See the Common Device Configuration guide for assistance configuring the General, Options, Details, and Logging tabs. See the Connection/Schedule page for assistance with the Connection tab. |
See the DF1 Configuration page.
Default = Disabled. Enable this to configure and allow requests to be made.
Connection Object assigned to this device. Click to select or create one. See the Time Synchronization section for more details.
Select the desired Time Synchronization Interval relating to the Schedule object assigned on the Connection tab. Time Synchronization checks occur on the frequency of this interval.
Default = UTC-06:00 Central Time (US & Canada).
Define where ACM can find the PLC’s current time. Data is expected to be in the following order: Year, Month, Day, Hour, Minute, Second.
Define where ACM should write time to set the PLC’s clock.
Collection Priorities
Set the Collection Interval for Daily History, Hourly History, Event, and Meter Config collection.
Collection Intervals
Set the Collection Priority for Daily History, Hourly History, Event, and Meter Config collection.
GC Write Config
Click on to select or create the appropriate Gas Chromatograph object. This object will be used to provide addresses for GC Download (ACM write to PLC).
Collection Limits
Set the Collection Limits for Daily, Event and Hourly.
Record Upload Timeout
The maximum time in seconds allowed for PLC to upload a record from the flow computer.
Meter 1-20. Select the meter run to configure.
Default = Not Selected. Select to enable collection.
Click to select or create the Meter Object assigned to this meter run number.
See the Meter section for more details.
Click to select or create a Configurable Archive. See the Configurable Archive section for more details.