Flow Automation OPC Items
Standard Items
Protocol Items
The Flow Automation protocol implementation supports the following item names for use by client applications
Note
Each item name can be followed by the <Primary> or <Secondary> specification. When one of these is included in the item name, the data will be retrieved using the primary or secondary connection (as specified) instead of the current connection.
Each item can have "/n" appended. n indicates the run number. It is set to be 1 as default.
Item | Access | Data Type | Description |
---|---|---|---|
ACTION | R/W | UI1 | PID Action |
AI_Value | R/W | R4 | Analog Input Current Value |
Air | R/W | R4 | AIR |
AnalogOutput | R/W | R4 | Physical Analog Output |
AO_DO_CTL | R/W | UI1 | PID AO or DO control |
AO_POINT_NUMBER | R/W | UI1 | PID Control Output Point |
AO_Value | R/W | R4 | Analog Output Current Value |
Argon | R/W | R4 | ARGON |
AtmoPress | R/W | R4 | Atmospheric Pressure |
BatteryVoltage | R/W | R4 | Battery Voltage |
BatteryVoltageCF | R/W | R4 | Battery Voltage Coastal Flow |
Beta | R/W | R4 | Beta |
BTUContent | R/W | R4 | BTU Content |
CalcMethod | R/W | UI1 | Calculation Method |
CDayEnergyTotal | R/W | R4 | Current Day Energy Total |
CDayFlowTotal | R/W | R4 | Current Day Flow Total |
CFO_BETA | R/W | R4 | Coastal Flow Orifice BETA |
CFO_CDAYENERGYTOTAL | R/W | R4 | Coastal Flow Orifice Current Day Energy Total |
CFO_CDAYFLOWTOTAL | R/W | R4 | Coastal Flow Orifice Current Day Flow Total |
CFO_DiffPress | R/W | R4 | Coastal Flow Orifice Differential Pressure |
CFO_FC | R/W | R4 | Coastal Flow Orifice Fc |
CFO_FG | R/W | R4 | Coastal Flow Orifice Fg |
CFO_FN | R/W | R4 | Coastal Flow Orifice Fn |
CFO_FPB | R/W | R4 | Coastal Flow Orifice Fpb |
CFO_FPV | R/W | R4 | Coastal Flow Orifice Fpv |
CFO_FSL | R/W | R4 | Coastal Flow Orifice Fsl |
CFO_FTB | R/W | R4 | Coastal Flow Orifice Ftb |
CFO_FTF | R/W | R4 | Coastal Flow Orifice Ftf |
CFO_IDAILYRATE | R/W | R4 | Coastal Flow Orifice Instant Daily Rat |
CFO_IFLOWRATE | R/W | R4 | Coastal Flow Orifice Instant Flow Rate |
CFO_RED | R/W | R4 | Coastal Flow Orifice Red |
CFO_SPRESS | R/W | R4 | Coastal Flow Orifice Static Pressure |
CFO_SREXTENSION | R/W | R4 | Coastal Flow Orifice Static Root Extension |
CFO_TACCUFLOW | R/W | R4 | Coastal Flow Orifice Total Accumulated Flow |
CFO_TEMP | R/W | R4 | Coastal Flow Orifice Temperature |
CFO_UNCORRTOTAL | R/W | R4 | Coastal Flow Orifice Uncorrected Total |
CFO_Y1 | R/W | R4 | Coastal Flow Orifice Y1 |
CFO_YESTOTAL | R/W | R4 | Coastal Flow Orifice Yesterday Total |
CFO_ZB | R/W | R4 | Coastal Flow Orifice Zb |
CFO_ZF | R/W | R4 | Coastal Flow Orifice Zf |
CFO_ZS | R/W | R4 | Coastal Flow Orifice Zs |
CFT_ACCUFLOWRATE | R/W | R4 | Coastal Flow Turbine Accumulated Flow Rate |
CFT_ACUTALDELTAVOL | R/W | R4 | Coastal Flow Turbine Accumulated Delta Volume |
CFT_CDAYENERGYTOTAL | R/W | R4 | Coastal Flow Turbine Current Day Energy Total |
CFT_CDAYFLOWTOTAL | R/W | R4 | Coastal Flow Turbine Current Day Flow Total |
CFT_COUNTBUFFER1-12 | R/W | R4 | Coastal Flow Turbine Count Buffer 1-12 |
