Configuration
You now have all the files required to configure your client and server (broker) for TLS authentication with both server authentication and client authentication.
You will need to provide ca.pem to both your client and server.
You will need to provide server.key and server.pem to your server.
You will need to provide client.key and client.pem to each client. The client will also need to be provided with the password used to encrypt its client.key.
Client
In older versions of eACM, you must copy (scp) your ca.pem, client.key and client.pem to the host where eACM is installed and reference the path to it in your TLS Settings object (MQTT app) or the Broker 1/2 tab of your Node object (Edge Manager).
In newer versions of eACM, you can upload your ca.pem, client.key and client.pem using the TLS Settings object form or Node object form.
Assign ca.pem to the CA File property of the object.
Assign client.key to the Client Private Key property of the object.
Assign client.pem to the Client Certificate property of the object.
Assign the password used to encrypt client.key to Private Key Password.
Server (Broker)
The broker configuration will be different for each broker. Example for mosquitto:
per_listener_settings true listener 8883 allow_anonymous false require_certificate true certfile C:\Users\myuser\Documents\certs\server.pem keyfile C:\Users\myuser\Documents\certs\server.key cafile C:\Users\myuser\Documents\certs\ca.pem use_identity_as_username true acl_file C:\Users\myuser\Documents\mosquitto\acl_8883.txt
Where acl_8883.txt may contain by example:
user MyEACM topic read STATE/+ topic readwrite spBv1.0/# user SparkplugViewer topic read STATE/+ topic read spBv1.0/# user HMI topic readwrite STATE/+ topic readwrite spBv1.0/#
What to do when authentication fails
When the MQTT client (eACM, Edge Manager or Bridge) fail to connect to the broker the first thing to do is to enable logging on your MQTT broker. Then compare the broker logging in the context of logging from eACM.
The most commonly encountered error is that the connection (almost succeeded) and fails whenever the server authenticates to the client. The client will then drop the connection to the broker at the last minute. This is almost always a symptom of the broker’s certificate CN field not including the IP or hostname of the broker. A shortcut to resolving this scenario is unchecking the Verify Certificate box in eACM. The connection will still be encrypted in this case. However, since the client has not proven it is connected to what it expects to be the right broker … any username or password it provides can be sent to that (possibly) impersonating broker.
Search the log for OpenSSL errors in order to deduce the source of the failure.
If you are using mosquitto you may do so by editing mosquitto.conf. Example:
log_dest file C:\Users\myuser\Documents\mosquitto\mosquitto.log log_type error log_type warning log_type notice log_type information log_timestamp true log_timestamp_format %Y-%m-%dT%H:%M:%S