Dresser MC3 Commands
- Emma Fullilove (Deactivated)
- ken Halprin
- Adam Haselden
Common Commands
See Device Object Common Commands for commands that are common to all device types.
Commands
Command | Description | Parameters |
|---|---|---|
Test Communication | When executed, ACM will poll a known OPC item from the device and wait for the response to see if the communication is good. | None |
Retrieve History | Requests the retrieval of all enabled archive record types. | None |
Retrieve Meter Config during next history poll | Retrieves meter configuration data for all meters during the next history retrieval. This command should be issued if EFM configuration changes have been made on the RTU. | None |
Reset Audit Pointer | Clears the audit retrieval position so retrieval starts at the oldest record. | Audit Number |
Reset Fault Pointer | Clears the fault retrieval position so retrieval starts at the oldest record. | None |
Reset Alarm Pointer | Clears the alarm retrieval position so retrieval starts at the oldest record. | None |
Time Sync | Causes a comparison of the date and time in the device to the host date and time. Once compared, the configured rules of the selected time sync object will be applied - including time zone and daylight saving options. | None |
Related content
For assistance, please submit a ticket via our Support Portal, email autosol.support@autosoln.com or call 281.286.6017 to speak to a support team member.