DNP3 FBx

Owned by Michael Standal
Last updated: Feb 14, 2024 by Emma Fullilove (Deactivated)
1 min read

Supported Devices

The DNP3 FBx protocol module can communicate with devices and emulators that are compliant with the DNP3 protocol specification. It also supports extended features for the following Emerson devices:

  • FB1000 Series Flow Computer
  • FB2000 Series Flow Computer
  • FB3000 RTU

Supported Features

In addition to the DNP3 Supported Features, the DNP3 FBx extension:

  • Reads and writes FBx object parameters using tunnel commands.
  • Retrieves history, event, and alarm uploads using DNP3 file objects.
  • Retrieves meter configurations using DNP3 objects and FBx object parameters.

Further Information

For further information regarding the Emerson FBx device, please refer to the vendor documents.

Device Tab

See the DNP3 Configuration for information regarding common configuration items for the DNP3 device family.

See the DNP3 FBx Device Tab for information pertaining only to DNP3 FBx devices.

Time Sync Tab

See the DNP3 Configuration for information regarding Time Sync confirmation for the DNP3 device family.

Archive Collection Tab

See the DNP3 FBx Archive Collection Tab for information regarding the collection intervals and EFM options for the DNP3 FBx extension.

Archive Settings Tab

See the DNP3 FBx Archive Settings Tab for information regarding the event, alarm, and user periodic upload configurations for the DNP3 FBx extension.

Meter Runs Tab

See the DNP3 FBx Meter Runs Tab for information regarding the upload configuration for each meter run of the DNP3 FBx extension.

Transactional Logs Tab

See the DNP3 FBx Transactional Log Tab for information regarding the upload configuration for each transactional log of the DNP3 FBx extension.


For assistance, please submit a ticket via our Support Portal, email autosol.support@autosoln.com or call 281.286.6017 to speak to a support team member.