...
| Info |
|---|
| Information about ACM Security can be found: SEC |
| Table of Contents |
|---|
Releases In Active Maintenance
...
Release | Category | Type | Text | Affects Published Output | Addresses Security Vulnerability |
|---|---|---|---|---|---|
| ACM 9.1.1 | Bulk Manager | Issue | Corrects an issue after upgrading to 9.1.0 that prevented asiBulkMgr from starting until the database connection had been modified in ACM Monitor. | ||
| ACM 9.1.1 | Client Application | Issue | Prevents ACM Configuration from freezing when loading all properties for DNP3 FBx and BSAP devices. This could occur when selecting the "View All Properties" menu option in the "Type View" of the navigation tree. | ||
| ACM 9.1.1 | Client Application | Issue | Prevents the Dashboard grid from flickering when sorting a large number of records. | ||
| ACM 9.1.1 | Client Application | Issue | Removes the option to select an Alias Group object in the "Status" panel of port objects. | ||
| ACM 9.1.1 | Client Application | Issue | Masks the password in the "Provider String" fields on the Database and AUTOSOL EFM Database objects "Database" tabs. | ||
| ACM 9.1.1 | Client Application | Issue | Masks the "Password" field in the "Security" section of the Totalflow "Device" tab. | ||
| ACM 9.1.1 | Client Application | Issue | Improves the loading performance of the Dashboard. | ||
| ACM 9.1.1 | Client Application | Issue | Corrects the multi-line copy and paste capability for the "Comments" column when using multi-object edit tool. Now text with hard returns will be pasted into a single cell, and the entire cell contents, even if they include a hard return, will be copied. | ||
| ACM 9.1.1 | Configuration Database | Issue | Deprecated Alias Group properties will be added to the database cleanup script. | ||
| ACM 9.1.1 | Connections: TCPIP Connection | Issue | During a primary path test, ACM will no longer attempt to connect to the primary port if it was closed with a 'Close Port' command. | ||
| ACM 9.1.1 | GC Write Service | Issue | Adds more details for file parsing errors to aid in troubleshooting processing issues. | ||
| ACM 9.1.1 | General | Issue | Prevents loss of data when ACM cannot read the configuration from the database during startup. | ||
| ACM 9.1.1 | General | Issue | Corrects the missing log messages for 'Data sent to client' when the client is an OPC UA client. | ||
| ACM 9.1.1 | Installer | Issue | Corrects an issue that caused the 64-bit version of ACM to be installed in C:\Program Files(x86) instead of C:\Program Files. | ||
| ACM 9.1.1 | Installer | Issue | Corrects an issue that may cause the ACM installer to erroneously report that a previous version of ACM is already installed. | ||
| ACM 9.1.1 | Kinder Morgan Modbus | Issue | Corrects an issue related to archive sequence number resets. | ||
| ACM 9.1.1 | MQTT | Issue | Corrects an issue that caused asiData to crash when restarting asiItemServer. | ||
| ACM 9.1.1 | MQTT | Issue | Adds configurable logging detail modes for connections, device and item activity between ACM and MQTT broker publishing to aid in troubleshooting. | ||
| ACM 9.1.1 | OPC UA | Issue | Corrects the data type of the initial value update for archive 'Move' and 'Reset' items in the Totalflow protocol. | ||
| ACM 9.1.1 | OPC UA | Issue | Incorporates OPC Foundation stack version 1.4.371.96 which includes resolutions for security issues CVE-2023-27321 and CVE-2023-31048. | YES | |
| ACM 9.1.1 | Protocols: Base Protocol | Issue | Prevents a possible memory leak that could occur while processing history records. This leak only occurred when using a configurable archive object with fields of 'string' data types marked as 'Not Used' for their attribute value with the following protocols: Enron Modbus, Kinder Morgan Modbus, ETNG Modbus, Prosoft Modbus, Benchmark, and BSAP. | ||
| ACM 9.1.1 | Protocols: BSAP Protocol | Issue | Prevents a memory leak that may occur when using Accol or Signal files for item names. | ||
| ACM 9.1.1 | Protocols: BSAP Protocol | Issue | Corrects an issue that caused the protocol to retrieve all history each time the "Retrieve History" command was executed. *Effect On Published Output: ACM will no longer republish all history records each time history is retrieved. | X | |
| ACM 9.1.1 | Protocols: FlowX Protocol | Issue | Prevents repeat error log messages for duplicate tag names when configuring a FlowX History Map object. | ||
| ACM 9.1.1 | Protocols: GE SRTP Protocol | Issue | Prevents a memory leak that occurs when the GESRTP Protocol validates received responses. | ||
| ACM 9.1.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that created duplicate EFM meter configuration fields. *Effect On Published Output: ACM will no longer publish duplicate EFM meter configuration fields. | X | |
| ACM 9.1.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects the temperature and pressure high/low alarm setpoint values published to the meter configuration record. *Effect On Published Output: ACM will publish the correct temperature and pressure high/low alarm setpoint values. | X | |
| ACM 9.1.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that prevented the driver from converting values correctly when the "Publish volume and related items data and units in MCF" checkbox is checked. | ||
| ACM 9.1.1 | Protocols: Modbus Protocol | Issue | Prevents a memory leak that could occur when retrieving history in the Modbus Enron and Modbus SCADAPack protocols. | ||
| ACM 9.1.1 | Protocols: Omni Modbus Protocol | Issue | Corrects a polling error that occurred when using the "Modicon Compatible" option on the Modbus OMNI 7000 "OMNI" tab. | ||
| ACM 9.1.1 | Protocols: ROC Protocol | Issue | Corrects an issue where the K-Factor override to use Point Type 7 did not function with the new Firmware 2.0+. *Effect On Published Output: ACM will publish the correct K-Factor for devices with the new Firmware 2.0+. | X | |
| ACM 9.1.1 | Protocols: SCADAPack Protocol | Issue | Corrects the Data Resolution value published to CFX files. *Effect On Published Output: The correct Data Resolution value will be published to CFX files. | X | |
| ACM 9.1.1 | Protocols: SCADAPack Protocol | Issue | Corrects gas Relative Density and liquid Density output values in history records. *Effect On Published Output: Publishes Relative Density for gas and Density for liquid output in history records. | X | |
| ACM 9.1.1 | Protocols: SCADAPack Protocol | Issue | Prevents ACM from publishing a partial meter configuration record if the meter configuration data cannot be fully retrieved from the device. *Effect On Published Output: ACM will not publish a partial meter configuration record if that meter configuration data cannot be fully retrieved from the device. | X | |
| ACM 9.1.1 | Protocols: SCADAPack Protocol | Issue | Adds initial support for new Scadapack 470i and 474i controllers. | ||
| ACM 9.1.1 | Protocols: Totalflow Protocol | Issue | Uses the correct value for the meter serial number when the Archive Collection tab is configured to use the "ACM meter description" as the source for the meter serial number. *Effect On Published Output: ACM will publish the correct value for Meter Serial number when using the "ACM Meter Description" as the source. | X | |
| ACM 9.1.1 | Protocols: Totalflow Protocol | Issue | Turbine meters will now have empty/blank values in the meter configuration record for Pipe Material, Tap Type, and Tap Location. *Effect On Published Output: The output for Turbine meters will now have empty/blank values in the meter configuration record for Pipe Material, Tap Type, and Tap Location. | X | |
| ACM 9.1.1 | Protocols: Totalflow Protocol | Issue | Corrects the AGA calculation method reported for gas coriolis Totalflow meters. *Effect On Published Output: The correct AGA calculation method will be published for gas coriolis Totalflow meters. | X | |
| ACM 9.1.1 | Protocols: Totalflow Protocol | Issue | Corrects a memory leak that occurs during history collection if at least one debounce meter and input is assigned. | ||
| ACM 9.1.1 | Publishing | Issue | Prevents a memory leak in the publisher process if a referenced token string cannot be identified. | ||
| ACM 9.1.1 | Publishing | Issue | Corrects a memory leak when using the right-click configuration tree menu option to re-publish history for a device. | ||
| ACM 9.1.1 | Server Monitor | Issue | Adds a new "About" tab to the Server Monitor to simplify reporting information to AUTOSOL Customer support. The "About" tab displays the Server Version, Server Start Time, Windows Version and License Information. It also has buttons to open the Log File directory, the Dump File directory and the Event Viewer filtered to ACM events. A fourth button creates a "Support Package" zip file that can be attached to a support ticket. The zip file contents include log files, dump files, events, a few reports and server information. | ||
| ACM 9.1.1 | Server Monitor | Issue | Provides the ability to use an unsecure connection when testing the MQTT and Bridge Broker Connections. Note: This setting is not suggested for use in a production environment. | ||
| ACM 9.1.1 | General | Issue | Prevents a memory leak that could occur when the asiData service is stopped. | ||
| ACM 9.1.1 | General | Issue | Prevents a memory leak that could occur when configuring View objects. | ||
| ACM 9.1.1 | Server Monitor | Issue | Updates the "View Client/Server Info" form in ACM Configuration and the "Server information" form in ACM Monitor to include the third digit in the version. This represents the maintenance release number of the ACM server, e.g. 9.1.1. | ||
| ACM 9.1.1 | Server Monitor | Issue | Adds the license information to the "View Client/Server Info" form in ACM Configuration. | ||
| ACM 9.1.1 | Siemens S7 Protocol | Issue | Corrects an issue with non bit offset writes that was causing the device to return an error. | ||
| ACM 9.1.1 | Siemens S7 Protocol | Issue | Corrects an issue that prevented some error messages from being logged when the Enhanced logging option was not selected. | ||
| ACM 9.1 | Client Application | Feature | Adds a new "right-click" menu option labeled "Navigate To Object" to an object tab that will locate the opened object in the configuration tree. | ||
| ACM 9.1 | Client Application | Feature | Adds a row number to the Dashboard grid. | ||
| ACM 9.1 | Connections: UDP BSAP Connection | Feature | Modifies ACM to ignore the UDP error code 'WSAECONNRESET' in UDP BSAP. | ||
| ACM 9.1 | General | Feature | Adds a new Sync Read Timeout property to the $Server object Server tab to establish the lengh of time (in milliseconds) the server should wait for a Sync Read to time out. | ||
| ACM 9.1 | Mobile Portal | Feature | AUTOSOL has released the Mobile Portal. | ||
| ACM 9.1 | OPC UA | Feature | Adds a new element to the configuration file named "TraceMasks" to control the message logging output from the OPC UA Stack. More information regarding the use of the new element can be found in Appendix B of the OPC UA User Guide. | ||