CFT_COUNTBUFFERINDEX | R/W | R4 | Coastal Flow Turbine Count Buffer Index |
CFT_FPB | R/W | R4 | Coastal Flow Turbine Fpb |
CFT_FPV | R/W | R4 | Coastal Flow Turbine Fpv |
CFT_FTB | R/W | R4 | Coastal Flow Turbine Ftb |
CFT_IDAILYRATE | R/W | R4 | Coastal Flow Turbine Instant Daily Rate |
CFT_IFLOWRATE | R/W | R4 | Coastal Flow Turbine Instant Flow Rate |
CFT_MAINDELTACOUNT | R/W | UI2 | Coastal Flow Turbine Main Delta Count |
CFT_METERDEVIATION | R/W | R4 | Coastal Flow Turbine Meter Deviation |
CFT_NOFLOWSTATUS | R/W | UI1 | Coastal Flow Turbine No Flow Status |
CFT_NOFLOWTIMER | R/W | UI2 | Coastal Flow Turbine No Flow Timer |
CFT_SENSEDELTACOUNT | R/W | UI2 | Coastal Flow Turbine Sense Delta Count |
CFT_SPRESS | R/W | R4 | Coastal Flow Turbine Static Pressure |
CFT_STDDELTAVOL | R/W | R4 | Coastal Flow Turbine Standard Delta Volume |
CFT_TACCUFLOW | R/W | R4 | Coastal Flow Turbine Total Accumulated Flow |
CFT_TEMP | R/W | R4 | Coastal Flow Turbine Temperature |
CFT_UNCORRTOTAL | R/W | R4 | Coastal Flow Turbine Uncorrected Total |
CFT_YESTOTAL | R/W | R4 | Coastal Flow Turbine Yesterday Total |
CFT_ZB | R/W | R4 | Coastal Flow Turbine Zb |
CFT_ZF | R/W | R4 | Coastal Flow Turbine Zf |
CFT_ZS | R/W | R4 | Coastal Flow Turbine Zs |
CO | R/W | R4 | CO |
ContractHour | R/W | UI1 | Contract Hour |
ContractHourCF | R/W | UI1 | Coastal Flow Contract Hour |
CurrentDay | R/W | Current Day | |
CurrentHour | R/W | Current Hour | |
CurrentMinute | R/W | Current Minute | |
CurrentMonth | R/W | Current Month | |
CurrentSecond | R/W | Current Second | |
CurrentYear | R/W | Current Year | |
Cycletime | R/W | UI1 | Cycle Time |
CycletimeCF | R/W | Cycle Time Coastal Flow | |
DelADeviation | R/W | R4 | Delta A Deviation (Only for Meter Type Rockwell Auto-Adjust Turbine) |
DeltaAlarmLimit | R/W | R4 | Delta A Alarm Limit |
DERIVATIVE | R/W | R4 | PID Derivative |
DeviceConfig | R/W | BOOL | Autosol Internal Flag for Request Device Config |
DI_Value | R/W | UI1 | Digital Input Current State |
DiffPress | R/W | R4 | Differential Pressure |
DiscreteOutputOff | R/W | R4 | Physical Discrete Output Off |
DiscreteOutputOn | R/W | R4 | Physical Discrete Output On |
DO_Value | R/W | UI1 | Digital Output Current State |
DPCutOffDelay | R/W | R4 | DP Cutoff Delay |
DPSwitchLevel | R/W | R4 | DP Switching Level |
EndRamMemAddr | R/W | UI4 | End of RAM Memory Address |
EoverD | R/W | R4 | E Over D |
ERROR_DEADBAND | R/W | R4 | PID Error Dead Band |
ESD_ENABLE | R/W | UI1 | Emergency Shut Down Enable |
ESD_FUNCTIONNAME | R/W | String | Emergency Shut Down Function Name |
ESD_OUTPUTPOINTNUMBER | R/W | UI1 | Emergency Shut Down Output Point Number |
ESD_PULSEDURATION | R/W | R4 | Emergency Shut Down Pulse Duration |
ESD_SHUTINTIMER | R/W | R4 | Emergency Shut Down Shut In Timer |
ESD_TRIP | R/W | UI1 | Emergency Shut Down Trip |
Ethane | R/W | R4 | Ethane |
ExpanFactorY | R/W | R4 | Expansion Factor Y |
Factor1 | R/W | R4 | Fwv Factor |
Factor10 | R/W | R4 | Extended Static Flow Factor #10 |
Factor11 | R/W | R4 | Extended Static Flow Factor #11 |
