Connection Settings
- Edgar Cantu
- Emma Fullilove (Deactivated)
- Austin Hager
Connection settings are used by the protocol device object. These settings define the connection that Edge ACM will use to connect to the RTU or PLC. Every protocol device requires a Connection Settings object, so it is suggested you create this before creating the protocol device object.
Configuration
Property | Description |
|---|---|
Name | The name of this item |
Host IP | The IP address of the End Device you will connect to |
Host Port | The port of the End Device you will connect to |
Connection Timeout (ms) | The time, in milliseconds, Edge ACM will wait for a response from the End Device after trying to connect |
Connection Interval (ms) | The time, in milliseconds, Edge ACM will wait before attempting to reconnect to the end device after a disconnect |
Response Timeout (ms) | The time, in milliseconds, Edge ACM will wait for a response from the End Device before retrying the message |
Timer Tick (ms) | The interval, in milliseconds, Edge ACM uses to check the above timeouts |
Poll retries | The number of times a poll message will be tried before a reconnect is attempted |
Folder | The parent folder for this item |
Â
For assistance, please submit a ticket via our Support Portal, email autosol.support@autosoln.com or call 281.286.6017 to speak to a support team member.