Modbus Lufkin SAM Configuration

See the Common Device Configuration guide for assistance configuring the General, Options, Details, and Logging tabs. See the Connection/Schedule page for assistance with the Connection tab.

Device Tab

See the Common Modbus Device Tab page.

Time Sync Tab

See the Common Modbus Time Sync page.

Card Collection Tab

Collection Priority

Low (Default).Queues up with other Low priority items.
Medium. Interrupts Low priority items, and queues up with other Medium priority items.
High. Interrupts Medium and Low priority items, and queues up with other High priority items.

Card Collection Interval

Select the desired Interval relating to the Schedule object assigned on the Connection tab. Record collection will occur at a frequency based on the configuration of this interval.

Card Collection

Default = Not selected. Select the appropriate Cards to be collected for Card Collection.

Card Meter

Click to select or create the Meter Object assigned for the CycleLog. See the Meter section for more details.

Get Card Time

Default = 30. User defined time difference between surface card and pump card in the same card index. If time difference is less than defined, the pump card will use surface card time stamp. This field is in seconds.

Get Single Shutdown Card

Default = Selected. If selected, the system will retrieve only the most recent shutdown card in the stack.