Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Information about eACM Security can be found:  AUTOSOL Security Center

Releases In Active Maintenance

*Use the "shift" key to sort by multiple columns.

ReleaseApplicationTextAffects Published OutputAddresses Security Vulnerability
eACM 3.1.4.0AUTOSOL Bridge 2.1.1.5Adds a new tag "{NodeID}.Online" to display the node status.  When a DDEATH or NDEATH occurs, the value will be false.

eACM 3.1.4.0AUTOSOL Bridge 2.1.1.5Corrects an issue where the timestamps on internal bridge tags weren't updated when the values were updated.

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0When tag groups are copied, the number one (1) will no longer be appended to all tag names.

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0Corrects an issue that occurred when importing multiple references

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0Prevents multiple tabs from being opened for the same object.

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0Corrects an issue that caused Refresh Item Values to display the wrong selection in dropdowns

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0Modifies installation so that it will continue past an error in a PIP install and log the error instead.

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0Corrects an issue that prevented the License tab from displaying in AAM.

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0Corrects an issue in AAM that indicated the broker was connected, even after disabling it and restarting MQTT.

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0Unused binaries will be removed once an installation is complete, or when a given module is restarted. 

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0AUTOSOL App Manager can now be registered as a Windows Service.

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0Corrects an issue causing the .zip file to open in a new tab instead of downloading.

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0Adds the ability to uninstall software modules via AAM.

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0Corrects an issue caused by importing tags or other objects to a Node through AAM.

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0The configuration file for asiBridge will now be created when installing AAM.

eACM 3.1.4.0AUTOSOL App Manager 3.1.4.0Corrects multiple vulnerabilities in Web UI. 

eACM 3.1.4.0Client ScriptsResolves an issue when processing CSV files with blank lines.

eACM 3.1.4.0Client ScriptsUpdated Duplicate Node script to allow for non-standard SSH ports.

eACM 3.1.4.0Edge ACM 2.3.0.0Adds options to configure logging TX Data, RX Data, information and errors.

eACM 3.1.4.0Edge ACM 2.3.0.0Adds support for real time polling of GE SRTP.

eACM 3.1.4.0Edge ACM 2.3.0.0Comm Stat tags now properly update when Edge ACMloses connection to end-devices.

eACM 3.1.4.0Edge ACM 2.3.0.0Prevents a segmentation fault from occurring when Edge ACMis shutting down.

eACM 3.1.4.0Edge ACM 2.3.0.0Adds ability to poll a ROC device with ROC security settings.

eACM 3.1.4.0Edge ACM 2.3.0.0Adds the ability to set a quiet delay on devices. The quiet delay range is 0 to 60000 (ms).

eACM 3.1.4.0Edge ACM 2.3.0.0Corrects an issue that prevented triggers from overriding deadband settings.

eACM 3.1.4.0Edge ACM 2.3.0.0Corrects an issue where tags with Every Scan enabled would publish more often than when the tag was polled. Corrects an issue where enabled Comm Stat tags could cause null data to appear in published DBIRTH messages.

eACM 3.1.4.0Edge ACM 2.3.0.0Real time data timestamps are now accurate to the millisecond. *Effect on published output: Timestamps recorded in Edge ACM and File Handler are now accurate to the millisecond. The timestamps were originally recorded while publishing in MQTT because Edge ACM was only recording timestamps accurate to the second. This change can be seen by inspecting the tag server JSON from Edge ACM to see that the timestamps are being used when publishing.X
eACM 3.1.4.0Edge MQTT Publisher 2.1.0.0Perform device rebirths with the tag: Device Control/Rebirth.

eACM 3.1.4.0Edge MQTT Publisher 2.1.0.0Corrects an issue that could cause MQTT to crash if the backfill disk location was left empty.

eACM 3.1.4.0Edge MQTT Publisher 2.1.0.0Improves the publishing speed for the Standard publisher.

eACM 3.1.4.0Edge MQTT Publisher 2.1.0.0DBIRTH messages will now include the current tag value by default. The option 'Include backfill and the current value in Birth Message' will include backfill in the birth message followed by the tags current value. If split backfill is used, and the amount of backfill exceeds the limit set, the DBIRTH message will fill with backfill and will be followed by DDATA messages that contain backfill as expected. The current value will be included on the last DDATA message in this case. *Effect on published output: DBIRTH messages will include current values by default. The exception is when split backfill is used and the backfill causes historical DDATA's to be used. The current value in this case will immediately follow the last historical metric.X
eACM 3.1.4.0Edge MQTT Publisher 2.1.0.0Metric timestamps can now be disabled and will only be included in metrics when enabled. *Effect on published output: Timestamps can be included in metrics correctlyX
eACM 3.1.4.0Edge MQTT Publisher 2.1.0.0Corrects an issue in the database information default path.

