Meter Runs Tab
Meter 1-18/Station Meter
Click […] to select or create the Meter Object assigned. See the Meter section for more details.
Meter Ordering
Meter run assignments in ACM are determined by meter type and position in the run listing above. Orifice meters are to be assigned before any Turbine/Linear meters (ROCPlus 800L).
Example: The ROC device has 2 Orifice Meters and 1 Turbine Meter. The resulting assignments would be:
Meter 01 = Orifice Meter
Meter 02 = Orifice Meter
Meter 03 = Turbine Meter
If an additional Orifice Meter is configured in the ROC device, the ACM assignments above would be changed to the following:
Meter 01 = Orifice Meter
Meter 02 = Orifice Meter
Meter 03 = New Orifice Meter
Meter 04 = Turbine Meter