Out of Maintenance Software Release Contents
- Cody Pannell
- Emma Fullilove (Deactivated)
Information about eACM Security can be found: AUTOSOL Security Center
Out of Maintenance Releases
*Use the "shift" key to sort by multiple columns.
Release | Application | Text | Affects Published Output | Addresses Security Vulnerability |
|---|---|---|---|---|
eACM 2.5.3.1 | AUTOSOL App Manager 2.5.3.1 | Adds further compression to serving of UI files |
|
|
eACM 2.5.3.1 | AUTOSOL Bridge 2.0.0.4 | Corrects the display and backfill of DateTime OPC tags |
|
|
eACM 2.5.3.1 | AUTOSOL Edge MQTT 1.3.0.2 | Corrects an issue preventing NDEATHs and DDEATHs from being sent on a clean shutdown |
|
|
eACM 2.5.3.1 | AUTOSOL Edge MQTT 1.3.0.2 | Corrects an issue that caused the app to stop publishing when a rebirth request was received at the same moment a broker disconnect occurred. |
|
|
eACM 2.5.3.1 | Edge ACM 2.1.0.1 | Adds validation to ensure no duplicate tags exist in a device across multiple tag groups |
|
|
eACM 2.5.3.1 | Edge ACM 2.1.0.1 | Corrects an issue that caused an incorrect timestamp to occasionally appear in log files |
|
|
eACM 2.5.3.1 | Edge ACM 2.1.0.1 | Corrects an issue where changing mac addresses would cause the current license to be invalid |
|
|
eACM 2.5.3.0 | AUTOSOL App Manager 2.5.3.0 | App Manager now supports TLS MQTT for configuration |
|
|
eACM 2.5.3.0 | AUTOSOL App Manager 2.5.3.0 | With this, a new file property has been implemented. You can now upload small files like certificates. |
|
|
eACM 2.5.3.0 | AUTOSOL App Manager 2.5.3.0 | Future versions will implement the file property in other file related configuration settings. |
|
|
eACM 2.5.3.0 | Azure 1.1.0.1 | Added ability to publish 64-bit and datetime tags |
|
|
eACM 2.5.3.0 | Azure 1.1.0.1 | Updated certificates for authentication |
|
|
eACM 2.5.3.0 | Edge ACM 2.1.0.0 | Added ability to publish communication statistics for end devices |
|
|
eACM 2.5.3.0 | Edge ACM 2.1.0.0 | Quality update messages now sent through internal tag sockets |
|
|
eACM 2.5.3.0 | Edge MQTT Publisher 1.3.0.0 | Added ability to publish data from multiple data source applications |
|
|
eACM 2.5.3.0 | Edge MQTT Publisher 1.3.0.0 | Added ability to publish quality data for tags in Sparkplug B metrics |
|
|
eACM 2.5.3.0 | Edge MQTT Publisher 1.3.0.0 | Added ability to send DDEATH messages when an end device is disconnected |
|
|
eACM 2.5.3.0 | Edge MQTT Publisher 1.3.0.0 | MQTT Start/Stop/Restart script updated to stop the application in a safer way |
|
|
eACM 2.5.3.0 | File Handler 1.0.0.0 | Allow users to publish any files over MQTT in base64 format. These can be resolved as images by some client applications or converted back to a file. |
|
|
eACM 2.5.3.0 | File Handler 1.0.0.0 | Individual scanner objects each monitor a single folder for new files |
|
|
eACM 2.5.3.0 | File Handler 1.0.0.0 | Files are published via the Edge MQTT Publisher app |
|
|
eACM 2.5.3.0 | File Handler 1.0.0.0 | Files beyond a specified maximum are removed to avoid infinite growth from the uploading service(s) |
|
|
eACM 2.4.2.1 | AUTOSOL Edge MQTT 1.2.0.1 | Corrects an issue with 8-bit signed and unsigned writes |
|
|
eACM 2.4.2.1 | Edge ACM 2.0.0.6 | Corrects an issue with Modbus double and character writes on 64-bit systems |
|
|
eACM 2.4.2.1 | Edge ACM 2.0.0.6 | Corrects an issue in updates after writes where value was within Deadband |
|
|
eACM 2.4.2.1 | Edge MQTT Publisher 1.2.0.2 | Corrects an issue where certain configurations could lead to null DDATA messages being sent |
