Modbus BP WellControl Commands
Common Commands
See Device Object Common Commands for commands that are common to all device types.
Commands
Command | Description | Parameters |
|---|---|---|
Test Communication | When executed, ACM will poll a known OPC item from the device and wait for the response to see if the communication is good. | None |
Retrieve CycleLog | Requests the retrieval of all new cycle log records. | None |
Reset CycleLog Pointer | Clears the cycle log retrieval position so retrieval starts at the oldest record. | None |
Move CycleLog Pointer Back | Moves the saved cycle log retrieval position to an older record. Enter the number of records to move back. Maximum value is 29. | Record Count |
Time Sync | Causes a comparison of the date and time in the device to the host date and time. Once compared, the configured rules of the selected time sync object will be applied - including time zone and daylight saving options. | None |
Read RTU Configuration | Reads the RTU configuration data from the RTU as defined in the LastRead file and tables. | None |
Write Last Read RTU Configuration | Writes the RTU configuration data as defined in the selected Last Read tables. | None |
Write Development RTU Configuration | Writes the RTU configuration data as defined in the selected Development tables | None |
Write Production RTU Configuration | Writes the RTU configuration data as defined in the selected Production tables. | None |