See the Common Device Configuration guide for assistance configuring the General, Options, Details, and Logging tabs. See the Connection/Schedule page for assistance with the Connection tab. |
Default = 0. Device group address.
Default = 1. Device unit address.
Default = 6. Device max meter run number.
Device password for write access.
Whether or not the device requires to be wakened before regular communication. The Wakeup feature is used mostly when device is set up for power saving mode.
Default = 10. The period of time in seconds to allow for the device to respond to a wake up request.
Default = 50. Retry time out on device wake up message.
Default = Not selected. Select this to configure and allow requests to be made.
Click to select or create The Connection Object assigned to this device. See the Time Synchronization section for more details.
Select the desired Time Synchronization Interval relating to the Schedule object assigned on the Connection tab. Time Synchronization checks occur on the frequency of this interval.
Default = UTC-06:00 Central Time (US & Canada).
Default = Interval 15. Select the desired Interval relating to the Schedule object assigned on the Connection tab. Retrievals occur on the frequency of this interval.
Meter 1-6. Select the meter run to configure.
Click to select or create the Meter Object assigned to this meter run number. See the Meter section for more details.
Click to select or create an Archive Limits. See the Archive Limits section for more details.