|
|
eACM 2.4.2.1 | Edge MQTT Publisher 1.2.0.2 | Corrects metric aliasing to better fit Sparkplug B standard |
|
|
eACM 2.4.2.0 | AUTOSOL App Manager 2.4.2.0 | Corrects an issue which could cause Edge ACM to fail to generate the license request file when no config data was present |
|
|
eACM 2.4.2.0 | AUTOSOL App Manager 2.4.2.0 | Corrects issues with the install process on the IQ platform |
|
|
eACM 2.4.2.0 | AUTOSOL App Manager 2.4.2.0 | Corrects issues with dependencies on latest cryptography module |
|
|
eACM 2.4.2.0 | Edge ACM 2.0.0.5 | Adds write verification poll |
|
|
eACM 2.4.2.0 | Edge ACM 2.0.0.5 | Corrects an issue where updates were not sent on return to normal quality |
|
|
eACM 2.4.2.0 | Edge MQTT Publisher 1.2.0.0 | Adds the ability to publish arrays in three different formats |
|
|
eACM 2.4.2.0 | Edge MQTT Publisher 1.2.0.0 | Adds the ability to send all NULL values in DBIRTH messages |
|
|
eACM 2.4.2.0 | Edge MQTT Publisher 1.2.0.0 | Updates publishing to ensure backfill data is always published in chronological order |
|
|
eACM 2.4.2.0 | Edge MQTT Publisher 1.2.0.0 | Corrects an issue with backfill files not being created if directory is within one step of the root folder |
|
|
eACM 2.4.2.0 | Edge MQTT Publisher 1.2.0.0 | Corrects an with backfill files breaking if the tag name had a forward slash |
|
|
eACM 2.4.2.0 | Edge MQTT Publisher 1.2.0.0 | Corrects an issue with backfill not working if “Serialized Publishing” was enabled |
|
|
eACM 2.3.1.0 | AUTOSOL App Manager 2.3.1.0 | Tree search was added. |
|
|
eACM 2.3.1.0 | AUTOSOL App Manager 2.3.1.0 | Collapse tree was added. |
|
|
eACM 2.3.1.0 | AUTOSOL App Manager 2.3.1.0 | Corrects an issue with how the tree and item views scrolled and overlapped |
|
|
eACM 2.3.1.0 | AUTOSOL App Manager 2.3.1.0 | Corrects issues that caused items to be orphaned after an import to a folder. |
|
|
eACM 2.3.1.0 | Edge ACM 2.0.0.4 | ‘Alias’ property on Tag objects changed to ‘Name' |
|
|
eACM 2.3.1.0 | Edge ACM 2.0.0.4 | The Tag CSV files from previous versions will need to be manually updated so that the column header says ‘Name’ before importing into this latest version. |
|
|
eACM 2.3.1.0 | Edge ACM 2.0.0.4 | Corrects an issue with Modbus RTU register set |
|
|
eACM 2.3.1.0 | Edge ACM 2.0.0.4 | Corrects an issue with Custom Modbus register sets |
|
|
eACM 2.3.1.0 | Edge ACM 2.0.0.4 | Corrects an issue with polling String tags from Modbus OMNI |
|
|
eACM 2.3.1.0 | Edge MQTT Publisher 1.1.0.0 | Implemented Verbose logging |
|
|
eACM 2.3.1.0 | Edge MQTT Publisher 1.1.0.0 | Adds the ability to include timestamp in current data metrics |
|
|
eACM 2.3.1.0 | Edge MQTT Publisher 1.1.0.0 | Corrects Sparkplug B sequencing issue that could arise when multiple devices published rapidly |
|
|
eACM 2.3.1.0 | Edge MQTT Publisher 1.1.0.0 | Corrects issue where backfill files were being created for tags where backfill was not enabled |
|
|
eACM 2.3.1.0 | Edge MQTT Publisher 1.1.0.0 | Corrects an preventing backfill files from being created if there were forward slashes in the tag name |
|
|
eACM 2.3.1.0 | Edge MQTT Publisher 1.1.0.0 | Corrects an issue that could cause Edge MQTT Publisher to crash if the initial values for tags was null data |
|
|
eACM 2.3.1.0 | Edge MQTT Publisher 1.1.0.0 | Corrects an issue where null initial tag data was being published as zeros instead of null |
|
|