| ACM 9.1 | OPC UA | Feature | Adds support for writing to array type items in ACM. | ||
| ACM 9.1 | OPC UA | Feature | Adds configurable server properties MaxNodesPerWrite and MaxMonitoredItemsPerCall. | ||
| ACM 9.1 | OPC UA | Feature | Integrates the OPC UA .NET Standard Stack Version 1.4.370.12 from OPC Foundation which fixes the following cybersecurity vulnerability: CVE-2022-33916. | YES | |
| ACM 9.1 | Protocols: ControlLogix Protocol | Feature | Updates the driver so it can communicate with a device running ControlLogix firmware Rev34. | ||
| ACM 9.1 | Protocols: DNP3 Protocol | Feature | Adds a modifier &SECONDS to the DNP3 FBx protocol to return seconds elapsed since January 1st, 2000 at 12:00:00 AM. | ||
| ACM 9.1 | Protocols: DNP3 Protocol | Feature | Adds a new EFM Option, "Publish all meter config fields" to the Archive Collection tab. When selected, ACM will publish all fields whether or not they have values. *Effect On Published Output: If this option is checked, all meter config fields will be published. When unchecked, only meter config fields with data will be published. | X | |
| ACM 9.1 | Protocols: DNP3 Protocol | Feature | Adds the fields KFactor13 - KFactor20 and Frequency13 - Frequency20 to the publisher and the Meter Configuration object. | ||
| ACM 9.1 | Protocols: DNP3 Protocol | Feature | Adds the field VersionNumber to the Meter Configuration object. | ||
| ACM 9.1 | Protocols: DNP3 Protocol | Feature | Publishes the fields KFactor1 - KFactor20 and Frequency1 - Frequency20 from the meter config file read from the DNP3 FBx device. *Effect On Published Output: These fields will be added to the published meter configuration record if FBx meter config files are used and contain these fields. | X | |
| ACM 9.1 | Protocols: E-Lite Modbus Protocol | Feature | Adds support for the Dynamic Flow Computer's E-Lite Protocol. This includes the ability to perform a TimeSync command, read and write to registers, and retrieve history, alarm, events and meter configuration information. | ||
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Feature | Adds the ability to include "zero value" bytes to the device wake-up message. The new field is labeled "Message Nulls" and is found on the Device tab and can be used to stabilize the connection before the 04 byte is sent. | ||
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Feature | Adds a new feature to allow a time sync to be performed on RTU call-in. | ||
| ACM 9.1 | Protocols: Kimray Protocol | Feature | Adds additional items for the AutoTune/AutoRecovery command for read and write. | ||
| ACM 9.1 | Protocols: ROC Protocol | Feature | Adds more details to the logging information when the "Log EFM Upload Progress" option on the "Device" tab is checked. | ||
| ACM 9.1 | Protocols: ROC Protocol | Feature | Adds support for Emerson's new enhanced security released in the following firmware versions: FB107 version 2.0, ROC 800L version 1.70, ROC 800 version 3.90. | ||
| ACM 9.1 | Protocols: ROC Protocol | Feature | Adds the Software Version to the meter configuration collection. *Effect On Published Output: The Software Version will now be populated in CFX output. | X | |
| ACM 9.1 | Protocols: ROC Protocol | Feature | Adds a new option to the "Device" tab labeled "Device is an FB107 with firmware version 2.0 or higher" that must be checked to collect history on FB107 devices with Firmware 2.0+. | ||
| ACM 9.1 | Protocols: ROC Protocol | Feature | Adds an option to the "Device" tab labeled "Collect history on a ROC with no configured meters (non-RocPlus)" to collect history from devices with no meters assigned. This feature is not intended for use with the ROC800 series. *Effect On Published Output: When the new option is selected, history will be published for devices with no meters configured. | X | |
| ACM 9.1 | Protocols: ROC Protocol | Feature | Adds support for Vinson Haul Logs, Vinson Cyclic Logs and Vinson Gas Lift Logs in 107, 80X and 800L series ROC devices. | ||
| ACM 9.1 | Protocols: ROC Protocol | Feature | Adds an option "Store events only with associated meters" to only publish calibration events with their associated meters. *Effect On Published Output: If the option is turned on, calibration events in ROC800 will only be published to the associated meters. | X | |
| ACM 9.1 | Protocols: ROC Protocol | Feature | Adds the ability to configure, by meter, which TLPs are written to on GC Write activities. | ||
| ACM 9.1 | Protocols: SCADAPack Protocol | Feature | Adds an option to the "Archive Collection" tab labeled "Publish Density to Observed Density with Liquid Meters". *Effect On Published Output: If the new option is checked, the Density value will be published to Observed Density for Liquid Meters. | X | |
| ACM 9.1 | Protocols: SCADAPack Protocol | Feature | Upgrades the SCADAPack driver to support 20 meters. | ||
| ACM 9.1 | Protocols: Totalflow Protocol | Feature | Adds "Attached to Stream", "Stream Id" and "Fixed Analysis on Error" as Meter Characteristics that can be published. The fields for these characteristics can be set on the Archive Collection tab. *Effect On Published Output: If configured, "Attached to Stream", "Stream Id" and "Fixed Analysis on Error" will be included in the published output. | X | |
| ACM 9.1 | Protocols: Weatherford Protocol | Feature | Updates the driver so that an OPC Sync Read of a card buffer array item will cause an immediate upload of that card buffer. | ||
| ACM 9.1 | Reports | Feature | Adds the ability to send scheduled reports to multiple individual emails without the need for a group email account. Email addresses must be separated by a comma. | ||
| ACM 9.1 | Security | Feature | Adds the ability to configure, in seconds, the inactivity timeout period. The new option, "Inactivity Timeout" is on the "Security Tab" and only applies when "Enable ROC Login" is checked. | ||
| ACM 9.1 | Server Monitor | Feature | Adds a new column in ACM Monitor Status view showing the Startup Type (i.e. Manual, Automatic or Disabled) for each process. | ||
| ACM 9.1 | Server Monitor | Feature | Provides the ability to change the Startup Type for all ACM processes within the ACM Monitor Status View tab. | ||
| ACM 9.1 | Alias Groups/Items | Issue | Corrects ACM to use only the $Server alias group if one is assigned. If an alias group is not assigned to the $Server object, ACM will use the device specific alias groups. | ||
| ACM 9.1 | API | Issue | Modifies the API to enforce validation of maximum/minimum values. | ||
| ACM 9.1 | API | Issue | Corrects an issue connecting to ACM when the API is loaded by an unmanaged process. | ||
| ACM 9.1 | asiBridge | Issue | Corrects the Quality of Service used by asiBRIDGE when it publishes MQTT messages. | ||
| ACM 9.1 | Client Application | Issue | Modifies the "Copy" functionality so that when copying a device, the meter references will not be copied. This prevents multiple devices polling data for the same meters. | ||
| ACM 9.1 | Client Application | Issue | Corrects the tool tip message for the Details tab User01 property. | ||
| ACM 9.1 | Client Application | Issue | Corrects an issue that caused the Configuration Manager to disconnect from asiData when searching for certain special characters (e.g parantheses). | ||
| ACM 9.1 | Client Application | Issue | Corrects an issue in the Scheduled Report form that caused fields using tokens to be reset. | ||
| ACM 9.1 | Client Application | Issue | Corrects an issue that prevented the object tree from reloading when selecting multiple objects via the search tool. | ||
| ACM 9.1 | Client Application | Issue | Adds the $Server and $Perf objects to the object tree in "Type View" and "Category View". | ||
| ACM 9.1 | Configuration Database | Issue | Corrects casing in asi_spInvokeArchiveSnapshot and asi_spGetPublisherFilterObjects to prevent errors on SQL Servers with extremely strict case defaults. | ||
| ACM 9.1 | Configuration Database | Issue | Increases the size of variables in asi_spGetPublisherFilteredObjects to handle very large filters. | ||
| ACM 9.1 | Configuration Database | Issue | Corrects an issue in the stored procedure asi_spInvokeArchiveSnapshots that could cause the Archive Management grid to display an incorrect Contract Hour for various protocols. | ||
| ACM 9.1 | Configuration Database | Issue | The script to update the database to version 42 will rebuild the Referenced Objects list which is used by the Orphaned Objects report. A manual update script is also available if this needs to occur in a database earlier than version 42. | ||
| ACM 9.1 | GC Write Service | Issue | Corrects the use of the tab delimiter and adds validation for delimiters in the GC Write File Service. | ||
| ACM 9.1 | General | Issue | Corrects an issue that caused ACM to wait for an OPC Sync Read request to complete when the target device object had been disabled. | ||
| ACM 9.1 | General | Issue | Changes the default DCOM authentication level from 'Connect' to 'Packet Integrity'. An override is available and instructions are found in the ACM and Windows DCOM Hardening section of the user guide. | YES | |
| ACM 9.1 | General | Issue | Corrects an issue that could cause an invalid timestamp in an OPC data change update. | ||
| ACM 9.1 | Importer/Exporter | Issue | Excludes missing Alias Group references from exported configuration data and ignores missing Alias Group references during configuration import. | ||
| ACM 9.1 | Importer/Exporter | Issue | Modifies the import process so it will update all references after an import. | ||
| ACM 9.1 | Installer | Issue | Modifies the ACM Crash Dump Configuration so that it will change when the ACM Data Directory is changed. | ||
| ACM 9.1 | Kinder Morgan Modbus | Issue | Corrects an issue related to archive sequence number resets in Kinder Morgan Modbus. | ||
| ACM 9.1 | OPC Items | Issue | Corrects Communication Statistics counter values. | ||
| ACM 9.1 | OPC Items | Issue | Corrects an error that cleared the item's last value when quality was "Last Known Value". | ||
| ACM 9.1 | OPC UA | Issue | Adds an option that allows the OPC UA server to connect to and disconnect from asiData when a client app connects and disconnects. This option is on the Properties tab of the OPC UA Configuration in ACM Monitor and is labeled "Only Connect To asiData When There Are Active Client Sessions". | ||
| ACM 9.1 | OPC UA | Issue | Adds functionality to allow the OPC UA server to start asiData when a client app connects. | ||
| ACM 9.1 | OPC UA | Issue | Corrects an issue that rejected items with square brackets around the device object name. | ||
| ACM 9.1 | OPC UA | Issue | Corrects an issue that caused multiple address space nodes to be created for the same item if a client did not include the namespace index in the item name. | ||