eACM 3.1.4.0Edge MQTT Publisher 2.1.0.0Corrects issue that caused MQTT to crash when an invalid alias was written to during start up.

eACM 3.1.4.0Edge MQTT Publisher 2.1.0.0Adds the ability for MQTT to run on ubuntu 22.04.

eACM 3.1.4.0Edge MQTT Publisher 2.1.0.0Corrects an that could cause MQTT to crash while publishing split backfill data.

eACM 3.1.4.0Edge MQTT Publisher 2.1.0.0An issue with the message publish rate for Publishers with Split Backfill enabled has been resolved. *Effect on published output: 'Delay Between Publishes (ms)' is followed for split backfill loaded messages (DBIRTH and DDATA containing only backfill data).X
eACM 3.1.4.0Edge MQTT Publisher 2.1.0.0Adds descriptive error messages when using the command line option for custom database credentials. *Effect on published output: New error messages will be shown regarding the config.ini search pathX
eACM 3.1.4.0OPC UA 1.1.0.0OPC UA will no longer start by default at install, but will only start when manually enabled by user.

eACM 3.1.4.0OPC UA 1.1.0.0Compatibility update: 1.0.0.0 to 1.1.0.0  to work with Edge ACM 2.3.0.0

eACM 3.1.4.0Priority Forward 2.0.0.2Resolves an issue where an empty PID file could prevent the app from starting up.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0With Edge ACM 3.0.4.0 comes the ability to install and update AUTOSOL modules from AUTOSOL App Manager. View the Software Updates User Guide for more information.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Adds the ability to install and update AUTOSOL modules from AUTOSOL App Manager.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Remote installs and upgrades are transported over MQTT and local upgrades are transported over HTTP through the local web server.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Adds Edge OPC UA to present real-time data from field devices.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Adds the ability to configure maximum log size for File Handler, MQTT, and eACM.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Adds the Bridge logging paths under the logging tab in AAM

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Adds progress indicators in the import module.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Modifies the import and export functionality to use Excel files to properly import and export array object types.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Prevents multiple imports from occurring at the same time.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Improves the method for selecting multiple references in properties, e.g. selecting tag groups for a device.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Improves logging when importing files containing duplicate name and IPs.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Corrects an issue that could cause the tree search function to lock up when switching pages.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Corrects an issue with the save function shortcut.

eACM 3.0.4.0AUTOSOL App Manager 3.0.4.0Corrects an issue that could cause tag groups to be unlinked from device objects after an import of tags.

eACM 3.0.4.0AUTOSOL Bridge 2.1.1.2Prevents unknown characters from being added to end of STATE messages.

eACM 3.0.4.0AUTOSOL Bridge 2.1.1.2Corrects a timestamp issue with asiBridge commands

eACM 3.0.4.0Client Scripts

Adds a script to remotely reboot edge devices.



eACM 3.0.4.0Client ScriptsAdds a script for remote collection of logs from field devices.

eACM 3.0.4.0Client ScriptsAdds a script to remotely start the core apps on multiple devices.

eACM 3.0.4.0Client ScriptsAdds a script to resolve duplicate Node IDs caused by cloning Edge systems.

eACM 3.0.4.0Client ScriptsCorrects an issue that prevented apps from restarting after an import script completes.

eACM 3.0.4.0Client ScriptsImproves logging when an import script starts or stops an app.

eACM 3.0.4.0eACM 3.0.4.0Edge ACM is now available for ARM32, ARM64 and AMD32

eACM 3.0.4.0Edge ACM 2.2.0.0Adds a new option, "Every Scan", to the "Deadband Type" tag. When used, the tag will be published every time, whether or not the value or quality have changed. *Effect on published output: When the "Every Scan" option is selected, the tag value be published every time, even if the value (or quality) has not changed.

eACM 3.0.4.0Edge ACM 2.2.0.0Modifies SparkplugB Aliases so that they are incremental. e.g. [0,1,2,3,...] rather than [0,3,5,6,...].

