...
| Command | Description | Parameters |
|---|---|---|
Test Communication | When executed, ACM will poll a known OPC item from the device and wait for the response to see if the communication is good. | None |
| Retrieve History | Requests the retrieval of history records (for all enabled meters). | None |
| Retrieve meter config during next history poll | Retrieves meter configuration data during the next history retrieval | None |
| Retrieve Product Information during next history poll | Retrieves product configuration data during the next history retrieval | None |
| Reset Archive | Clears the archive retrieval position so retrieval starts at the oldest record or record by limit count. Provide the meter archive number in parameter one, or leave blank for all metersarchives. | Archive Number |
| Reset Alarm Pointer | Clears the alarm retrieval position so retrieval starts at the oldest record or record by limit count. | None |
| Reset Event Pointer | Clears the event retrieval position so retrieval starts at the oldest record or record by limit count. | None |
| Reset Report | Reset the position for auto-report collection. Provide the value for the desired template (1=Batch; 2=Prove; 3=Daily; 4=Detail; or leave blank for all). | Report Number |
| Move Archive | Moves the saved archive retrieval position to an older record. Provide the meter archive number in parameter one, or leave blank for all metersarchives. Enter the number of records to move back in second parameter. | Archive Number Record Count |
| Move Alarm | Moves the saved alarm retrieval position to an older record. Enter the number of records to move back in the parameter. | Record Count |
| Move Event Pointer Back | Moves the saved event retrieval position to an older record. Enter the number of records to move back in the parameter. | Record Count |
| Skip Archive | Moves the saved daily retrieval position forward. Provide the record count archive number in parameter one, or leave blank for all metersarchive. Enter the number of records to skip in second parameters. | Archive Number Reset Archive |
| Time Sync | Causes a comparison of the date and time in the device to the host date and time. Once compared, the configured rules of the selected time sync object will be applied - including time zone and daylight saving options. | None |
| Request Alarm Report | Request Alarm Report | None |
| Request Batch Report | Request one of the available batch text reports. Enter the report number (1 = most recent; 8 355 = oldest) or leave blank for the most recent report. | Report Number |
| Request Prove Daily Report | Request one of the available prove daily text reports. Enter the report number (1 = most recent; 8 35 = oldest) or leave blank for the most recent report. | Report NumberRequest Daily |
| Request Initialization Report | Request Initialization Report | None |
| Request Measurement Report | Request Measurement Audit Report | None |
| Request Product Report | Request the Product report for device. Parameter only required for Gas/Liquid and requesting Liquid Products. Enter 1 for Gas report and 2 for Liquid report. (Blank will use 1) | Product Type |
| Request Prove Report | Request one of the available daily text prove reports. Enter the report number (1 = most recent; 8 35 = oldest) or leave blank for the most recent report. | Report Number |
| Request Snapshot Report | Request the Snapshot report for device. Parameter only required for Gas/Liquid and requesting Liquid Products. Enter 1 for Gas report and 2 for Liquid report. (Blank will use 1) | Report Number |
| Request Status Report | Request the snapshot Status report. | None |
| Request Miscellaneous System Audit Report | Request the miscellaneous System Audit report. | None |
| Request Template A Report | Request one of the available template A reports. Enter the value for the desired template (1=Snapshot; 2=Batch; 3=Daily; 4=Prove). | Report Number |
| Request Ethernet Configuration Template B Report | Request one of the available Ethernet configuration template B reports. Enter the value for the desired report template (1 - 3=Snapshot; 2=Batch; 3=Daily; 4=Prove). | Report Number |
| Read Configuration Information | Re-read the firmware and date format from the OMNI on the next retrival. | None |
| Read Custom Packet Configuration | Re-read the custom packet configuration from the OMNI. | None |
| Read Archive Configuration | Re-read the archive configuration from the OMNI. Use this command to make ACM read the configuration of one or more OMNI archives. Note that this command is sent automatically if ACM detects that the data size of an archive record does not match the size reported in a previous archive configuration read. | None |
| Reset Report | Reset the positions for auto-report collection. | None |
| Read Product Information | Re- read the product names and data from the OMNI. | None |
| Document Periodic Register | Write the internal register map used for periodic (hourly/daily) records to the server machine file "C:\ProgramData\AutoSol\CommunicationManager\7\asiMODBUS_OMNI_PERIODIC_REGISTER_DOC.txt" | None |
| Document Batch Register | Write the internal register map used for batch records to the server machine file "C:\ProgramData\AutoSol\CommunicationManager\7\asiMODBUS_OMNI_BATCH_REGISTER_DOC.txt" | None |
| Document Prove Register | Write the internal register map used for prove records to the server machine file "C:\ProgramData\AutoSol\CommunicationManager\7\asiMODBUS_OMNI_PROVE_REGISTER_DOC.txt" | None |
...