| ACM 9.1 | OPC UA | Issue | Corrects an error that resulted in an "out of bounds" error message when a client reinitialized a monitored item list. Corrects an issue that prevented monitored items from updating for nodes of data type 'signed byte'. Corrects an error that could return a "Service Fault - BadNotSupported" error message when creating a second monitored item for a node with data type 'signed byte'. | ||
| ACM 9.1 | OPC UA | Issue | Corrects an issue that prevented monitored items from being created in the Server address namespace. | ||
| ACM 9.1 | OPC UA | Issue | Corrects issue that could cause items to not be added to ACM but be active in the client application when the 'Only connect to asiData when there are active client sessions' property is enabled. | ||
| ACM 9.1 | Protocols: Base Protocol | Issue | Removes a duplicate warning message in log files about Item Data and Item Update that appeared when a demand timed out. | ||
| ACM 9.1 | Protocols: Base Protocol | Issue | Adds validation to the device "Connect String" property to disallow non-numeric characters in the IP Port number. | ||
| ACM 9.1 | Protocols: Base Protocol | Issue | Corrects an issue that prevented the Archive Limits "Limit First Collection" settings from being applied when assigning an Archive Limit object after having collected history and reset the pointer. | ||
| ACM 9.1 | Protocols: Benchmark Protocol | Issue | Corrects an issue that incorrectly processed a sub-command 11 when a field item data index was present in the item. | ||
| ACM 9.1 | Protocols: DNP3 Protocol | Issue | Adds support for Vinson Transactional Logs. | ||
| ACM 9.1 | Protocols: DNP3 Protocol | Issue | Corrects an issue that prevented the "Use meter config from device" option from being used during publishing. *Effect On Published Output: The correct meter configuration will be published based on the "Use meter config from device" checkbox. | X | |
| ACM 9.1 | Protocols: DNP3 Protocol | Issue | Corrects an issue that could prevent meter configuration file items from being read after re-checking the "Use meter config from device" option. This could occur when going from using the meter config from the device, to using the advanced meter config, and back again while the meter configuration file from the first setting was still valid. | ||
| ACM 9.1 | Protocols: DNP3 Protocol | Issue | ACM will process records that exist in a history record file, even when the sequence number and record count are not the same as those used to open the file. The sequence and record count mismatch can occur when the device detects and removes corrupted records from the file. Corrects an issue with using the value of a DNP3 binary item as an enumeration for meter configuration record values. *Effect On Published Output: Corrects publishing incorrect information to meter configuration records, and not retrieving available history records. | X | |
| ACM 9.1 | Protocols: FlowX Protocol | Issue | Corrects the history map validation to treat records with the same EFMID, MeterID and Period as duplicates. | ||
| ACM 9.1 | Protocols: GE SRTP Protocol | Issue | Prevents a memory leak in the GE SRTP protocol. | ||
| ACM 9.1 | Protocols: GE SRTP Protocol | Issue | Modifies the GE SRTP driver so a "No meter assigned for device" message will not appear when polling a device for which you are not collecting history. | ||
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that prevented audit trail items set to register address 255 from being published when the field was configured in a configurable archive as a 'Value' field. Effect On Published Output: Audit trail items set to address 255 will now be published if configured as a 'Value' field in the configurable archive object record set. | X | |
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects the AlarmType register value for all available Mercury registers to display all digits. | ||
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | Removes the extraneous 'Field5' field from the Alarm Record. *Effect On Published Output: Field5 will no longer be included in the published output. | X | |
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | Adds the alarm description in the alarm record output for non EC350 devices. *Effect On Published Output: Alarm descriptions will be published for non-EFM alarms. | X | |
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | Modifies the driver so the demand item will be updated during a cry out after triggering a continuous scan. | ||
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | Correctly assign units for items 910 and 911 in Audit Trail record when used as meter1. *Effect On Published Output: The correct unit will be published for 910 and 911 if the Audit Trail record is used as meter 1. | X | |
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that could prevent a meter's configuration from being uploaded if the sign-on sequence failed during a history upload and a retry is attempted by ACM. | ||
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that could cause the polling sequence to an RTU to get out of sync with the RTU resulting in an Invalid Command Error response during sign-on sequence. | ||
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | A Time Sync operation will now cause the Call-in Schedule to be set on the RTU when the protocol option "Set call-in schedule after regular polls" is enabled. | ||
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that caused the RTU call-in to not be acknowledged when no device protocol call-in options were enabled. | ||
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that could cause the next Call-in Schedule to not be set on the RTU when certain combinations of device protocol call-in options were enabled. | ||
| ACM 9.1 | Protocols: Honeywell - Mercury Protocol | Issue | Removes the "Change Access" capability for Honeywell Mercury EC350 & ERX350 as it is unsupported by these devices. | ||
| ACM 9.1 | Protocols: Micro MP3 Protocol | Issue | Corrects an issue that prevented the "Contract Hour" from being polled correctly which resulted in the value always being 0 on the Archive Management tab. *Effect On Published Output: Contract hour is now polled correctly and published for Micro MP3 devices. | X | |
| ACM 9.1 | Protocols: Modbus Protocol | Issue | Corrects an error that occurred when writing to array item using common Modbus item modifier 'IS'. | ||
| ACM 9.1 | Protocols: Omni Modbus Protocol | Issue | Prevents a Viscosity event in Omni 7000 devices from returning an abnormal code. | ||
| ACM 9.1 | Protocols: Omni Modbus Protocol | Issue | Adds the Calculation Method for the Omni 7000 liquid meter to the published output. *Effect On Published Output: The Calculation Method will now be published for Omni 7000 liquid meters. | X | |
| ACM 9.1 | Protocols: Omni Modbus Protocol | Issue | Corrects an issue that could cause an exception while processing an Omni 3000/7000 alarm record. | ||
| ACM 9.1 | Protocols: Possibly multiple protocols | Issue | Adds all Batch Record field identifiers and Liquid Product field identifiers to the selection list in the Archive Field Configuration Record Collection form. | ||
| ACM 9.1 | Protocols: ROC Protocol | Issue | Adds DATABASE.TOTAL_YD back to the OPC browsing list. | ||
| ACM 9.1 | Protocols: ROC Protocol | Issue | Corrects an issue that caused the GCWrite to write to incorrect TLPs if the GCWrite was executed before ROC meter configuration was read. | ||
| ACM 9.1 | Protocols: ROC Protocol | Issue | Corrects an issue that occasionally prevented the driver from determining the appropriate series when the "Do not switch ROC automatically series" was unchecked. | ||
| ACM 9.1 | Protocols: ROC Protocol | Issue | Corrects an issue that left an invalid item in the poll message after an "Invalid TLP" error code. | ||
| ACM 9.1 | Protocols: ROC Protocol | Issue | Corrects an issue where ROC FB103's were being polled as 503's resulting in missing values and no extended records. *Effect On Published Output: Corrects an issue where ROC FB103's were being polled as 503's resulting in missing values and no extended records. | X | |
| ACM 9.1 | Protocols: ROC Protocol | Issue | Prevents the option group from scrolling when clicking on an option while the form is not maximized. | ||
| ACM 9.1 | Protocols: ROC Protocol | Issue | Adds a field to the "Device" tab labeled "Schedule Reinitialization" to schedule the Reinitialize command. | ||
| ACM 9.1 | Protocols: ROC Protocol | Issue | Updates the Internal Archive Map Details pop-up to list EFM Fields according to meter type. The button to view this list is found on the "Archive Collection" tab. | ||
| ACM 9.1 | Protocols: SCADAPack Protocol | Issue | Corrects an issue that prevented the Scadapack driver from updating the status of a GC Write request if the request failed due to a Comm error. | ||
| ACM 9.1 | Protocols: SCADAPack Protocol | Issue | Prevents a partial meter record from being published if it is missing a Contract Hour. *Effect On Published Output: Partial meter config records that are missing the Contract Hour will not be published. | X | |
| ACM 9.1 | Protocols: Siemens Protocol | Issue | Corrects an issue with Byte Bit offsets that caused returned and written values to be off by one index. | ||
| ACM 9.1 | Protocols: Totalflow Protocol | Issue | Corrects an issue where a time sync and history request will fail due to having the same priority schedule. | ||
| ACM 9.1 | Protocols: Totalflow Protocol | Issue | Modifies the driver to use the configuration value read from the device for the "Has Default Temperature" field instead of a fixed value. *Effect On Published Output: The meter configuration field "Has Default Value" will display the meter's configured value. | X | |
| ACM 9.1 | Protocols: Totalflow Protocol | Issue | Corrects the driver so it will not collect duplicate Alarm Records during log period collection. *Effect On Published Output: Duplicate alarm records will not be published. | X | |
| ACM 9.1 | Protocols: Totalflow Protocol | Issue | Adds 'Double' data type support for Totaflow register read and write. | ||
| ACM 9.1 | Protocols: Weatherford Protocol | Issue | Corrects an issue that could cause ACM to stop running if the driver received an unexpected response packet to an FC16EX card buffer upload request. | ||
| ACM 9.1 | Protocols: Weatherford Protocol | Issue | Corrects an issue that could cause the event directory upload to never cease running if the event buffer on the controller was completely full. | ||
| ACM 9.1 | Publishing | Issue | Increases the size of the variables in asi_spgetPublisherFilteredObjects to varchar(max) to process very large filters. Note: After this fix, there is still a SQL Server limitation to varchar(max). If this error is still seen after DB Version 42, the filter will need to be modified. | ||
| ACM 9.1 | Publishing | Issue | Adds logging to the Database output type to show if a transaction was committed or rolled back to show the transaction completed. | ||