eACM 3.0.4.0Edge ACM 2.2.0.0Adds the ability to select specific comm stats and standard tags to publish with tags already assigned to a given device. This option is available on the device's "Comm Stats" tab. *Effect On Published Output: When specific comm stats and standard tags are selected, they will be published along with already assigned tags.

eACM 3.0.4.0Edge ACM 2.2.0.0Provides the ability to associate a Tag Group object with a specific MQTT publisher to publish tags via different MQTT publisher objects. A publisher schedule object must already exist in MQTT to use this feature.

eACM 3.0.4.0Edge ACM 2.2.0.0Adds an option to the Edge ACM properties tab to validate a license that has been uploaded through the UI.

eACM 3.0.4.0Edge ACM 2.2.0.0Adds an option for validating the apps license, using config.ini files in different paths, when running Edge ACM through the command line. To view the format for this option, include the flag "-h".

eACM 3.0.4.0Edge ACM 2.2.0.0Adds an option to create a new license request file when running Edge ACM through the command line. To view the format for this option, include the flag "-h".

eACM 3.0.4.0Edge ACM 2.2.0.0Tag server files that are created and required by Edge ACM(i.e. tagvaluechanges, tagmeta, tagwrite) will now automatically have the appropriate permissions.

eACM 3.0.4.0Edge ACM 2.2.0.0Active tags will be updated to show bad quality when Edge ACMis stopped.

eACM 3.0.4.0Edge ACM 2.2.0.0Corrects a bug with Tag Quality not reflecting correct quality in first reconnection DDATA message, DDATA message published before DDEATH, and some DBIRTH messages.

eACM 3.0.4.0Edge ACM 2.2.0.0If a single element in an array meets the requirements for an assigned trigger, the quality for the metric will be assigned to that trigger quality.

eACM 3.0.4.0Edge MQTT Publisher 2.0.0.0Adds the ability to compress Sparkplug B Payloads.

eACM 3.0.4.0Edge MQTT Publisher 2.0.0.0Adds a new option labeled "Publish Device Death" to the Advanced Sparkplug tab of a Sparkplug B Publisher. This option enables DDEATH messages to be published when a device is disconnected. Logs will show that a device has been disconnected whether or not this option is enabled. *Effect on Published output: When the "Publish Device Death" option is checked, DDEATH messages will be published when a device is no longer available.

eACM 3.0.4.0Edge MQTT Publisher 2.0.0.0Adds Publishing Schedules to allow specific data to be published through certain MQTT publishers.

eACM 3.0.4.0Edge MQTT Publisher 2.0.0.0Adds an option to use config.ini files in different paths when running MQTT via command line. To view the format for this option, include the flag "-h".

eACM 3.0.4.0Edge MQTT Publisher 2.0.0.0When MQTT is stopped, a DDEATH will be published for every connected device that was being published.

eACM 3.0.4.0Edge MQTT Publisher 2.0.0.0Corrects an issue that prevented MQTT from stopping when not connected to a data source.

eACM 3.0.4.0Edge MQTT Publisher 2.0.0.0Enhanced checks around handling STATE messages in Sparkplug B publisher

eACM 3.0.4.0File Handler 1.0.1.0Adds the ability to associate tag groups with different publish schedules so each tag group can be published at its own rate.

eACM 3.0.4.0File Handler 1.0.1.0Provides the ability to associate a Scanner object with a specific MQTT publisher to publish files via different MQTT publisher objects. A publisher schedule object must already exist in MQTT to use this feature.

eACM 3.0.4.0Priority Forward 2.0.0.1Corrects an issue that prevented the application from starting/restarting.

eACM 2.5.3.1AUTOSOL App Manager 2.5.3.1Adds further compression to serving of UI files

eACM 2.5.3.1AUTOSOL Bridge 2.0.0.4Corrects the display and backfill of DateTime OPC tags

eACM 2.5.3.1AUTOSOL Edge MQTT 1.3.0.2Corrects an issue preventing NDEATHs and DDEATHs from being sent on a clean shutdown

eACM 2.5.3.1AUTOSOL Edge MQTT 1.3.0.2Corrects an issue that caused the app to stop publishing when a rebirth request was received at the same moment a broker disconnect occurred.

