Dresser MC3 Configuration

See the Common Device Configuration guide for assistance configuring the General, Options, Details, and Logging tabs. See the Connection/Schedule page for assistance with the Connection tab.

Device Tab

Site ID

Site ID that is required to match the device's Site ID in order to communicate and retrieve history.

Serial Number

Serial Number that is required to match the device's Serial Number in order to communicate and retrieve history.

Enable Enhanced Logging Mode

Default = Not selected. This prints very verbose messages in the ACM log about the current state of the protocol engine and/or EFM retrieval.

Time Sync Tab

See the Common Time Sync Tab page.

Archive Collection Tab

Archives

Click 

 to select or create an Archive Limits object. See the Archive Limits section for more details.

Meter

Click

to select a Meter object. See the Meter section for more details.