| ACM 9.1 | Publishing | Issue | Adds the field name and unit of measure to the message that is logged when the publisher cannot validate an event. | ||
| ACM 9.1 | Publishing | Issue | Corrects the error that resulted in an "Implicit conversion from data type datetime to real is not allowed." message when publishing a sample date to the FLOWCAL Transaction Queue. *Effect On Published Output: The sample date value from a DNP3 FBx device can now be published. | X | |
| ACM 9.1 | Publishing | Issue | Corrects the conversion for the Meter Access Date, Cold Start Date, Warm Start Date and Sample Date which are datetime fields but stored as a 'real' value in FLOWCAL. *Effect On Published Output: The Meter Access Date, Cold Start Date, Warm Start Date and Sample Date fields may now have data where previously they were incorrect null or 0. | X | |
| ACM 9.1 | Publishing | Issue | Prevents a string value from being published as the Contract Hour if an alphabetic character is entered for Contract Hour in the Advanced Meter Config. *Effect On Published Output: The FLOWCAL Transaction Queue will publish a number entered in the Contract Hour of the Advanced Meter Config, and will publish nothing if an alphabetic character is entered. | X | |
| ACM 9.1 | Publishing | Issue | Adds a fixed/live temperature indicator as TEMP_SOURCE and a fixed/live pressure indicator as SP_SOURCE to the meter characteristics for the PGAS XML publisher. *Effect On Published Output: The PGAS XML output will include fixed/live temperature and fixed/live pressure flags in the meter characteristics element if the protocol driver provides them. | X | |
| ACM 9.1 | Publishing | Issue | Includes the values of the User01, User02, and User03 fields from the Details tab, as well as the External GC Reference and External Meter Reference values in the published output. *Effect On Published Output: The User01, User02, User03, External GC Reference and External Meter Reference properties will now have values in the published output. | X | |
| ACM 9.1 | Publishing | Issue | The User01, User02, User03, External GC Reference and External Meter Reference properties will now have values in the published output. | ||
| ACM 9.1 | Reports | Issue | Prevents extraneous logs from being written when saving edits to scheduled reports. | ||
| ACM 9.1 | Reports | Issue | Corrects an issue in the Scheduled Reports that caused the $$CurrentDay$$ or $$CurrentHour$$ tokens to be incorrectly calculated in Throughput reports. | ||
| ACM 9.1 | Reports | Issue | Corrects an issue in the Scheduled Reports form that prevented the Save button from being enabled after editing the connection. | ||
| ACM 9.1 | Reports | Issue | Modifies the "Configuration Changes for a Device" report to filter to only Device type objects. | ||
| ACM 9.1 | Reports | Issue | Adds a new report titled "Configuration Changes for an Object" to search for configuration changes for any object type. | ||
| ACM 9.1 | Reports | Issue | Adds support for all of the following report formats to both manually run reports and scheduled reports: CSV, HTML, PDF, XLS, XLSX, & TEXT. | ||
| ACM 9.1 | Reports | Issue | Corrects the Scheduled Report form for the Missing Daily Archive Records to show the saved start and end date parameters when editing the form. | ||
| ACM 9.1 | Server Monitor | Issue | Adds the newest Microsoft OLE DB Driver 19 to the available database providers in ACM Monitor. This provides additional encryption options for the connection. More information can be found in the User Guide. | ||
| ACM 9.1 | Server Monitor | Issue | Adds a button to view the connection string. | ||
| ACM 9.1 | Server Monitor | Issue | Modifies the History Deletion value displayed in the Task Summary field when creating a new ACM database to show HH:MM. | ||
| ACM 9.1 | Server Monitor | Issue | Corrects the Write Timeout property of "Gas Analysis Writes Retry" to accept values in the range of 30 to 600 seconds. | ||
| ACM 9.1 | Server Monitor | Issue | Modifies the password requirements for the database user in ACM Monitor to prevent semi-colons. | ||
ACM 9.0.1 | ACM Server | Issue | Corrects an issue that prevented encrypted channel communication between an ACM client and server when the client and server components are on different computers. | ||
ACM 9.0.1 | Bulk Manager | Issue | No longer moves Import files to the Import Failed folder after a SQL Timeout. Instead they will remain in the Import folder. | ||
ACM 9.0.1 | Client Application | Issue | Corrects an issue in the "Password" and "Register Block Read Path" textboxes that did not allow user to enter a value properly. | ||
ACM 9.0.1 | Client Application | Issue | Removes the "Retrieve History", "Delete History for Device" and "Republish Device Records" commands from the right-click menu of Real-Time Only devices. | ||
ACM 9.0.1 | Client Application | Issue | Corrects an issue when creating a new Port Object that prevented the Port Type from being changed after canceling out of the folder location screen. | ||
ACM 9.0.1 | Client Application | Issue | Prevents the Edit Multiple Objects grid from re-sorting the data while a user is typing a value into a cell. | ||
ACM 9.0.1 | Client Application | Issue | Corrects an issue that caused the Logger and Queue tabs to go blank when a large number of object tabs were open in multiple ACM Clients. | ||
ACM 9.0.1 | Configuration Database | Issue | Corrects an issue in SQLUpdate_39.sql that prevented the ACM database from upgrading to DBVersion 39 and above where the default collation on the SQL Server is SQL_Latin1_General_CP850_BIN. | ||
ACM 9.0.1 | Configuration Database | Issue | Increases the size of the LastUpdateUser column in tblProperties and tblObjects, and the size of CfgUser in tblChanges, to nvarchar(100). Note: If the tables are being replicated, this will not run automatically and instead can be run via the Manual Script feature in ACM Monitor. | ||
ACM 9.0.1 | General | Issue | Corrects a memory leak that occurs when logging "data sent to client" on items in the OPC UA interface. | ||
ACM 9.0.1 | OPC UA | Issue | Integrates the OPC UA .NET Standard Stack Version 1.4.369.30 from OPC Foundation which fixes the following cybersecurity vulnerabilities: CVE-2022-29862, CVE-2022-29863, CVE-2022-29864, CVE-2022-29865, and CVE-2022-29866. | YES | |
ACM 9.0.1 | Protocols: Base Protocol | Issue | Correctly updates PctBadTries and PctGoodTries if the connection fails before the message can be sent. | ||
ACM 9.0.1 | Protocols: Base Protocol | Issue | Correctly updates the port PollAttempts counter when an external interruption occurrs. | ||
ACM 9.0.1 | Protocols: Base Protocol | Issue | Prevents queuing an additional demand after Demand is poked to trigger a continuous scan during cry out. | ||
ACM 9.0.1 | Protocols: Base Protocol | Issue | Corrects an issue that prevented the PctGoodTries and PctBadTries statistic items from being correctly updated when a connection was dropped before a message could be sent. | ||
ACM 9.0.1 | Protocols: BSAP Protocol | Issue | Corrects an issue that caused the driver to ignore the previous position and retrieve all history when the "Disable duplicate record deletion" option was selected. | ||
ACM 9.0.1 | Protocols: BSAP Protocol | Issue | Prevents a crash from occurring when the Field Configuration has not been assigned and the device could not be reached. | ||
ACM 9.0.1 | Protocols: DNP3 Protocol | Issue | Adds support for new objects, parameters, measurements, units and error codes in Emerson FBx firmware release version 2.9. | X | |
ACM 9.0.1 | Protocols: DNP3 Protocol | Issue | Handles alarm and event records that occur when the device is configured for BSAP Combined Event Log. *Effect on published output: Correctly publishes alarm and event records. | X | |
ACM 9.0.1 | Protocols: DNP3 Protocol | Issue | Uses meter config file from device to publish string events as well as FLOWCAL events to non-Generic meters. | X | |
ACM 9.0.1 | Protocols: DNP3 Protocol | Issue | In cases where this can be detected before polling, does not try to retrieve records from empty or unconfigured archives. | X | |
ACM 9.0.1 | Protocols: DNP3 Protocol | Issue | Corrects an issue so that alias items are added correctly via browsing in an OPC client. | ||
ACM 9.0.1 | Protocols: DNP3 Protocol | Issue | Corrects an issue that caused incorrect meter configuration values for VersionNumber, CalculationMethod and HeatingValueUnits to be published when using meter config file read from FBx device. *Effect on published output: The values for VersionNumber, CalculationMethod and HeatingValueUnits will be published correctly. | X | |
ACM 9.0.1 | Protocols: DNP3 Protocol | Issue | Changes the dropdown list that selects the meter run into a numeric updown control in the Meter Runs tab. | ||
ACM 9.0.1 | Protocols: Flow Automation Protocol | Issue | Corrects an issue that caused YesterdayFlowTime and YesterFlowEnergy to be incorrectly retrieved when the "Retrieve yesterday flow time or energy using history message" option was checked. | ||
ACM 9.0.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects a potential memory leak. | ||
ACM 9.0.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that prevented the Unit types for Pressure and Temperature audit record fields from being published for an ER type device. *Effect on published output: For ER type devices, the Units for Temperature and Pressure fields will now be published. | X | |
ACM 9.0.1 | Protocols: Modbus Protocol | Issue | Corrects the default data type for BlockStart-BlockEnd values to unsigned and adds an "S" item conversion to allow values to be output as signed. | ||
ACM 9.0.1 | Protocols: Omni Modbus Protocol | Issue | Corrects an issue that prevented subsequent archives from being requested after processing the GC archive for Archive 1. | ||
ACM 9.0.1 | Protocols: Omni Modbus Protocol | Issue | Prevents a crash from occurring when polling raw data upload. | ||
ACM 9.0.1 | Protocols: ROC Protocol | Issue | No longer updates the item quality when the "test" of the primary connection fails when using the Auto Recover feature. | ||
ACM 9.0.1 | Protocols: ROC Protocol | Issue | Displays the correct log message type in the logger when the "Items in message" log option is enabled. | ||
ACM 9.0.1 | Protocols: ROC Protocol | Issue | Corrects an issue in detecting the ROC model type that prevented ROC history collection settings from updating properly. | ||
ACM 9.0.1 | Protocols: Totalflow Protocol | Issue | Corrects an issue that prevented LastHourlyRecord/1 from being initialized correctly with the latest hourly record time stamp. | ||
ACM 9.0.1 | Protocols: Totalflow Protocol | Issue | Corrects an issue that occurred when the field device handles a request for a history record at the "maximum position" by returning more than one record. | ||
