Modbus MicroMP3 Configuration

Owned by Dennis Waehner
Last updated: Jun 12, 2024 by Emma Fullilove (Deactivated)
2 min read

See the  Common Device Configuration guide for assistance configuring the General, Options, Details, and Logging tabs.  See the Connection/Schedule page for assistance with the Connection tab.

Device Tab

See the Common Modbus Device Tab page.

Time Sync Tab

See the Common Modbus Time Sync page.

Archive Collection Tab

NOTE: Different archive types may or may not be available depending on the configuration of the RTU through RTU vendor software.

  • If the Device is in Truck Mode Alarms, Events, Hourly, Daily, and Batch archives are available.
  • If the Device is NOT in Truck Mode Alarms, Events, Hourly, Daily, Batch and Monthly archives are available.

Collection Priority

  • Low (Default).Queues up with other Low priority items.
  • Medium. Interrupts Low priority items, and queues up with other Medium priority items.
  • High. Interrupts Medium and Low priority items, and queues up with other High priority items.

Archives

Default = None selected. Select the checkbox next to the type of archive needed (Alarm, Event, etc.) and also select an Interval relating to the Schedule object assigned on the Connection tab. Record collection will occur at a frequency based on the configuration of this interval.

Archive Limits

Click  to select or create an Archive Limits for each archive type. See the Archive Limits section for more details.

Meters Tab

NOTE: Different meters may or may apply depending on the configuration of the RTU through RTU vendor software.

  • If the Device is in Truck Mode two meters (only Meter 1 and Meter 2) are used and they represent Customer A and Customer B.
  • If the Device is NOT in Truck Mode all six meters may be used.




For assistance, please submit a ticket via our Support Portal, email autosol.support@autosoln.com or call 281.286.6017 to speak to a support team member.