Page Comparison

...

• Increased the number of station meters from 24 to 72.
• Added new objects, parameters, measurement types, and units in support of the April 2020 FB3000 Firmware releaseversion 02.03.01.04 (also referenced as 2.3.1.4).
• Added the options to publish unmapped events and/or alarms to all meters.

...

• Corrected an issue that prevented multi-editor filters from opening in ACM Configuration when the Server Data Path had been changed in ACM Monitor.
• Corrected an issue where an erroneous data type could cause ACM to crash.

ACM Publishing

• Corrected an issue that caused duplicate records to be added to the EFM Database. Instead of adding new meter records, all existing meter records will be updated if one or more matching meter records are found.

...

• Corrected an issue causing extended protocol items such as “MoveHourly” and “RetrieveHistory” to indicate a bad or failed status after a write from an OPC client.
• Corrected a bug that did not correctly identify a meter factor change event in a ROC 80x when the meter factor was in manual mode.

• Corrected an issue returning a "***Requested too many events***" message when the event or alarm archive wraps around to the top.

  Note
  title Effect on Published Output
  Events and alarms that were not being published due to this issue will now be published.

  
  

• Corrected batch record processing to map the batch record to the correct meter configured in the external map when the external map is applied.

  
  

  Note
  title Effect on Published Output
  The record will be output as the correct meter.

  
  

...

• Corrected an issue that caused EFM history records to always be published with a value of 60 for the $$Record.Period$$ field.

  Note
  title Effect on Published Output
  EFM history records are now published with the correct value in the $$Record.Period$$ field.

  
  

• Corrected an issue that prevented the LogTrigger column from appearing on a CSV Audit Report.

  Note
  title Effect on Published Output
  The CSV audit report will contain the LogTrigger column by default. This may add an additional column to the CSV report.

  
  

• Modified the contents of the LogTrigger column in a CSV Audit Report to contain the entire T&A value.

  Note
  title Effect on Published Output
  The LogTrigger column in the CSV audit report will now contain the entire T&A field value.

  
  

• Corrected an issue that could cause non-time triggered audit records to be published even when the ACM device object was not configured to do so.

  Note
  title Effect on Published Output
  Non time-triggered audit records will only be published if the ACM device object is configured to do so.

  
  

• Corrected an issue that caused history upload to continue despite a failure to read audit configuration.

• Corrected an issue that prevented the K-Factor value from being published.

  Note
  title Effect on Published Output
  Non time-triggered audit records will only be published if the ACM device object is configured to do so.

  
  

Siemens S7 Protocol

• Resolved an issue with OPC item Read/Write access showing only Writable and not Readable.

Totalflow Protocol

• Modified the driver to stop history collection if meter configuration retrieval failed and no meter configuration data has been retrieved previously. If meter configuration data has previously been retrieved the history collection will continue.
• Modified the initial OPC quality of “MoveEvent” to be “Good” to match the other "Move" items.
• Corrected an issue that caused the "Request 3 days of history when 2 days history is needed" option to be ignored.