ACM 9.0.1 | Protocols: Totalflow Protocol | Issue | Prevents a poll on the primary connection from switching to the secondary connection when an item with the secondary connection specifier failed to poll. | ||
ACM 9.0.1 | Protocols: Totalflow Protocol | Issue | Corrects an issue that prevented the daily record from being collected when using the "number of days" method in the DB2 protocol. | ||
ACM 9.0.1 | Protocols: Weatherford Protocol | Issue | Corrects an issue that prevented card data from publishing to a database when the number of data points in the card set exceeded the maximum column count of the table. *Effect on published output: When publishing card data using Function Code 25, the position/load data pair field names now starts with "Position0" and "Load0" for each individual stroke record in the card set as opposed to the field name index continuing to increment across the entire card set. | X | |
ACM 9.0.1 | Publishing | Issue | Corrects an issue that prevented FPV Method change events from publishing to the FLOWCAL Transaction Queue. *Effect on published output: Events for changing the FPV Method value will now publish correctly to the FLOWCAL Transaction Queue. | X | |
ACM 9.0.1 | Publishing | Issue | Corrects a PGAS XML publishing issue that created an unnecessary transaction with an empty 'METER' element. | ||
ACM 9.0.1 | Publishing | Issue | Prevents the asiPublish process from hanging when asiData is being shut down. | ||
ACM 9.0.1 | Publishing | Issue | Corrects an issue that stopped publishing to the FLOWCAL Transaction Queue when a record had an invalid future timestamp. | ||
ACM 9.0.1 | Reports | Issue | Logs the query of a scheduled report when the "Report Logging" option is enabled. | ||
ACM 9.0.1 | Reports | Issue | Corrects an issue that prevented users from requested unlimited records when running reports. | ||
ACM 9.0.1 | Server Monitor | Issue | Corrects an issue in the ACM Database Safe Mode backup that caused the backup to fail if there are orphaned properties or items for a device that does not exist. | ||
| ACM 9.0.1 | Server Monitor | Issue | Prevents an exception in the Server Monitor that could occur when retrieving ACM license request information when FIPS is enabled in the Group Policy. | ||
ACM 9.0.1 | Tools | Issue | Corrects an issue that could cause one OPC item to replace a previous OPC item in the ACM memory. This only affects the 64-bit version of ACM. | ||
ACM 9.0 | ACM Server | Issue | Resolves issues related to OPC client browsing when clients use absolute browse paths instead of relative browsing. | ||
ACM 9.0 | ACM Server | Issue | Adds information to GC Request logging to indicate where a failure occurred. GC Status updates that do not change rows will return a DB Error status. | ||
ACM 9.0 | API | Issue | Corrects an issue in the API which reported that "Server" objects are creatable. | ||
ACM 9.0 | Client Application | Feature | Adds the Object ID and Description to the search results form. | ||
ACM 9.0 | Client Application | Feature | Adds a new tool that processes SCADA XML files containing Emerson DNP3 object/parameter names and provides the ability to create, update or replace ACM Alias Group items. | ||
ACM 9.0 | Client Application | Feature | Provides the ability to assign multiple alias groups to devices and views. | ||
ACM 9.0 | Client Application | Feature | Adds the ability to assign an Interval to Alias Groups. | ||
ACM 9.0 | Client Application | Feature | Adds the feature to drop down boxes on the Reports tab to automatically filter results while typing. | ||
ACM 9.0 | Client Application | Issue | Corrects an issue that occasionally caused an incorrect command name to be logged in the database. | ||
ACM 9.0 | Client Application | Issue | Corrects the message regarding the maximum number of archive records that can be published from 1000 to 5000 to match the actual functionality. | ||
ACM 9.0 | Client Application | Issue | Corrects various forms throughout ACM where fields and buttons were enabled when they shouldn't have been. | ||
ACM 9.0 | Client Application | Issue | The Add/Select object window will now retain its size when closed and reopened. | ||
ACM 9.0 | Client Application | Issue | Corrects an issue which caused ACM to crash after renaming a device, then renaming its meter to the same name, but saving changes to the meter before saving the device. | ||
ACM 9.0 | Client Application | Issue | Prevents invalid data from being saved by disabling the Save button when text is deleted from a required field and when invalid data is entered. | ||
ACM 9.0 | Client Application | Issue | Corrects the tab order on the "Database" tab of the configuration form of the $Server object. | ||
ACM 9.0 | Client Application | Issue | Prevents ACM Configuration from attempting to use an http port when connecting to ACM if one has not been configured. | ||
ACM 9.0 | Client Application | Issue | Displays a new error message when an object name contains a carriage return in the name. | ||
ACM 9.0 | Configuration Database | Issue | Adds a setting in ACM Monitor called "Keep Meter History". By default this is set to true and ACM will continue to keep meter record history as in previous versions of ACM. If this is unselected, ACM will no longer move meter records into history, and and ACM will only have current meter records. | ||
ACM 9.0 | Configuration Server | Issue | Changes the default value for deleting old history to "Disabled". | ||
ACM 9.0 | Feature | Protocols: SCADAPack Protocol | Adds support for SCADAPack x70 series RTUs. | ||
ACM 9.0 | Feature | Protocols: SCADAPack Protocol | Adds support for RealFlo 7.0. | ||
ACM 9.0 | Feature | Protocols: SCADAPack Protocol | Adds support for AGA3-2013. | ||
ACM 9.0 | Issue | Configuration Database | Removes the logic from the following deprecated stored procedures: asi_spPubNewRecords, asi_spPubNewMeterRecords, asi_spGetHourlyGapsMain, asi_spGetHourlyGaps, asi_spGetHourly, asi_spGetDailyGapsMain, asi_spGetDailyGaps, asi_spGetDaily, asi_spChildObjects, asi_spDeleteOldArchiveRecords, asi_spDeleteOldArchiveRecords2. The empty stored procedures will remain in the database as replicated stored procedures cannot be "dropped". | ||
ACM 9.0 | Issue | Configuration Database | Modifies the Meter Historization process stored procedure to improve processing speed. | ||
ACM 9.0 | Issue | Configuration Database | Deletes Meter Record History rows (in tblMeterRecordsHistory) for meters that do not exist in the ACM configuration. | ||
ACM 9.0 | Logging | Issue | Corrects an issue that caused messages to be split into multiple lines in the log file. | ||
ACM 9.0 | OPC Items | Issue | Corrects an issue that prevented Detail Items from displaying correctly in an OPC browse. | ||
ACM 9.0 | Protocols: Base Protocol | Issue | Corrects an issue that could prevent a device from returning to its regular polling schedule if its alternative schedule was disabled while the device was actively polling on that alternative schedule. | ||
ACM 9.0 | Protocols: Base Protocol | Issue | Changes the Quality of Extended Items to "Bad" when a device is disabled and "Good" when the device is enabled. This change affects the ROC, Totalflow, Honeywell Mercury, ControlLogix and Modbus Devices. | ||
ACM 9.0 | Protocols: Benchmark Protocol | Issue | Corrects an issue related to writing to multiple items at once that could cause asiData to crash. | ||
ACM 9.0 | Protocols: BSAP Protocol | Feature | Adds ControlWave signal items to RBE polls. | ||
ACM 9.0 | Protocols: BSAP Protocol | Issue | Corrects an issue that prevented the item value from saving for upload pointer and time sync item reads. | ||
ACM 9.0 | Protocols: ControlLogix Protocol | Issue | Corrects an issue in the "Processor Slot Number" field on the device tab that allowed out of range values to be entered. The valid range is 0 to 255. | ||
ACM 9.0 | Protocols: DNP3 Protocol | Feature | Implements items to log FBx meter configuration file data. These items are: LogMeterFileDP/{meter number}, LogMeterFileLinear/{meter number}, LogMeterFileLiquid/{meter number} and LogMeterFileList. | ||
ACM 9.0 | Protocols: DNP3 Protocol | Feature | Adds an option "Use history points from device" to the Archive Collection tab's EFM Options to signify to ACM to use the FBx history header to publish history records. *Effect on published output: When the "Use history points from device" option is selected, the FBx history header will be used to publish history records. | X | |
ACM 9.0 | Protocols: DNP3 Protocol | Feature | Adds an option "Use meter config from device" to the Archive Collection tab's EFM Options to signify to ACM to use the FBx meter config file to: *Read event and alarm records. *Read the meter list and meter config files from the device to determine which items to read and publish as meter configuration records *Effect on published output: When the "Use meter config from device" option is checked, published event, alarm and meter configuration records will be determined by the FBx meter config file. | X | |
ACM 9.0 | Protocols: DNP3 Protocol | Issue | Corrects problems with poll cycle interrupts and DNP3 message sequences that shouldn't be interrupted. | ||
ACM 9.0 | Protocols: Flow Automation Protocol | Issue | Corrects an issue that caused duplicate factor events to be published to the FLOWCAL Transaction Queue, which caused the publisher to fail. | ||
ACM 9.0 | Protocols: Honeywell - Mercury Protocol | Feature | Adds support for using configurable archive records. | ||
ACM 9.0 | Protocols: Honeywell - Mercury Protocol | Feature | Adds OPC item "MoveAudit" that provides the ability to move each Audit pointer to the desired date and time. | ||
ACM 9.0 | Protocols: Honeywell - Mercury Protocol | Feature | Adds OPC item "ChangeACS" in order for the user to change the access code. This is only supported for non-350 series controllers. | ||
ACM 9.0 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that caused gaps to occur in history records after an ACK message timed out. Now, instead of skipping to the next record, the driver will attempt to recollect the previous record. | ||
ACM 9.0 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that could cause an access violation error when certain noise bytes are received in a poll response. | ||
ACM 9.0 | Protocols: Honeywell - Mercury Protocol | Issue | Adds a new informational message when time synchronization is completed. | ||
ACM 9.0 | Protocols: Micro MP3 Protocol | Feature | Adds the ability to poll and publish alternative (non-truck-loading) batch records. *Effect on published output: Alternative (non-truck-loading) batch records can now be published. | X | |
ACM 9.0 | Protocols: NGCTT Protocol | Issue | Corrects an issue that caused history polling to terminate when 10 04 bytes were returned from a device in the middle of polling. | ||