eACM 2.3.1.0 | Edge MQTT Publisher 1.1.0.0 | Adds verification to make sure Keep Alive is never set below 5 seconds |
|
|
eACM 2.3.1.0 | Edge MQTT Publisher 1.1.0.0 | Corrects an issue with Sparkplug B STATE message decoding |
|
|
eACM 2.2.1.1 | Edge ACM 2.0.0.3 | Corrects an issue that prevented logs from rotating at 1mb |
|
|
eACM 2.2.1.1 | Edge ACM 2.0.0.3 | Corrects an issue where the app would stop publishing when flooded with rebirth requests |
|
|
eACM 2.2.1.0 | AUTOSOL App Manager 2.2.1.0 | HTTPS can now be enabled and disabled on the webserver. HTTPS is disabled by default. |
|
|
eACM 2.2.1.0 | AUTOSOL App Manager 2.2.1.0 | Adds the ability to log in with a username and password. The default is admin/admin. |
|
|
eACM 2.2.1.0 | AUTOSOL App Manager 2.2.1.0 | Corrects an issue with tag groups and how the file is loaded. |
|
|
eACM 2.2.1.0 | AUTOSOL App Manager 2.2.1.0 | Changes the wording on the App Manager connection status for clarity. |
|
|
eACM 2.1.0 | AUTOSOL App Manager 2.1.0 | AUTOSOL App Manager can now manage AUTOSOL Bridge |
|
|
eACM 2.1.0 | AUTOSOL App Manager 2.1.0 | You can now delete log files from the Log Viewer page. |
|
|
eACM 2.1.0 | AUTOSOL App Manager 2.1.0 | App Manager now supports configuration object commands |
|
|
eACM 2.1.0 | Edge ACM 2.1.0 | Edge ACM and Edge MQTT Publisher have better start up validation in order to prevent false start ups. |
|
|
eACM 2.1.0 | Multiple | Ping target (ipv4) has been implemented in Connection objects across different applications |
|
|
eACM 2.0.3 | Edge MQTT Publisher | Fixed memory leak issue in Edge MQTT Publisher Sparkplug B Publisher |
|
|
eACM 2.0.3 | Edge MQTT Publisher | Fixed issue in Edge MQTT Publisher where subscriptions were lost by broker after a broker restart |
|
|
eACM 2.0.3 | Edge MQTT Publisher | Fixed issue in Edge MQTT Publisher where back fill to disk could corrupt a file if power loss occurs during write |
|
|
eACM 2.0.0 | AUTOSOL App Manager 2.0.0 | In an effort to improve future development as well as bug fixes, our AUTOSOL App Manager and our Edge Managers were redesigned to use the same base code. |
|
|
eACM 2.0.0 | AUTOSOL App Manager 2.0.0 | Communication between the Universal and Edge Managers is now exclusively through the MQTT protocol. |
|
|
eACM 2.0.0 | AUTOSOL App Manager 2.0.0 | Edge Manager (formerly App Manager) ships with its own web configuration site which will be available for initial configuration or any other local changes. | X |
|
eACM 2.0.0 | AUTOSOL App Manager 2.0.0 | Both Managers utilize the same User Interface. The improved tree view allows you to quickly change and configure items across different nodes in your network. The UI is accessible through HTTP on any browser. |
|
|
eACM 2.0.0 | AUTOSOL App Manager 2.0.0 | Multiple configuration tabs are now available. Like in other AUTOSOL products, we have now implemented tabs in our configuration interface. You will be able to quickly view and compare different items across your network of nodes. |
|
|
eACM 2.0.0 | AUTOSOL App Manager 2.0.0 | The Import/Export functionality has been expanded to apply to all types of items. You can import/export a whole Node, a single App, or a single Object. | X |
|
eACM 2.0.0 | AUTOSOL App Manager 2.0.0 | System Information now displays further information about the state of the manager. You can download that information as a report file from the System Info page. |
|
|
eACM 2.0.0 | AUTOSOL App Manager 2.0.0 | Log Viewer now has a way to download all log files from the system in a zipped archive format. |
