to the Schedule object assigned on the Connection tab. Time Synchronization checks occur on the frequency of this interval.
Time Synchronization Priority
- Low. Queues up with other Low priority items.
- Medium (Default). Interrupts Low priority items, and queues up with other Medium priority items.
- High. Interrupts Medium and Low priority items, and queues up with other High priority items.
Timezone
Default = UTC-06:00 Central Time (US & Canada).
Archive Collection Tab
Collection Priority
- Low (Default). Queues up with other Low priority items.
- Medium. Interrupts Low priority items, and queues up with other Medium priority items.
- High. Interrupts Medium and Low priority items, and queues up with other High priority items.
Flow Units - Daily Flow Time
- Hours
- Minutes (Default)
- Seconds
Flow Units - Hourly Flow Time
- Hours
- Minutes (Default)
- Seconds
Intervals
Default = Interval 15. Select the desired Interval relating to the Schedule object assigned on the Connection tab. Retrievals occur on the frequency of this interval.
Meter Runs Tab
Meter Runs - Meter
Meter 1-6. Select the meter run to configure.
Meter
Click to select or create the Meter Object assigned to this meter run number. See the Meter section for more details.
Archives
Click to select or create an Archive Limits. See the Archive Limits section for more details.
For assistance, please submit a ticket via our Support Portal, email autosol.support@autosoln.com or call 281.286.6017 to speak to a support team member.