Factor12 | R/W | R4 | Extended Static Flow Factor #12 |
Factor13 | R/W | R4 | Extended Static Flow Factor #13 |
Factor14 | R/W | R4 | Extended Static Flow Factor #14 |
Factor15 | R/W | R4 | Extended Static Flow Factor #15 |
Factor16 | R/W | R4 | Extended Static Flow Factor #16 |
Factor2 | R/W | R4 | Water Content |
Factor3 | R/W | R4 | Well Stream |
Factor4 | R/W | R4 | Extended Static Flow Factor #4 |
Factor5 | R/W | R4 | Extended Static Flow Factor #5 |
Factor6 | R/W | R4 | Extended Static Flow Factor #6 |
Factor7 | R/W | R4 | Extended Static Flow Factor #7 |
Factor8 | R/W | R4 | Extended Static Flow Factor #8 |
Factor9 | R/W | R4 | Extended Static Flow Factor #9 |
FAIL_MODE | R/W | UI1 | PID Fail Mode |
Fb | R/W | R4 | Fb |
Fg | R/W | R4 | Fg |
FlowFactorStatus | R/W | UI2 | Flow Factor Status |
FlowPrssFactor | R/W | R4 | Flowing Pressure Factor (Only for Meter Type Turbine or Positive Displacement) |
FlowTempFactor | R/W | R4 | Flowing Temperature Factor (Only for Meter Type Turbine or Positive Displacement) |
FlowTimeEnable | R/W | UI1 | Flow time enable |
Fpb | R/W | R4 | Fpb |
Fr | R/W | R4 | Fr |
Ftf | R/W | R4 | Ftf |
FUNCTION_NAME | R/W | String | Emergency Shut Down Function Name |
FunctionCodeCF | R/W | UI1 | Coastal Flow Function Code |
GAIN | R/W | R4 | Proportional Term |
GQMethod | R/W | UI1 | GQ Archive Method |
H2 | R/W | R4 | H2 |
H2O | R/W | R4 | H2O |
H2S | R/W | R4 | H2S |
HCSpanCorFactor | R/W | R4 | High Cell Span Correction Factor |
Helium | R/W | R4 | HELIUM |
HIGH_LOW_SEL | R/W | UI1 | PID High Low Select |
HighFlowAlarm | R/W | R4 | High flow alarm |
HostBaudIndex | R/W | UI1 | Host Baud Index |
HostPass | R/W | BSTR | Host Password |
IButane | R/W | R4 | IBUTANE |
IFlowrate | R/W | R4 | Instantaneous Flow Rate |
InstUncofFlowRate | R/W | R4 | Instantaneous Uncorrected Flow Rate (Only for Meter Type Turbine or Positive Displacement) |
INTEGRAL | R/W | R4 | PID Integral |
IPentane | R/W | R4 | IPENTANE |
K | R/W | R4 | K |
KFactor | R/W | R4 | Meter K Factor |
Km | R/W | R4 | Main Rotor Factor |
Ks | R/W | R4 | Sensor Rotor Factor |
LastUseMemAddr | R/W | UI4 | Last Used RAM Memory Address |
LCSpanCorFactor | R/W | R4 | Low Cell Span Correction Factor |
LocalLogInterval | R/W | R4 | Coastal Flow Low Battery Alarm Limit |
LocalUnitComAddress | R/W | UI1 | Local Log Interval |
LowBattAlarm | R/W | UI1 | Local Unit Communication Address |
LowCutOff | R/W | R4 | Low Battery Alarm |
LowFlowAlarm | R/W | R4 | Low flow alarm |
MAX_OUTPUT_CHANGE | R/W | R4 | PID Max Output Change |
MAX_SCALE | R/W | R4 | PID Max Scale |
MaxNumMeterRun | R/W | UI1 | Max. Number of Meters Run |
MeterNumber | R/W | String | Meter Number |
Methane | R/W | R4 | Methane |
MFactor | R/W | R4 | Meter M Factor |
MIN_SCALE | R/W | R4 | PID Min Scale |
ModbusRegister | R/W | R4, String | 4001/A is for Modbus ASCII 4001/R is for Modbus RTU 4001M/A is for String 4001M/R is for String |
MoleCO2 | R/W | R4 | Mole percent of CO2 |
MoleN2 | R/W | R4 | Mole percent of N2 |
MsgLengthCF | R/W | UI1 | Coastal Flow Message Length |
NButane | R/W | R4 | NBUTANE |
NDecane | R/W | R4 | NDECANE |