eACM 2.5.3.1Edge ACM 2.1.0.1Adds validation to ensure no duplicate tags exist in a device across multiple tag groups

eACM 2.5.3.1Edge ACM 2.1.0.1Corrects an issue that caused an incorrect timestamp to occasionally appear in log files

eACM 2.5.3.1Edge ACM 2.1.0.1Corrects an issue where changing mac addresses would cause the current license to be invalid

eACM 2.5.3.0AUTOSOL App Manager 2.5.3.0App Manager now supports TLS MQTT for configuration

eACM 2.5.3.0AUTOSOL App Manager 2.5.3.0With this, a new file property has been implemented. You can now upload small files like certificates.

eACM 2.5.3.0AUTOSOL App Manager 2.5.3.0Future versions will implement the file property in other file related configuration settings.

eACM 2.5.3.0Azure 1.1.0.1Added ability to publish 64-bit and datetime tags

eACM 2.5.3.0Azure 1.1.0.1Updated certificates for authentication

eACM 2.5.3.0Edge ACM 2.1.0.0Added ability to publish communication statistics for end devices

eACM 2.5.3.0Edge ACM 2.1.0.0Quality update messages now sent through internal tag sockets

eACM 2.5.3.0Edge MQTT Publisher 1.3.0.0Added ability to publish data from multiple data source applications

eACM 2.5.3.0Edge MQTT Publisher 1.3.0.0Added ability to publish quality data for tags in Sparkplug B metrics

eACM 2.5.3.0Edge MQTT Publisher 1.3.0.0Added ability to send DDEATH messages when an end device is disconnected

eACM 2.5.3.0Edge MQTT Publisher 1.3.0.0MQTT Start/Stop/Restart script updated to stop the application in a safer way

eACM 2.5.3.0File Handler 1.0.0.0Allow users to publish any files over MQTT in base64 format. These can be resolved as images by some client applications or converted back to a file.

eACM 2.5.3.0File Handler 1.0.0.0Individual scanner objects each monitor a single folder for new files

eACM 2.5.3.0File Handler 1.0.0.0Files are published via the Edge MQTT Publisher app

eACM 2.5.3.0File Handler 1.0.0.0Files beyond a specified maximum are removed to avoid infinite growth from the uploading service(s)

eACM 2.4.2.1AUTOSOL Edge MQTT 1.2.0.1Corrects an issue with 8-bit signed and unsigned writes

eACM 2.4.2.1Edge ACM 2.0.0.6Corrects an issue with Modbus double and character writes on 64-bit systems

eACM 2.4.2.1Edge ACM 2.0.0.6Corrects an issue in updates after writes where value was within Deadband

eACM 2.4.2.1Edge MQTT Publisher 1.2.0.2Corrects an issue where certain configurations could lead to null DDATA messages being sent

eACM 2.4.2.1Edge MQTT Publisher 1.2.0.2Corrects metric aliasing to better fit Sparkplug B standard

eACM 2.4.2.0AUTOSOL App Manager 2.4.2.0Corrects an issue which could cause Edge ACM to fail to generate the license request file when no config data was present

eACM 2.4.2.0AUTOSOL App Manager 2.4.2.0Corrects issues with the install process on the IQ platform

eACM 2.4.2.0AUTOSOL App Manager 2.4.2.0Corrects issues with dependencies on latest cryptography module

eACM 2.4.2.0Edge ACM 2.0.0.5Adds write verification poll

eACM 2.4.2.0Edge ACM 2.0.0.5Corrects an issue where updates were not sent on return to normal quality

eACM 2.4.2.0Edge MQTT Publisher 1.2.0.0Adds the ability to publish arrays in three different formats

eACM 2.4.2.0Edge MQTT Publisher 1.2.0.0Adds the ability to send all NULL values in DBIRTH messages

eACM 2.4.2.0Edge MQTT Publisher 1.2.0.0Updates publishing to ensure backfill data is always published in chronological order

eACM 2.4.2.0Edge MQTT Publisher 1.2.0.0Corrects an issue with backfill files not being created if directory is within one step of the root folder

eACM 2.4.2.0Edge MQTT Publisher 1.2.0.0Corrects an with backfill files breaking if the tag name had a forward slash

eACM 2.4.2.0Edge MQTT Publisher 1.2.0.0Corrects an issue with backfill not working if “Serialized Publishing” was enabled

eACM 2.3.1.0AUTOSOL App Manager 2.3.1.0Tree search was added.






eACM 2.3.1.0AUTOSOL App Manager 2.3.1.0Collapse tree was added.

eACM 2.3.1.0AUTOSOL App Manager 2.3.1.0Corrects an issue with how the tree and item views scrolled and overlapped

eACM 2.3.1.0AUTOSOL App Manager 2.3.1.0Corrects issues that caused items to be orphaned after an import to a folder.