ACM 9.0 | Protocols: ROC Protocol | Feature | Adds compressibility (Zs and Zb) to the meter configuration record for Directive 17 Compliance. *Effect on published output: The compressibility fields (Zs and Zb) of the meter configuration record will now be published. | X | |
ACM 9.0 | Protocols: ROC Protocol | Feature | Adds the ability to process ROC 800 Liquid meter data in the GC Write service. | ||
ACM 9.0 | Protocols: ROC Protocol | Feature | Adds support for V-Cone meters. A new tab for configuring this has been added between the "Meter Runs" and "History Segments" tabs in the ROC configuration. *Effect on published output: V-Cone meter data may now be published. | X | |
ACM 9.0 | Protocols: ROC Protocol | Feature | Adds a new PGAS Output option labeled "Map Volume to INDEX_OFF and 0 to INDEX_ON" for PGAS output. *Effect on published output: If the new option is used, volume will be published to INDEX_OFF and INDEX_ON will be set to zero in the PGAS output. | X | |
ACM 9.0 | Protocols: ROC Protocol | Feature | Adds the ability to collect 'Tap Type' with meter configuration in ROC800 devices. *Effect on published output: Publisher outputs will now include 'Tap Type' in the meter configuration. | X | |
ACM 9.0 | Protocols: ROC Protocol | Feature | Adds the ability to publish Ultrasonic Data to the FLOWCAL Transaction Queue. *Effect on published output: Ultrasonic Data can now be published to the FLOWCAL Transaction Queue | X | |
ACM 9.0 | Protocols: ROC Protocol | Feature | Adds the ability to retrieve HART tags for Process Limits for the meter configuration records of ROC 800 gas and liquid devices. The HART module in ROC FB107 and any older ROC devices (200's, 300's, 500's) is not supported. *Effect on published output: If configured in the device, HART tags will be used for Process Limits when publishing meter configuration records. | X | |
ACM 9.0 | Protocols: ROC Protocol | Feature | Adds an option to the device tab "Use indicated volume for mass in mass meters." to control whether mass or indicated volume is published as mass for liquid mass meters. *Effect on published output: When the new option "Use indicated volume for mass in mass meters." is selected, indicated volume will be published as mass for liquid mass meters. If not selected, mass will be published. | X | |
ACM 9.0 | Protocols: ROC Protocol | Issue | Corrects incorrect event mapping for history segment changes in the ROC800 devices. *Effect on published output: ROC800 events for history segment changes are output correctly via CFX and Transaction Queue publishers. | X | |
ACM 9.0 | Protocols: ROC Protocol | Issue | Corrects an issue where mapping and combining points from different segments caused partial records when the segment pointers are misaligned. *Effect on published output: Complete records will be published when mapping and combining points from different segments, even when the segment pointers are misaligned. | X | |
ACM 9.0 | Protocols: ROC Protocol | Issue | ROC Validation of raw TLP OPC tags now takes into account the number and types of meters configured on the device before it attempts to poll them. | ||
ACM 9.0 | Protocols: Romet-Adem Protocol | Issue | Corrects an issue that could cause incorrect meter configuration values when using the RD command to read register values after a timeout occurs. | ||
ACM 9.0 | Protocols: SCADAPack Protocol | Issue | Corrects an issue that caused GC Write to fail for gas coriolis meter runs on controllers running RealFlo 6.95 or greater. | ||
ACM 9.0 | Protocols: SCADAPack Protocol | Issue | Corrects an issue that could cause an incorrect pipe material to be published. *Effect on published output: The correct value for Pipe Material will be published. | X | |
ACM 9.0 | Protocols: SCADAPack Protocol | Issue | Modifies the driver to use the correct registers for reading and writing heating value and gas density value. | ||
ACM 9.0 | Protocols: Scancom Protocol | Issue | Corrects an issue that prevented "Trusted Log In" from being enabled once it had been disabled. | ||
ACM 9.0 | Protocols: Scancom Protocol | Issue | Changes the "Read Only" state on FRDM items to reflect Barton documentation. | ||
ACM 9.0 | Protocols: Scancom Protocol | Issue | Corrects an issue when writing to multiple items at once that caused the message to be too large for the PLC to process. This resulted in no response and communication failure. | ||
ACM 9.0 | Protocols: Teledyne CA Protocol | Issue | Corrects an issue in the driver that could prevent items of higher cards and points from being polled, which resulted in invalid item values. | ||
ACM 9.0 | Protocols: Totalflow Protocol | Issue | Corrects an issue that caused the "Use FT" and "Use FB" event values to be incorrectly formatted when publishing to CFX or Transaction Queue. *Effect on published output: The "Use FT" AND "Use FB" event values will be correctly formatted when publishing to CFX or Transaction Queue. | X | |
ACM 9.0 | Protocols: Totalflow Protocol | Issue | Adds the Trend Record Type to the trends tab form view. It previously only existed in the Property Grid view. | ||
ACM 9.0 | Protocols: Weatherford Protocol | Feature | Adds a Weatherford 8500 protocol module to communicate with Weatherford WellPilot RPOC, ePic VSD, ePic RPC, M8800, M8750, M2000, M8650, M8500, and EXS-1000 ESP. Other devices that use the same Weatherford/Baker/eProd 8500 protocol, or use protocol simulators, are also supported. | ||
ACM 9.0 | Protocols: Weatherford Protocol | Feature | Optimizes the performance for OPC synchronous read from device requests. | ||
ACM 9.0 | Protocols: Weatherford Protocol | Issue | Corrects an issue that could cause card data reports to publish to the wrong file if more than one device object is configured to use the same meter object. | ||
ACM 9.0 | Publishing | Feature | Adds an option to the PGAS XML output type labeled "Create files per record type" to store meter characteristic records separately from other record types. If enabled, meter characteristics records will be stored in their own file. All other record types (volume, alarm, event and quality) will be stored together. *Effect on published output: If the new PGAS XML option "Create files per record type" is selected, meter characteristic records will be stored separately from other record types in PGAS XML published outputs. | X | |
ACM 9.0 | Publishing | Feature | Field records of an Archive Field Configuration object can now be selectively configured to be skipped when publishing the EFM record. *Effect on published output: Protocols that use a configurable archive object can now be configured to selectively skip EFM record fields when publishing. | X | |
ACM 9.0 | Publishing | Issue | Corrects the default order of archive records in CFX outputs when publishing meters only. *Effect on published output: The sort order of CFX output when publishing "Meters Only" will always be by "RecordTS". | X | |
ACM 9.0 | Publishing | Issue | Corrects an issue that prevented the Contract Hour and Contract Day fields from being output to the FLOWCAL Transaction Queue. *Effect on published output: The Contract Hour and Contract Day will be output to FLOWCAL Transaction Queue. | X | |
ACM 9.0 | Publishing | Issue | Corrects the mapping of the SP and DP calibration values so they are output correctly in the PGAS publisher. *Effect on published output: The correct values for SP and DP calibration will now be output in the PGAS XML publisher. | X | |
ACM 9.0 | Reports | Issue | Optimizes the performance of retrieving and displaying report data. | ||
ACM 9.0 | Reports | Issue | Changes the heading of the 'Date' column in the Configuration Change Reports to 'Date (UTC)'. | ||
ACM 9.0 | Reports | Issue | Corrects an issue that could cause a scheduled report to run at least once a minute - ignoring the "sync time". | ||
ACM 9.0 | Server Monitor | Issue | Provides a manual update script to change the tblItems ID column to a BIGINT if the column was not upgraded due to the table being replicated. This can only be run once the tblItems table is removed from the replicated articles. | ||
ACM 9.0 | Server Monitor | Issue | Corrects an issue that prevented services from being started via the Server Monitor if the user for the ACM services did not already have the "Log on as a service" right. | ||
ACM 8.2.1 | ACM Server | Issue | Corrects a property load error that can occur when processes ACM relies upon aren't available. | ||
ACM 8.2.1 | Client Application | Issue | Corrects an issue that prevented using the "Edit Multiple" feature to edit the Protocol Options on multiple New Honeywell Mercury devices. | ||
ACM 8.2.1 | Client Application | Issue | Removes erroneous log messages that were displayed when writing to an item with "ReadUserOnly" disabled. | ||
ACM 8.2.1 | Client Application | Issue | Corrects the tool tip message for the Details tab User01 property. | ||
ACM 8.2.1 | Client Application | Issue | Corrects the checkbox list initial focus issue on multiple tabbed pages | ||
ACM 8.2.1 | Client Application | Issue | The date-time parameters in reports will now correctly display the saved date and time when editing a scheduled report. | ||
ACM 8.2.1 | Configuration Database | Issue | Improves performance of the Archive Management/Gap Detection Process. | ||
ACM 8.2.1 | Configuration Database | Issue | Improves performance of resetting a publisher, both with and without a filter. Note: Will be more efficient if appropriate indexes exist on the tables. Run the manual update script to create missing indexes. | ||
ACM 8.2.1 | Configuration Database | Issue | Improves overall publishing performance. Note: Will be more efficient if appropriate indexes exist on the tables. Run the manual update script to create missing indexes. | ||
ACM 8.2.1 | Configuration Database | Issue | Adds three reports for verifying data and schema integrity. -The "Data Integrity Report" returns information regarding potential errors in the configuration. -The "Frequent Alarm and Event Report" returns information regarding meters with alarms and events above a given quantity . -The "Database Schema Integrity Report" returns details about the production schema that does not match the installed ACM version such as missing or mismatched indexes and triggers. | ||
ACM 8.2.1 | Configuration Database | Issue | Adds a table to the ACM Database for keeping track of database version history. | ||
ACM 8.2.1 | Configuration Database | Issue | Provides a script to create all expected but missing indexes on ACM tables. | ||
ACM 8.2.1 | Configuration Database | Issue | Modifies the stored procedure that is responsible for deleting archive records to make it more efficient. | ||
ACM 8.2.1 | Connection: Base Connection | Issue | Increases the Connection Settings Reply Timeout maximum value from two minutes to three minutes. | ||
ACM 8.2.1 | Connection: Serial Connection | Issue | Corrects an issue that prevented saving configuration changes in Serial Ports. | ||
ACM 8.2.1 | Connection: TCP Listen Connection | Issue | Corrects a crash in connection modules that occurred during poll interruption. | ||
