Modbus Scanner 1150 Commands
Common Commands
See Device Object Common Commands for commands that are common to all device types.
Commands
Command | Description | Parameters |
|---|---|---|
Test Communication | When executed, ACM will poll a known OPC item from the device and wait for the response to see if the communication is good. | None |
Retrieve History | Requests the retrieval of history records (for all enabled meters). | None |
Retrieve meter config during next history poll | Retrieves meter configuration data during the next history retrieval. | None |
Reset Periodic Pointer | Clears the periodic retrieval position so retrieval starts at the oldest record. | None |
Reset Daily Pointer | Clears the daily retrieval position so retrieval starts at the oldest record. | None |
Reset Alarm Pointer | Clears the alarm retrieval position so retrieval starts at the oldest record. | None |
Reset Event Pointer | Clears the event retrieval position so retrieval starts at the oldest record. | None |
Move Periodic Pointer | Moves the saved hourly retrieval position to an older record. Enter the specified date/time. | Position Date/Time |
Move Daily Pointer Back | Moves the saved daily retrieval position to an older record. Enter the specified date/time. | Position Date/Time |
Time Sync | Causes a comparison of the date and time in the device to the host date and time. Once compared, the configured rules of the selected time sync object will be applied - including time zone and daylight saving options. | None |