DNP3 FBx Device Tab

Owned by Michael Standal
Last updated: Jul 31, 2023 by Emma Fullilove (Deactivated)
1 min read
See DNP3 Configuration for information regarding common configuration items for the DNP3 device family.   This page only documents items that are exclusive to DNP3 FBx devices.


Because Emerson FBx devices don't support direct operate control writes, the Use select-operate for control writes option must be checked in order to perform control writes on an Emerson FBx device.  See DNP3 Configuration for more information.

Device Type

DNP3 FBx device type:

  • FB 1000 (Default)

  • FB 2000

  • FB 3000

Security

DNP3 FBx secure login is not yet supported. To read and write protected data, use Emerson's Field Tools program to disable the "Require Login" option for the port of the device that ACM is connecting to.

How to Disable Secure Login Using Emerson Field Tools (Version 3.0.0.465)

Start Field Tools and connect to the device.

Go to the Configure tab and select Communications.

Select the port that ACM will be connected to from the dropdown list on the upper left.

Go to the DNP3 tab.

Uncheck the Require Login option.

Class Uploads

Information about the Class Uploads section of the Device Tab is located under "Class Uploads" on the DNP3 Configuration page.


For assistance, please submit a ticket via our Support Portal, email autosol.support@autosoln.com or call 281.286.6017 to speak to a support team member.