ACM 8.2.1 | GC Write Service | Issue | Corrects an issue to prevent GC Write Requests from getting stuck after 32,767 retries when using "slow mode". | ||
ACM 8.2.1 | General | Issue | Corrects the OPC item ->Server/CfgCount value update when multiple ACMConfig Clients are connected. | ||
ACM 8.2.1 | General | Issue | Corrects an issue that allowed Async Writes from an OPC client when they should have been blocked. | ||
ACM 8.2.1 | General | Issue | Corrects an issue that could cause the initial OPC refresh to fail when used by a managed language client. | ||
ACM 8.2.1 | Issue | Configuration Database | Modifies the meter historization process to run in a stored procedure instead of a trigger to prevent issues with replication and clustering. | ||
ACM 8.2.1 | Issue | Configuration Database | Modifies the meter historization process to only keep unique meter FieldData | ||
ACM 8.2.1 | Issue | Protocols: Honeywell - Mercury Protocol | Corrects an issue that resulted in response packet noise byte characters being included in the CRC calculation. | ||
ACM 8.2.1 | Issue | Protocols: Honeywell - Mercury Protocol | Corrects an issue that could result in a failed EFM upload completing with a Successful Poll result. | ||
ACM 8.2.1 | Logging | Issue | Corrects a crash in asiLOGSERVER service. | ||
ACM 8.2.1 | Protocols: Benchmark Protocol | Issue | Corrects an issue that caused asiData to hang when uploading history from a Benchmark device if the server did not have DST setup. | ||
ACM 8.2.1 | Protocols: ControlLogix Protocol | Issue | Corrects an issue with Bit offsets for INT data types that stopped getting read updates after being written to with the Verify Writes option enabled. | ||
ACM 8.2.1 | Protocols: ControlLogix Protocol | Issue | Corrects an issue where invalid messages present in the buffer could cause validation logic to hang up the polling engine. | ||
ACM 8.2.1 | Protocols: ControlLogix Protocol | Issue | Lowers the Timeout Multiplier for CIP connections to help avoid running out of connection resources during rapid polling schedules. | ||
ACM 8.2.1 | Protocols: ControlLogix Protocol | Issue | Adds a new option to "Invalidate read items on Forward Open failures". When selected, the driver will Invalidate read items on Forward Open connection errors that are non-recoverable, resulting in no poll messages with item value updates during that poll cycle attempt. Improved logging details for Forward Open connection errors. | ||
ACM 8.2.1 | Protocols: Enron Modbus Protocol | Issue | Corrects an issue where EFM configuration requests were being built individually, even when poll block was enabled and registers were within range. Now these will be built as combined messages for Enron, Kinder Morgan, Prosoft, Scadapack and Scanner1150 Modbus protocol. | ||
ACM 8.2.1 | Protocols: Flow Automation Protocol | Issue | Modifies the driver to output the correct meter configuration record for Coastal Flow device type. | ||
ACM 8.2.1 | Protocols: FlowX Protocol | Issue | Provides missing device destination IP and Port as part of requested message to meet possible firewall rules. | ||
ACM 8.2.1 | Protocols: FlowX Protocol | Issue | Corrects an issue that could prevent history collection when not using an alarm map. | ||
ACM 8.2.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that prevented items from being successfully added during a restart of ACM if the device firmware did not support the new RG command. | ||
ACM 8.2.1 | Protocols: Honeywell - Mercury Protocol | Issue | Modifies the driver to correctly handle an error returned during an ACK or NAK request so that a poll cycle retry will be triggered. | ||
ACM 8.2.1 | Protocols: Honeywell - Mercury Protocol | Issue | Modifies several protocols such as the new Mercury protocol and Omni protocol to update meter record time stamp after recollection. *Effect on published output: Meter configuration records will be republished after re-collection without requiring a restart of asiData. | X | |
ACM 8.2.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue that prevented messages from being consolidated after items were removed. | ||
ACM 8.2.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects an issue when writing TS, GCWrite and NextCallinSchedule that prevented the write message from using the configured access code. | ||
ACM 8.2.1 | Protocols: Modbus Protocol | Issue | Corrects an error that prevented using the modbus "block read" item. | ||
ACM 8.2.1 | Protocols: ROC Protocol | Issue | Corrects a logger warning message which resulted when some ROC configurations published meter configuration information. | ||
ACM 8.2.1 | Protocols: Scancom Protocol | Issue | Corrects an issue with variable length strings in EFM records that resulted in reading incorrect characters from the buffer beyond the record. *Effect on published output: Invalid characters from the buffer will no longer be output in a variety of record types. | X | |
ACM 8.2.1 | Protocols: Scancom Protocol | Issue | Corrects an issue with Demand GC message not correctly building for Adept 4.0 message format. | ||
ACM 8.2.1 | Protocols: Scancom Protocol | Issue | Corrects OPC validation of hardware items so that they will will not be added if parameter and slot are not entered correctly. | ||
ACM 8.2.1 | Protocols: Scancom Protocol | Issue | Modifies the driver so that items not updated due to an error with an item id in a read are now marked as invalid. | ||
ACM 8.2.1 | Protocols: Siemens S7 Protocol | Issue | Adds configuration settings to directly control TSAP values on S7-200 model connections. | ||
ACM 8.2.1 | Protocols: Totalflow Protocol | Issue | Corrects the log messages displayed when executing the "Retrieve Meter config during next history poll" and "Reset History (LogPeriod/Daily/Event) Pointer" commands. | ||
ACM 8.2.1 | Protocols: Totalflow Protocol | Issue | Corrects an issue in the meter configuration record where multiple sets of duplicated fields were output when using the Number of Days history collection option. *Effect on published output: Meter Configuration records will no longer contain multiple duplicate fields. | X | |
ACM 8.2.1 | Publishing | Issue | Corrects an issue that could cause the FlowCal Transaction Queue publisher to insert a zero into a GC or history field when the field has no value. *Effect on published output: Empty GC and history record fields will now be blank instead of displaying a 0 in the Flowcal Transaction Queue. | X | |
ACM 8.2 | ACM Server | Feature | Adds new security options to control access to ACM from the desktop configuration program and from the mobile app. This also includes an option to control whether administrator accounts have access to ACM. Note that with these new settings, it is possible to leave the server in a state where no one has permission to change any configuration, or even access the server. | ||
ACM 8.2 | ACM Server | Issue | Adds the ability to delete history on a hourly interval. This option is found in the Manage Database wizard of ACM Monitor. | ||
ACM 8.2 | ACM Server | Issue | Corrects an issue that prevented items in the "Alias" branch from displaying correctly when browsing ACM from Ignition. | ||
ACM 8.2 | Archive Management | Issue | Adds validation to the Missing Hourly and Daily calculation for Archive Management to handle a scenario in which the same meter is being used on multiple devices | ||
ACM 8.2 | Client Application | Issue | Modifies the ACM security login to accept ".\" in the user object's domain name. | ||
ACM 8.2 | Client Application | Issue | Corrects error that occurs when changing the ROC Max Message Length property using the multi editor. | ||
ACM 8.2 | Client Application | Issue | Modifies the Alias Group validation to prevent empty alias and item names from being saved. | ||
ACM 8.2 | Configuration Database | Issue | Corrects an issue that could cause replication to fail if the tblMeterRecordsHistory is being replicated. | ||
ACM 8.2 | Connection: TCP Listen Connection | Feature | Adds a property to the TCP Listen connection object to configure an initial data timeout after an incoming socket connection is accepted. | ||
ACM 8.2 | Connection: TCP Listen Connection | Feature | Adds a new option "Delay polling on same connection" to the TCP Listen connection to delay polling a device if it uses the same connection as another device that is currently polling, even if there is a session available. This will prevent multiple conflicting connections to the same IP address and Port. | ||
ACM 8.2 | Connection: TCP Listen Connection | Issue | Prevents a TCPIP Listen connection attempt from lasting more than two minutes. | ||
ACM 8.2 | Connection: TCPIP Connection | Issue | Prevents a TCPIP connection attempt from lasting more than two minutes. | ||
ACM 8.2 | GC Write Service | Feature | Adds support for a comma separated list to be used as the Area ID in queries against the Flowcal database for GC Writes. This allows multiple Areas to use the same ACM Server for GC Writes. | ||
ACM 8.2 | General | Issue | Corrects an issue that prevented items in the $Perf object from being validated and added from OPC clients. | ||
ACM 8.2 | Logging | Feature | Adds the assembly version number to the source column in the Log Viewer. | ||
ACM 8.2 | OPC Client | Issue | Standardizes the initialization of writeable Extended items to "Good" quality. | ||
ACM 8.2 | OPC Client | Issue | Modifies the OPC test client to allow for a value to be written to an item more than once, even if the value didn't change. | ||
ACM 8.2 | Protocols: Base Protocol | Feature | Adds the device detail tab fields as OPC Items. | ||
ACM 8.2 | Protocols: BSAP Protocol | Feature | Adds the ability for a user to separately configure whether Serial or Ethernet protocol is used on the primary and/or secondary connections. | ||
ACM 8.2 | Protocols: BSAP Protocol | Feature | Adds support for array items to meter configuration polling. | ||
ACM 8.2 | Protocols: BSAP Protocol | Feature | Adds a configuration item token number to each meter run. This number will be used to replace a token in the items for the meter configuration reads and GC writes, so that a single Meter Configuration or Gas Chromatograph object can be used for multiple meter runs. | ||
ACM 8.2 | Protocols: BSAP Protocol | Issue | Adds support for user strings and user doubles to GC write. | ||
ACM 8.2 | Protocols: DF1 Protocol | Issue | In situations where two responses are in the buffer at the same time, the driver will move over the first packet and validate the second one as the response to process. | ||
