Page Comparison

Recommended Configuration Steps

General Tab

See the General Object Configuration page.

Options Tab

See the Device Object General Options page.

Details Tab

See the Device Object General Details page.

Logging Tab

See the Device Object General Logging page.

Connection Tab

See the Device Object General Connection/Schedule page.

Device Tab

See the Common Modbus Configuration (Device Tab) page.

SCADAPack Tab

Image Removed

Command Retries

Default = 5. The maximum number of retries to use when sending a command message during history retrieval.

Pass Code

Default = 1. Pass code field for security.

User Number

Default = 1. User number field for security.

Time Sync Tab

Image Removed

Enable Time Synchronization

Default = Not selected. Select this to configure and allow requests to be made. 

Time Synchronization Configuration

Click Image Removed to select or create the Connection Object assigned to this device. See the Time Synchronization section for more details.

Time Synchronization Interval

Select the desired Time Synchronization Interval relating to the Schedule object assigned on the Connection tab. Time Synchronization checks occur on the frequency of this interval.

Time Synchronization Priority

• Low. Queues up with other Low priority items.
• Medium (Default). Interrupts Low priority items, and queues up with other Medium priority items.
• High. Interrupts Medium and Low priority items, and queues up with other High priority items.

Timezone

Default = UTC-06:00 Central Time (US & Canada).

Archive Collection Tab

Image Removed

Collection Priority

• Low (Default).Queues up with other Low priority items.
• Medium. Interrupts Low priority items, and queues up with other Medium priority items.
• High. Interrupts Medium and Low priority items, and queues up with other High priority items.

Acknowledge Alarms

Default = Selected. Acknowledge alarms after retrieval and storage. Note, if this option is not selected, the same alarms may be retrieved more than once.

Acknowledge Events

Default = Selected. Acknowledge events after retrieval and storage. Note, if this option is not selected, the same events may be retrieved more than once.

Purge DLogs

Default = Not selected. Select to purge records from the data log after retrieval and storage.

Publish Audit Batch Fields

Default = Not selected. Select to publish batch related fields contained in audit records. Note, valid only for devices that support batch.

Adjust Record

Default = Not selected. Select to round up hourly and daily ending timestamps if they are within one second of the hour.

Publish Raw Event Data

Default = Not selected. Select to publish raw event bytes as a field in the event record.

Use Leading Timestamp

Default = Not selected. Select to use a leading timestamp in the EFM Record (this setting only applies to 32 Bit Controllers with Flow Computer versions 6.70 and higher).

Alarm/Event Block

Default = 13. The number of alarm or event records to retrieve in a single request (this setting only applies to devices with Flow Computer version 5.20 or higher).

History Block Size

Default = 5. The number of hourly or daily records to retrieve in a single request (this setting only applies to devices with Flow Computer version 5.20 or higher).

Gas Composition Format

Default = Percent. Select the desired option to publish gas component data in percent or mole fraction values.

Collection Intervals

Select the desired Interval relating to the Schedule object assigned on the Connection tab. Record collection will occur at a frequency based on the configuration of this interval.

Meter Runs Tab

Image Removed

Meter 1-10

Select the Meter number to edit.

Meter Object

Click Image Removed to select or create the Meter Object assigned for the meter run. See the Meter section for more details.

Collect Meter 1 Alarm

Default = Not selected. Select to configure and collect alarms for the selected meter run.

Alarm Archive

Click Image Removed to select or create an Archive Limits. See the Archive Limits section for more details.

Collect Meter 1 Daily

Default = Not selected. Select to configure and collect daily records for the selected meter run.

Daily Archive

Click Image Removed to select or create an Archive Limits. See the Archive Limits section for more details.

Collect Meter 1 Event

Default = Not selected. Select to configure and collect event records for the selected meter run.

Event Archive

Click Image Removed to select or create an Archive Limits. See the Archive Limits section for more details.

Collect Meter 1 Hourly

Default = Not selected. Select to configure and collect hourly records for the selected meter run.

Collect Meter 1 Gas Quality

Default = Not selected. Select to collect historical gas quality records for the selected meter run. Gas quality record data will be combined with the hourly flow record for the same time period.

This option is only valid for gas runs and 32 bit controllers running Flow Computer version 6.77 and higher.

Collect Meter 1 Batch

Default = Not selected. Select to configure and collect batch records for the selected meter run.

Batch Archive

Click Image Removed to select or create an Archive Limits. See the Archive Limits section for more details.

Data Logs Tab

Image Removed

Collect DLogs 1-16

Default = Not selected. Select to collect DLog.

DLog Archive

Click Image Removed to select or create an Archive Limits. See the Archive Limits section for more details.

DLog Meter 1-16

Click Image Removed to select or create the Meter Object assigned for the meter run. See the Meter section for more details.

DLog Meter 1-16 Column Header

...

Recommended Configuration Steps

General Tab

See the General Object Configuration page.

Options Tab

See the Device Object General Options page.

Details Tab

See the Device Object General Details page.

Logging Tab

See the Device Object General Logging page.

Connection Tab

See the Device Object General Connection/Schedule page.

Device Tab

See the Common Modbus Configuration (Device Tab) page.

Time Sync Tab

Image Added

Enable Time Synchronization

Default = Not selected. Select this to configure and allow requests to be made. 

Time Synchronization Configuration

Click Image Added to select or create the Connection Object assigned to this device. See the Time Synchronization section for more details.

Time Synchronization Interval

Select the desired Time Synchronization Interval relating to the Schedule object assigned on the Connection tab. Time Synchronization checks occur on the frequency of this interval.

Time Synchronization Priority

• Low. Queues up with other Low priority items.
• Medium (Default). Interrupts Low priority items, and queues up with other Medium priority items.
• High. Interrupts Medium and Low priority items, and queues up with other High priority items.

Timezone

Default = UTC-06:00 Central Time (US & Canada).

Archive Collection Tab

Image Added

Collection Priority

• Low (Default).Queues up with other Low priority items.
• Medium. Interrupts Low priority items, and queues up with other Medium priority items.
• High. Interrupts Medium and Low priority items, and queues up with other High priority items.

Archives

Default = None selected. Select the checkbox next to the type of archive needed (Alarm, Event, etc.) and also select an Interval relating to the Schedule object assigned on the Connection tab. Record collection will occur at a frequency based on the configuration of this interval.

Archive Limits

Click Image Added to select or create an Archive Limits for each archive type. See the Archive Limits section for more details.

Meters Tab

Image Added

Meter 

Click Image Added to select or create the Meter Object assigned for the meter run. See the Meter section for more details.