NHeptane | R/W | R4 | NHEPTANE |
NHexane | R/W | R4 | NHEXANE |
NNoname | R/W | R4 | NNONANE |
NOctane | R/W | R4 | NOCTANE |
NPentane | R/W | R4 | NPENTANE |
NumAnalogIn | R/W | UI1 | Num Analog Input |
NumAnalogOut | R/W | UI1 | Number of Analog output |
NUMBER_SMOOTHING | R/W | UI1 | PID Number Smoothing |
NumDayRec | R/W | UI2 | Number of Day Records |
NumDiscreteIn | R/W | UI1 | Number of Discrete Input |
NumMeterRun | R/W | UI1 | Number of Meters run |
NumPeriodicRec | R/W | UI2 | Number of Meter periodic records |
NumPulseIn | R/W | UI1 | Number of Pulse input |
O2 | R/W | R4 | O2 |
OrificeDiameter | R/W | R4 | Orifice Diameter |
OVRD_ACTION | R/W | UI1 | PID Override Action |
OVRD_DERIVATIVE | R/W | R4 | PID Override Derivative |
OVRD_ERROR_DEADBAND | R/W | R4 | PID Override Error Dead Band |
OVRD_GAIN | R/W | R4 | PID Override Gain |
OVRD_INTEGRAL | R/W | R4 | PID Override Integral |
OVRD_MAX_SCALE | R/W | R4 | PID Override Max Scale |
OVRD_PROCESS_INDEX | R/W | UI1 | PID Override Process Index |
OVRD_PROCESS_VARIABLE | R/W | R4 | PID Override Process Variable |
OVRD_RAMP_RATE | R/W | R4 | PID Override Ramp Rate |
OVRD_SETPOINT | R/W | R4 | PID Override Set Point |
OVRD_SP_RAMP_ENABLE | R/W | UI1 | PID Override Set Point Ramp Enable |
PID_MANUAL | R/W | UI1 | PID Manual |
PID_OUTPUT | R/W | R4 | PID Controller Output |
PID_PROPORTION | R/W | UI1 | PID or Proportional |
PipeDiameter | R/W | R4 | Pipe Diameter |
PressBase | R/W | R4 | Pressure Base |
PrimeFactor | R/W | R4 | Prime Factor |
PROCESS_INDEX | R/W | UI1 | PID Process Index |
PROCESS_VARIABLE | R/W | R4 | PID Process Variable |
Propane | R/W | R4 | Propane |
PULSE_VALUE | R/W | UI2 | Pulse Input Current Value |
RadioKeyDelay | R/W | R4 | Radio key delay |
RadioKeyDlyCF | R/W | R4 | Coastal Flow Radio Key Delay |
RAMP_RATE | R/W | R4 | PID Ramp Rate |
Run1MeterType | R/W | UI1 | Run 1 Meter Type |
Run2MeterType | R/W | UI1 | Run 2 Meter Type |
Run3MeterType | R/W | UI1 | Run 3 Meter Type |
RunName | R/W | String | Name of the Run |
RunNumber | R/W | String | Run Number |
ScompressFactor | R/W | R4 | Super compressibility Factor |
SETPOINT | R/W | R4 | PID Set Point |
SETPOINT_RAMP_ENABLE | R/W | UI1 | PID Set Point Ramp Enable |
SharedPrss | R/W | UI1 | Shared Pressure |
SharedTemp | R/W | UI1 | Shared Temperature |
SoftID | R/W | String | Software ID |
SpanCorFactor | R/W | R4 | Span correction Factor |
SpcGravity | R/W | R4 | Specific Gravity |
SpcHeat | R/W | R4 | Specific Heat |
SPress | R/W | R4 | Static Pressure |
SRExtension | R/W | R4 | Square Root Extension |
StationNameCF | R/W | String | Coastal Flow Station Name |
SuperFloAddressCF | R/W | UI1 | Coastal Flow Super Flow Address |
SyncByteCF | R/W | UI1 | Coastal Flow SYNC byte |
TAccuFlow | R/W | R4 | Total Accumulated flow |
Temp | R/W | R4 | Temperature |
TempBase | R/W | R4 | Temperature Base |
TL_CommunicationStatus | R/W | UI1 | Tank Level Communication Status |
TL_CurrentDay | R/W | UI1 | Tank Level Current Day |
TL_CurrentHighDIStatus | R/W | UI1 | Tank Level High Digital Input |
