| Table of Contents | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
See the Common Modbus Device Tab page.
Time Sync Tab
Enable Time Synchronization
Default = Not selected. Select this to configure and allow time syncs to be performed, either on a scheduled interval or using the "Time Sync" command.
Time Synchronization Configuration
Time Sync Object assigned to this device. Click 
to select or create one. See the Time Synchronization section for more details.
Time Synchronization Interval
Select the desired Time Synchronization Interval relating to the Schedule object assigned on the Connection tab. Time Synchronization checks occur on the frequency of this interval.
Time Synchronization Priority
- Low. Queues up with other Low priority items.
- Medium (Default). Interrupts Low priority items, and queues up with other Medium priority items.
- High. Interrupts Medium and Low priority items, and queues up with other High priority items.
Timezone
Specifies the time zone the device's clock uses. Default = UTC-06:00 Central Time (US & Canada)See the Common Modbus Time Sync page.
Archive Collection Tab
Collection Priority
- Low (Default).Queues up with other Low priority items.
- Medium. Interrupts Low priority items, and queues up with other Medium priority items.
- High. Interrupts Medium and Low priority items, and queues up with other High priority items.
Daily/Plunger Cycle Log/Device Sample Log 1/Device Sample Log2 Collection Intervals
Select the desired Interval relating to the Schedule object assigned on the Connection tab for each archive collection type.
Meter Runs Tab
Meter
Click to select or create the Meter Object assigned. See the Meter section for more details.
Archives
Click to select or create an Archive Limits for each archive collection type. See the Archive Limits section for more details.
Collect Archives
Default = Not selected. Select each archive collection type for collection.