This item is Connection settings are used by the End Device item. It defines protocol device object. These settings define the connection thethat Edge DeviceACM will use to connect to the End DeviceEvery End Device RTU or PLC. Every protocol device requires a Connection Settings object, so it is suggested you create this before creating the End Device protocol device object.
Configuration
...
Property | Description |
|---|---|
Name | The name of this item |
Host IP | The IP address of the End Device you will connect to |
Host Port | The port of the End Device you will connect to |
Connection Timeout (ms) | The time, in milliseconds, Edge ACM will wait for a response from the End Device after trying to connect |
Connection Interval (ms) | The time, in milliseconds, Edge ACM will wait before attempting to reconnect to the end device after a disconnect |
Response Timeout (ms) | The time, in milliseconds, Edge ACM will wait for a response from the End Device before retrying the message |
Timer Tick (ms) | The interval, in milliseconds, Edge ACM uses to check the above timeouts |
Poll retries | The number of times a poll message will be tried before a reconnect is attempted |
Folder | The parent folder for this item |