|
|
eACM 2.0.0 | Azure 1.0.0 | Azure application has been released with version 1.0.0 |
|
|
eACM 2.0.0 | Azure 1.0.0 | Azure publishes Edge ACM device item updates on a report-by-exception basis to Azure IoT Hub via Device-to-Cloud telemetry |
|
|
eACM 2.0.0 | Azure 1.0.0 | Azure writes to Edge ACM device items when a write request is received via Azure IoT Hub Cloud-to-Device messages |
|
|
eACM 2.0.0 | Edge ACM 2.0.0 | Edge ACM design has changed to publish protocol data to an Internal Tag server to which Edge MQTT Publisher and Azure publishing apps can connect. |
|
|
eACM 2.0.0 | Edge MQTT Publisher 1.0.0 | New ability to publish as multiple nodes from single device |
|
|
eACM 2.0.0 | Edge MQTT Publisher 1.0.0 | Support for MQTT TLS added |
|
|
eACM 2.0.0 | Edge MQTT Publisher 1.0.0 | Support for MQTT Protocol Version 5 added |
|
|
eACM 2.0.0 | Edge MQTT Publisher 1.0.0 | Added ability to set custom Client ID on broker connections |
|
|
eACM 2.0.0 | Edge MQTT Publisher 1.0.0 | Advanced timing options added |
|
|
eACM 2.0.0 | Edge MQTT Publisher 1.0.0 | Primary Host ID functionality added |
|
|
eACM 2.0.0 | Edge MQTT Publisher 1.0.0 | Added ability to back fill data to disk upon connection loss or primary host disconnect |
|
|
eACM 2.0.0 | Edge MQTT Publisher 1.0.0 | Added ability to split back fill messages with a set number of values per tag |
|
|
eACM 2.0.0 | Edge MQTT Publisher 1.0.0 | Added ability to hard code a delay time between births |
|
|
eACM 1.0.0 | AUTOSOL App Manager 1.0.0 | System information now shows the versions of the applications installed. |
|
|
eACM 1.0.0 | AUTOSOL App Manager 1.0.0 | Data models now support multiple references to other data models. |
|
|
eACM 1.0.0 | AUTOSOL App Manager 1.0.0 | Partial imports are now supported. |
|
|
eACM 1.0.0 | AUTOSOL App Manager 1.0.0 | Preliminary backwards compatibility modifications were implemented. |
|
|
eACM 1.0.0 | AUTOSOL App Manager 1.0.0 | The new import.log will show what items were modified. |
|
|
eACM 1.0.0 | AUTOSOL App Manager 1.0.0 | If a data model changes, App Manager can import most of the configuration. |
|
|
eACM 1.0.0 | AUTOSOL App Manager 1.0.0 | An uninstaller has been added. |
|
|
eACM 1.0.0 | Edge ACM 1.1.0 | You can now download an empty CSV header file from a Tag Group in Edge ACM. |
|
|
eACM 1.0.0 | Edge ACM 1.1.0 | Support for fully custom Modbus register sets has been added. |
|
|
eACM 1.0.0 | Edge ACM 1.1.0 | Added a schedule object that can be assigned to tag groups. NOTE: Poll Interval has been moved from the Connection Settings object to this new schedule object. |
|
|
eACM 1.0.0 | Edge ACM 1.1.0 | Devices now support multiple tag groups. |
|
|
eACM 1.0.0 | Priority Forward 2.0.0 | Priority Forward has been updated to version 2.0.0 |
|
|
eACM 1.0.0 | Priority Forward 2.0.0 | Connections have been renamed to Channels and now support advance settings. |
|
|
eACM 1.0.0 | Priority Forward 2.0.0 | The priority client can be delayed from forwarding until after a millisecond configured timeout. |
|
|
eACM 1.0.0 | Priority Forward 2.0.0 | Connection retries and retry intervals from the Priority and Secondary down to the end device are now configurable. |
|
|
eACM 1.0.0 | Priority Forward 2.0.0 | Priority Forward logs are much more descriptive and useful. |
|
|
For assistance, please submit a ticket via our Support Portal, email autosol.support@autosoln.com or call 281.286.6017 to speak to a support team member.