Teledyne CA Configuration
See the Common Device Configuration guide for assistance configuring the General, Options, Details, and Logging tabs. See the Connection/Schedule page for assistance with the Connection tab.
Device Tab
Address
Default = 1. Address of the RTU.
Max Data Bytes
The maximum number of data bytes allowed by the device in the message. The protocol supports 250 characters as the maximum.
Conversion Type
Default = None. Select the desired conversion type to use when processing a response: None, BCD or Greycode.
Enable Enhanced Logging Mode
Default = Not selected. Selecting this will configure the polling engine to log additional traffic status information for outgoing and incoming messages to facilitate troubleshooting for difficult communication situations. Only use this feature for short term troubleshooting as it can increase log size considerably.
For assistance, please submit a ticket via our Support Portal, email autosol.support@autosoln.com or call 281.286.6017 to speak to a support team member.