Table of Contents | ||||||||
---|---|---|---|---|---|---|---|---|
|
Info |
---|
See the the Common Device Configuration guide for assistance configuring the General, Options, Details, and Logging tabs. See the Connection/Schedule page for assistance with the Connection tab. |
Device Tab
Device Type
- SuperFlow (Default)
- SouthWest
- CoastalFlow
...
Device Wakeup Period
Default = 10. The period of time in seconds to allow for the device to respond to a wake up request.
Device Wakeup Time Out
Default = 50. Retry time out on device wake up message.
...
Time Synchronization Configuration
Click to select or create The Connection Object assigned to this device. See the Time Synchronization section for more details.
Time Synchronization Interval
Select the desired Time Synchronization Interval relating to the Schedule object assigned on the Connection tab. Time Synchronization checks occur on the frequency of this interval.
Time Synchronization Priority
- Low. Queues up with other Low priority items.
- Medium (Default). Interrupts Low priority items, and queues up with other Medium priority items.
- High. Interrupts Medium and Low priority items, and queues up with other High priority items.
Timezone
Default = UTC-06:00 Central Time (US & Canada).
Archive Collection Tab
Collection Priority
- Low (Default). Queues up with other Low priority items.
- Medium. Interrupts Low priority items, and queues up with other Medium priority items.
- High. Interrupts Medium and Low priority items, and queues up with other High priority items.
Flow Units - Daily Flow Time
...
- Hours
- Minutes (Default)
- Seconds
Intervals
Default = Interval 15. Select the desired Interval relating to the Schedule object assigned on the Connection tab. Retrievals occur on the frequency of this interval.
Meter Runs Tab
Meter Runs - Meter
Meter 1-6. Select the meter run to configure.
...
Click to select or create the Meter Object assigned to this meter run number. See the Meter section for more details.
Archives
Click to select or create an Archive Limits. See the Archive Limits section for more details.