See the Common Device Configuration guide for assistance configuring the General, Options, Details, and Logging tabs. See the Connection/Schedule page for assistance with the Connection tab. |
See the Common Modbus Configuration (Device Tab) page.
Default = Not selected. Select this to configure and allow requests to be made.
Click to select or create the Connection Object assigned to this device. See the Time Synchronization section for more details.
Select the desired Time Synchronization Interval relating to the Schedule object assigned on the Connection tab. Time Synchronization checks occur on the frequency of this interval.
Default = UTC-06:00 Central Time (US & Canada).
Select the desired Interval relating to the Schedule object assigned on the Connection tab. Record collection will occur at a frequency based on the configuration of this interval.
Default = Not selected. Select the appropriate Cards to be collected for Card Collection.
Click to select or create the Meter Object assigned for the CycleLog. See the Meter section for more details.
Default = 30. User defined time difference between surface card and pump card in the same card index. If time difference is less than defined, the pump card will use surface card time stamp. This field is in seconds.
Default = Selected. If selected, the system will retrieve only the most recent shutdown card in the stack.