eACM 2.3.1.0Edge ACM 2.0.0.4‘Alias’ property on Tag objects changed to ‘Name'

eACM 2.3.1.0Edge ACM 2.0.0.4The Tag CSV files from previous versions will need to be manually updated so that the column header says ‘Name’ before importing into this latest version.

eACM 2.3.1.0Edge ACM 2.0.0.4Corrects an issue with Modbus RTU register set

eACM 2.3.1.0Edge ACM 2.0.0.4Corrects an issue with Custom Modbus register sets

eACM 2.3.1.0Edge ACM 2.0.0.4Corrects an issue with polling String tags from Modbus OMNI

eACM 2.3.1.0Edge MQTT Publisher 1.1.0.0Implemented Verbose logging

eACM 2.3.1.0Edge MQTT Publisher 1.1.0.0Adds the ability to include timestamp in current data metrics

eACM 2.3.1.0Edge MQTT Publisher 1.1.0.0Corrects Sparkplug B sequencing issue that could arise when multiple devices published rapidly

eACM 2.3.1.0Edge MQTT Publisher 1.1.0.0Corrects issue where backfill files were being created for tags where backfill was not enabled

eACM 2.3.1.0Edge MQTT Publisher 1.1.0.0Corrects an preventing backfill files from being created if there were forward slashes in the tag name

eACM 2.3.1.0Edge MQTT Publisher 1.1.0.0Corrects an issue that could cause Edge MQTT Publisher to crash if the initial values for tags was null data

eACM 2.3.1.0Edge MQTT Publisher 1.1.0.0Corrects an issue where null initial tag data was being published as zeros instead of null

eACM 2.3.1.0Edge MQTT Publisher 1.1.0.0Adds verification to make sure Keep Alive is never set below 5 seconds

eACM 2.3.1.0Edge MQTT Publisher 1.1.0.0Corrects an issue with Sparkplug B STATE message decoding

eACM 2.2.1.1Edge ACM 2.0.0.3Corrects an issue that prevented logs from rotating at 1mb

eACM 2.2.1.1Edge ACM 2.0.0.3Corrects an issue where the app would stop publishing when flooded with rebirth requests

eACM 2.2.1.0AUTOSOL App Manager 2.2.1.0HTTPS can now be enabled and disabled on the webserver. HTTPS is disabled by default.

eACM 2.2.1.0AUTOSOL App Manager 2.2.1.0Adds the ability to log in with a username and password. The default is admin/admin.

eACM 2.2.1.0AUTOSOL App Manager 2.2.1.0Corrects an issue with tag groups and how the file is loaded.

eACM 2.2.1.0AUTOSOL App Manager 2.2.1.0Changes the wording on the App Manager connection status for clarity.

eACM 2.1.0AUTOSOL App Manager 2.1.0AUTOSOL App Manager can now manage AUTOSOL Bridge

eACM 2.1.0AUTOSOL App Manager 2.1.0You can now delete log files from the Log Viewer page.

eACM 2.1.0AUTOSOL App Manager 2.1.0App Manager now supports configuration object commands

eACM 2.1.0Edge ACM 2.1.0Edge ACM and Edge MQTT Publisher have better start up validation in order to prevent false start ups.

eACM 2.1.0MultiplePing target (ipv4) has been implemented in Connection objects across different applications

eACM 2.0.3Edge MQTT PublisherFixed memory leak issue in Edge MQTT Publisher Sparkplug B Publisher

eACM 2.0.3Edge MQTT PublisherFixed issue in Edge MQTT Publisher where subscriptions were lost by broker after a broker restart

eACM 2.0.3Edge MQTT PublisherFixed issue in Edge MQTT Publisher where back fill to disk could corrupt a file if power loss occurs during write

eACM 2.0.0AUTOSOL App Manager 2.0.0In an effort to improve future development as well as bug fixes, our AUTOSOL App Manager and our Edge Managers were redesigned to use the same base code.

eACM 2.0.0AUTOSOL App Manager 2.0.0Communication between the Universal and Edge Managers is now exclusively through the MQTT protocol.

eACM 2.0.0AUTOSOL App Manager 2.0.0Edge Manager (formerly App Manager) ships with its own web configuration site which will be available for initial configuration or any other local changes.X
eACM 2.0.0AUTOSOL App Manager 2.0.0Both Managers utilize the same User Interface. The improved tree view allows you to quickly change and configure items across different nodes in your network. The UI is accessible through HTTP on any browser.