TL_CurrentHiLevelLimitStatus | R/W | UI1 | Tank Level High Limit Status |
TL_CurrentHour | R/W | UI1 | Tank Level Current Hour |
TL_CurrentLevel | R/W | R4 | Tank Level Current Level |
TL_CurrentLowDIStatus | R/W | UI1 | Tank Level Low Digital Input |
TL_CurrentLowLevelLimitStatus | R/W | UI1 | Tank Level Low Limit Status |
TL_CurrentMinute | R/W | UI1 | Tank Level Current Minute |
TL_CurrentMonth | R/W | UI1 | Tank Level Current Month |
TL_CurrentSecond | R/W | UI1 | Tank Level Current Second |
TL_CurrentShutInDOStatus | R/W | UI1 | Tank Level Shut In State |
TL_CurrentYear | R/W | UI1 | Tank Level Current Year |
TL_HighLevelToday | R/W | R4 | Tank Level High Level Today |
TL_HighLevelYesterday | R/W | R4 | Tank Level High Level Yesterday |
TL_LowLevelToday | R/W | R4 | Tank Level Low Level Today |
TL_LowLevelYesterday | R/W | R4 | Tank Level Low Level Yesterday |
UncorTotal | R/W | R4 | Uncorrected Total (Only for Meter Type Turbine or Positive Displacement) |
UnitComAddr | R/W | UI1 | Unit Communication Address |
UnitType | R/W | UI1 | Unit Type |
YesterdayEnergy/A | R/W | R4 | Yesterday Energy Requested by using Modbus item 9103 for run 1; 9115 for run 2; 9127 for run 3; 9139 for run 4. “/A” indicates Modbus ASCII register format and “/R” indicates Modbus RTU register format. |
YesterdayFlowTime/A | R/W | R4 | Yesterday Flow Time Requested by using Modbus item 9108 for run 1; 9120 for run 2; 9132 for run 3; 9144 for run 4. “/A” indicates Modbus ASCII register format and “/R” indicates Modbus RTU register format. |
YesTotal | R/W | R4 | Yesterday total |
YSubFactor | R/W | R4 | Y Subfactor |
Extended Items
Item | Data Type | Description |
---|---|---|
LastAlarmRecord/1 | Date | Timestamp of the last Alarm Record. |
LastDailyRecord/1 | Date | Timestamp of the last Daily Record. |
LastEventRecord/1 | Date | Timestamp of the last Event record. |
LastHourlyRecord/1 | Date | Timestamp of the last Hourly record. |
LastTimeSync | Date | Timestamp of the last time synchronization attempt. |
LastTimeSyncResult | I4 | Result code for the last time synch: 0 for no error or alarm. Error and alarm result code values are set in the TimeSync object. |
MoveAlarm/1 | I2 | Move Alarm1 Upload position pointer: positive value moves backward, negative forward. |
MoveDaily/1 | I2 | Move Daily1 Upload position pointer: positive value moves backward, negative forward. |
MoveEvent/1 | I2 | Move Event1 Upload position pointer: positive value moves backward, negative forward. |
MoveHourly/1 | I2 | Move Hourly1 Upload position pointer: positive value moves backward, negative forward. |
ResetAlarm/1 | BOOL | Reset Alarm1 Upload position pointer. |
ResetDaily/1 | BOOL | Reset Daily1 Upload position pointer. |
ResetEvent/1 | BOOL | Reset Event1 Upload position pointer. |
ResetHourly/1 | BOOL | Reset Hourly1 Upload position pointer. |
RetrieveHistory | BOOL | Retrieve History. |
TimeSync | I2 | Triggers a Time Sync to occur. |
For assistance, please submit a ticket via our Support Portal, email autosol.support@autosoln.com or call 281.286.6017 to speak to a support team member.