See the Common Device Configuration guide for assistance configuring the General, Options, Details, and Logging tabs. See the Connection/Schedule page for assistance with the Connection tab.

Device Tab

See the Common Modbus Device Tab page.

OMNI Tab

Default = Disabled. Enable this to configure and allow using password login.

Password

Password for sign on.

Modicon Compatible

Default = Disabled. Enable this if device has Modicon compatible turned on.

Time Sync Tab

See the Common Time Sync Tab page.

Archive Collection Tab

Collection Priority

Low (Default). Queues up with other Low priority items
Medium. Interrupts Low priority items, and queues up with other Medium priority items
High. Interrupts Medium and Low priority items, and queues up with other High priority items

Archive Interval

Select the desired Interval relating to the Schedule object assigned on the Connection tab. Archive collections (Alarm, Events, Batch, Periodic, etc) will occur at a frequency based on the configuration of this interval.

Collect Alarms

Default = Not selected. Select to enable collection of alarm data.

Alarm Archive

Click to select or create an Archive Limits. See the Archive Limits section for more details.

Collect Events

Default = Not selected. Select to enable collection of measurement audit data.

Event Archive

Click to select or create an Archive Limits. See the Archive Limits section for more details.

Collect Archive

Default = Not selected. Select to enable collection of the selected archive number.

Archive 1-25

Select the archive to configure from the drop down.

Archive Type

Select the option that describes how the data in this archive is used.

Raw Data (Default): Use this to transfer archive records from the OMNI. No field identification is attempted
Daily data: Identifies known or mapped daily fields if needed for EFM output types
Batch data: Identifies known or mapped batch fields if needed for EFM output types
Prove data: Identifies known or mapped prove fields if needed for EFM output types
Hourly data: Identifies known or mapped hourly fields if needed for EFM output types

Archive GC

Select the archive (if any) that contains GC data to be merged with records from this archive.

No GC (Default)
Archive 1-25

Archive Object

Click to select or create an Archive Limits. See the Archive Limits section for more details.

Map Type

Select the option to use for interpreting data in archive records.

ACM Internal Map (Default)
User Defined Map
Both Maps

Map

Click to select or create the Modbus History Map Object assigned to this archive. See the Modbus History Map section for more details.

Include Unmapped Fields

Default = Not selected. Select to include unmapped archive fields in the output record.

Concatenate string registers with duplicate identifiers

Default = Not selected. Select to concatenate duplicate string registers into one field.

Text Report Interval

Select the desired Interval relating to the Schedule object assigned on the Connection tab. Text Report collections will occur at a frequency based on the configuration of this interval.

Collect Batch

Default = Not selected. Select to include Batch Report collection on schedule poll.

Batch Archive

Click to select or create an Archive Limits. See the Archive Limits section for more details.

Collect Daily

Default = Not selected. Select to include Daily Report collection on schedule poll.

Daily Archive

Click to select or create an Archive Limits. See the Archive Limits section for more details.

Collect Detailed Daily

Default = Not selected. Select to include Detailed Daily Report collection on schedule poll. (Only available for Gas meters)

Detailed Daily Archive

Click to select or create an Archive Limits. See the Archive Limits section for more details.

Collect Prove

Default = Not selected. Select to include Prove Report collection on schedule poll.

Prove Archive

Click to select or create an Archive Limits. See the Archive Limits section for more details.

Configuration Interval

Select the desired Interval relating to the Schedule object assigned on the Connection tab. Configuration will clear out at a frequency based on the configuration of this interval. This will cause the next data collection requiring this data to collect new configuration from the rtu.

Use Old Archive Method

Default = Not selected. Select to use the older, slower archive retrieval method which requires writing the desired archive record index before retrieving the record.

Publish Raw Data

Default = Not selected. Select to always publish raw archive records in addition to selected archive type.

Log Publish Data

Default = Selected. Select to log register and value information for data sent to publisher.

Scale Volume Totalizers

Default = Not selected. Select to scale gross and net volume totalizer values using the number of decimal places configured in the OMNI.

Scale Mass Totalizers

Default = Not selected. Select to scale mass totalizer values using the number of decimal places configured in the OMNI.

Note

The OMNI stores totalizer values (counts/pulses). Users can configure an “implied decimal” place of 1, 10, or 100. When ACM retrieves the history records it can store the counts/pluses as is (options to scale disabled), or divide the counts/pulses by the configured decimal place (options to scale enabled).

Include record index number

Default = Not selected.

Include OMNI revision number

Default = Not selected.

Include RTU clock date and time

Default = Not selected.

Prevent DP and Pulse value conflicts

Default = Not selected. Select to make ACM use the DP or Pulse value appropriately when publishing to outputs like CFX and PGAS. Both values will be in the output record, but the appropriate value for use will be identified based on the type of meter. This is only necessary if the OMNI archive is configured to contain both the DP and Pulse registers.

Skip report timestamp check

Default = Not selected. Some older versions of OMNI firmware don't include the registers that contain the timestamps of reports. This can cause an error during report collection. Check this option to make ACM skip the timestamp check.

Only combine Proves with matching timestamps

Default = Not selected. When prove records are split across multiple archives, ACM will retrieve records at the same index from the configured archives, and combine the records into one prove record. Check this option to only archive records combined when they have matching timestamps.

Meter Runs Tab

Meter 1-6

Click to select or create the Meter Object assigned for the meter run. See the Meter section for more details.

Station Meter 1 & 2

Click to select or create the Meter Object assigned for the station mater. See the Meter section for more details.

Custom Packets Tab

Publish Packets

Default = Not Selected. Select to configure packet archives.

Packet 1-5 Archive

Click to select or create an Archive Limits for each archive. See the Archive Limits section for more details.

Device Tab

OMNI Tab

Login

Password

Modicon Compatible

Time Sync Tab

Archive Collection Tab

Collection Priority

Archive Interval

Collect Alarms

Alarm Archive

Collect Events

Event Archive

Collect Archive

Archive 1-25

Archive Type

Archive GC

Archive Object

Map Type

Map

Include Unmapped Fields

Concatenate string registers with duplicate identifiers

Text Report Interval

Collect Batch

Batch Archive

Collect Daily

Daily Archive

Collect Detailed Daily

Detailed Daily Archive

Collect Prove

Prove Archive

Configuration Interval

Use Old Archive Method

Publish Raw Data

Log Publish Data

Scale Volume Totalizers

Scale Mass Totalizers

Include record index number

Include OMNI revision number

Include RTU clock date and time

Prevent DP and Pulse value conflicts

Skip report timestamp check

Only combine Proves with matching timestamps

Meter Runs Tab

Meter 1-6

Station Meter 1 & 2

Custom Packets Tab

Publish Packets

Packet 1-5 Archive

Browser not supported