eACM 2.0.0AUTOSOL App Manager 2.0.0Multiple configuration tabs are now available. Like in other AUTOSOL products, we have now implemented tabs in our configuration interface. You will be able to quickly view and compare different items across your network of nodes.

eACM 2.0.0AUTOSOL App Manager 2.0.0The Import/Export functionality has been expanded to apply to all types of items. You can import/export a whole Node, a single App, or a single Object.X
eACM 2.0.0AUTOSOL App Manager 2.0.0System Information now displays further information about the state of the manager. You can download that information as a report file from the System Info page.

eACM 2.0.0AUTOSOL App Manager 2.0.0Log Viewer now has a way to download all log files from the system in a zipped archive format.

eACM 2.0.0Azure 1.0.0Azure application has been released with version 1.0.0

eACM 2.0.0Azure 1.0.0Azure publishes Edge ACM device item updates on a report-by-exception basis to Azure IoT Hub via Device-to-Cloud telemetry

eACM 2.0.0Azure 1.0.0Azure writes to Edge ACM device items when a write request is received via Azure IoT Hub Cloud-to-Device messages

eACM 2.0.0Edge ACM 2.0.0Edge ACM design has changed to publish protocol data to an Internal Tag server to which Edge MQTT Publisher and Azure publishing apps can connect.

eACM 2.0.0Edge MQTT Publisher 1.0.0New ability to publish as multiple nodes from single device

eACM 2.0.0Edge MQTT Publisher 1.0.0Support for MQTT TLS added

eACM 2.0.0Edge MQTT Publisher 1.0.0Support for MQTT Protocol Version 5 added

eACM 2.0.0Edge MQTT Publisher 1.0.0Added ability to set custom Client ID on broker connections

eACM 2.0.0Edge MQTT Publisher 1.0.0Advanced timing options added

eACM 2.0.0Edge MQTT Publisher 1.0.0Primary Host ID functionality added

eACM 2.0.0Edge MQTT Publisher 1.0.0Added ability to back fill data to disk upon connection loss or primary host disconnect

eACM 2.0.0Edge MQTT Publisher 1.0.0Added ability to split back fill messages with a set number of values per tag

eACM 2.0.0Edge MQTT Publisher 1.0.0Added ability to hard code a delay time between births

Out of Maintenance Releases

 Click here to expand...

Release

Category

Text

eACM 1.0.0AUTOSOL App Manager 1.0.0System information now shows the versions of the applications installed.
eACM 1.0.0AUTOSOL App Manager 1.0.0Data models now support multiple references to other data models.
eACM 1.0.0AUTOSOL App Manager 1.0.0Partial imports are now supported.
eACM 1.0.0AUTOSOL App Manager 1.0.0Preliminary backwards compatibility modifications were implemented.
eACM 1.0.0AUTOSOL App Manager 1.0.0The new import.log will show what items were modified.
eACM 1.0.0AUTOSOL App Manager 1.0.0If a data model changes, App Manager can import most of the configuration.
eACM 1.0.0AUTOSOL App Manager 1.0.0An uninstaller has been added.
eACM 1.0.0Edge ACM 1.1.0You can now download an empty CSV header file from a Tag Group in Edge ACM.
eACM 1.0.0Edge ACM 1.1.0Support for fully custom Modbus register sets has been added.
eACM 1.0.0Edge ACM 1.1.0Added a schedule object that can be assigned to tag groups. NOTE: Poll Interval has been moved from the Connection Settings object to this new schedule object.
eACM 1.0.0Edge ACM 1.1.0Devices now support multiple tag groups.
eACM 1.0.0Priority Forward 2.0.0Priority Forward has been updated to version 2.0.0
eACM 1.0.0Priority Forward 2.0.0Connections have been renamed to Channels and now support advance settings.
eACM 1.0.0Priority Forward 2.0.0The priority client can be delayed from forwarding until after a millisecond configured timeout.
eACM 1.0.0Priority Forward 2.0.0Connection retries and retry intervals from the Priority and Secondary down to the end device are now configurable.
eACM 1.0.0Priority Forward 2.0.0Priority Forward logs are much more descriptive and useful.


  • No labels

For assistance, please submit a ticket via our Support Portal, email autosol.support@autosoln.com or call 281.286.6017 to speak to a support team member.