ACM 8.2 | Protocols: DNP3 Protocol | Feature | Adds a rule option in the Meter Configuration object for yes/no fields and RelativeDensitySaturationCondition. Makes FactorFwv and FwvFactorUsed fields interchangeable. *Effect on published output: When a Meter Configuration object (the Advanced Configuration assigned to the Meter object) is used to publish meter configuration data, the fields below now use predefined constants for the "Constant" and "Rule" options. For the CSV publisher, that means that these values will be published as the text strings "Yes"/"No" (or "Wet"/"Dry"/"AsDelivered" for RelativeDensitySaturationCondition) if translation is used, and as numeric codes if translation is not used. For the XML publisher, all of the fields below will be now published within the <Common> node, rather than the <Extended> node as some of them were before: FlowingPressureEffectEnabled, Live Analysis, Live BTU, Live Gravity, Live Temperature, HasDefaultTemperature, UseRTD, FwvFactorUsed, FwvsFactorUsed, HasRTD, TemperatureCompensated, PressureCompensated, FactorFa, FactorFb, FactorFg, FactorFpv, FactorFr, FactorFt, FactorFwv, FactorY, RelativeDensitySaturationCondition | X | |
ACM 8.2 | Protocols: DNP3 Protocol | Feature | Adds support for new objects, parameters, measurements, and units in Emerson FBx firmware release 02.04.01.09. | ||
ACM 8.2 | Protocols: DNP3 Protocol | Feature | Adds support for new objects, parameters, measurements, and units in Emerson FBx firmware release 02.05.01.10. | ||
ACM 8.2 | Protocols: DNP3 Protocol | Feature | Adds support for new objects, parameters, measurements, and units in Emerson FBx firmware release 02.07.00.80. *Effect on published output: Corrects viscosity unit name from pound-feet per second (wrong) to pounds mass per foot-second (right according to CFX5 documentation), changes DPCalibrationRangeHigh to match DPCalibrationLow, and fixes unit ID issue with ENUM16 and BIN* data types. | X | |
ACM 8.2 | Protocols: DNP3 Protocol | Issue | Adds FBx to ACM unit mappings that were left out of previous updates. *Effect on published output: History fields may be published with new unit types. | X | |
ACM 8.2 | Protocols: DNP3 Protocol | Issue | Converts new DNP3 FBx unit types for use in the ACM publishers. | ||
ACM 8.2 | Protocols: Flow Automation Protocol | Feature | Adds history collection support for the Flow Automation Williams Gas load. *Effect on published output: The CFX publisher will now show valid data for GC data in the meter configuration section where previously it was invalid. | X | |
ACM 8.2 | Protocols: Flow Automation Protocol | Feature | Adds read and write item support for function types Plunger Lift (config and instantaneous) and Drip Control for Flow Automation devices with the Coastal Flow load. | ||
ACM 8.2 | Protocols: Flow Automation Protocol | Issue | Corrects a GC Write issue in the Williams Gas Load that could cause the GC Write to fail after reading partial GC items. | ||
ACM 8.2 | Protocols: FlowX Protocol | Feature | Adds a new command that allows for copying an existing tag file from a configured device. | ||
ACM 8.2 | Protocols: FlowX Protocol | Issue | Adds validation to the Flow-X History Map to prevent duplicate Field Identifiers from being used. | ||
ACM 8.2 | Protocols: Hex Repeater Protocol | Issue | Corrects an issue that prevented writes to device configuration items unless the ACM license has the 'history' feature enabled. | ||
ACM 8.2 | Protocols: Micro MP3 Protocol | Feature | Adds support for Dynamic Flow Computer's MicroMP3 Liquid Flow Computer using the Modbus/MicroMP3 protocol. - MicroMP3 supports both the truck ticket mode and the full six meter flow computer mode. - MicroMP3 provides the ability to retrieve and publish daily and monthly batch report records. - MicroMP3 allows for time synchronization. *Effect on published output: This release adds support for Dynamic Flow Computer's MicroMP3 Liquid Flow Computer using the Modbus/MicroMP3 protocol. | X | |
ACM 8.2 | Protocols: ROC Protocol | Feature | Adds more units for ROC meter configuration such as differential pressure units, uncorrected volume units to the CFX Output. *Effect on published output: For ROC meter configuration, more units (such as differential pressure units, uncorrected volume units) will be output. | X | |
ACM 8.2 | Protocols: ROC Protocol | Feature | Adds a new option "Combine data from all segments into the same archive records" to combine a meter's data from different segments into the same record. *Effect on published output: If the new option "Combine data from all segments into the same archive records" is selected and the user has a meter mapped with fields in different segments, then the fields will be combined into the same record. | X | |
ACM 8.2 | Protocols: ROC Protocol | Feature | Adds support for publishing data to Flowcal Ultrasonic Diagnostic area. *Effect on published output: Only if customers map the new Ultrasonic EFM IDs to historized points. Existing customers will not be affected. | X | |
ACM 8.2 | Protocols: ROC Protocol | Feature | Adds the ability to set a ROC device date/time to any value required via new Extended OPC tag ClockSet. | ||
ACM 8.2 | Protocols: ROC Protocol | Issue | Corrects an issue where some history point mappings could lead to sporadic partial history records. *Effect on published output: This corrects an issue where some history point mappings can lead to sporadic partial history records. | X | |
ACM 8.2 | Protocols: ROC Protocol | Issue | Corrects an issue where configuring a "First Collection Count" of 0 caused no records to be retrieved. Instead, a limit of 0 is now treated as if no limit is defined and all available records will be collected. *Effect on published output: When the archive limit is set to zero, all records will be returned. | X | |
ACM 8.2 | Protocols: ROC Protocol | Issue | Corrects an issue where external mapping with an EFM ID of UNKNOWN produced unexpected results. *Effect on published output: Corrects an issue where an external mapping with the ACM field identifier "Unknown" could cause incorrect results in published history records. | X | |
ACM 8.2 | Protocols: Romet-Adem Protocol | Issue | Corrects an issue in referenced object text boxes that caused names to be truncated in the display. | ||
ACM 8.2 | Protocols: SCADAPack Protocol | Feature | Adds the ability to upload batch history records. *Effect on published output: Historical batch records can now be published. | X | |
ACM 8.2 | Protocols: Teledyne CA Protocol | Feature | Adds the ability to retrieve a specific bit address and width from Analog, Greycode and Digital items. | ||
ACM 8.2 | Protocols: Totalflow Protocol | Feature | Adds 'TIMESTAMP' and 'TIMESTAMPUTC' modifiers for app.array.index items to provide date/time in local and UTC timestamp format. | ||
ACM 8.2 | Publishing | Feature | Adds non-configuration and DPTransducerRangeLow events for CFX7/CFX8. *Effect on published output: Some events that were not previously published as CFX events now will be. | X | |
ACM 8.2 | Publishing | Feature | Provides an option to adjust the timestamp of gas quality records published through the PGAS XML output object. *Effect on published output: The timestamp of gas quality records will be published according to the PGAS XML setting. | X | |
ACM 8.2 | Publishing | Feature | Adds the ability to use tokens in the form $$Fieldn$$ (where 'n' represents the one-based index of a field in a history record) in a path or file name of the CSV publisher. *Effect on published output: When the new token is used in a path or file name of the CSV publisher, the CSV output will be split into multiple files and/or folders according to the field value. | X | |
ACM 8.2 | Publishing | Feature | Improves error messages generated by the PGAS XML publisher by providing more detail in the logged message. | ||
ACM 8.2 | Publishing | Issue | Adds Flow Time to the CFX8 batch records. *Effect on published output: Flow Time will now be included in CFX8 batch records. | X | |
ACM 8.2 | Server Monitor | Feature | Adds the ability to save a custom database connection setting in the ACM Monitor. | ||
ACM 8.2 | Server Monitor | Feature | Adds the ability to run individual SQL scripts via the ACM Monitor Database Wizard. | ||
ACM 8.2 | Server Object Model | Issue | Modifies the client application to display the "Out of Sync" message on an open form if that object was modified during an import. | ||
ACM 8.1.1 | Alias Groups/Items | Issue | Corrects an issue causing the AliasName field in tblItems to be cleared out. ACM will now only update the AliasName field in the tblItems if a non-null value comes in. | ||
ACM 8.1.1 | Archive Management | Issue | Modified Archive Management to allow Station Meters to be included in the results. | ||
ACM 8.1.1 | Client Application | Issue | Corrects the Server Monitor property grids to display updated values when the "Reset" button is clicked. | ||
ACM 8.1.1 | Client Application | Issue | Improved load time when switching between modes in the tree view. | ||
ACM 8.1.1 | Client Application | Issue | Modified the Reporting tab to prevent null values from being selected for dates and numeric fields. Improved the error messages for the Publisher Filter Report. | ||
ACM 8.1.1 | Client Application | Issue | Prevents crash when adding Alias Group or View objects while security is enabled. | ||
ACM 8.1.1 | Client Application | Issue | Corrects an issue that prevented editing of the search criteria in the main ACM search bar. | ||
ACM 8.1.1 | Client Application | Issue | Corrects an issue that could cause unhandled exceptions in the Role form. | ||
ACM 8.1.1 | Configuration Database | Issue | Corrects a error that could prevent persistent data from loading due to conversion from the data storage format to the native format required by OPC items. | ||
ACM 8.1.1 | Configuration Database | Issue | Modified the tblItems table definition to make the ID column a BIGINT | ||
ACM 8.1.1 | Configuration Database | Issue | Prevents a device's item data from entering persistent storage after the device has been deleted. | ||
ACM 8.1.1 | Configuration Server | Issue | If the ConfigServer fails to load objects from database due to a missing stored procedure, ACM will prompt to verify the ACM database is up to date. | ||
ACM 8.1.1 | General | Issue | Corrects for $Server.PctProcessMemory item having a negative number. | ||
ACM 8.1.1 | Importer/Exporter | Issue | Resolved a potential error when exporting from the Primary and Secondary views in the tree. | ||
ACM 8.1.1 | Logging | Issue | Corrects an issue that occasionally prevented a port's Queue Viewer from showing data. | ||
ACM 8.1.1 | Protocols: Base Protocol | Issue | Corrects an error that prevented some OPC client read requests from completing successfully. Requests to read 'from device' could use a truncated handle in the 64-bit version of ACM. | ||
ACM 8.1.1 | Protocols: Base Protocol | Issue | Corrects an issue causing the demand poll to be stuck on the primary connection. This issue appeared if the primary was demanded while getting time outs and switched to secondary before demand was performed. | ||
ACM 8.1.1 | Protocols: Benchmark Protocol | Issue | Benchmark will send an ACK before interruption. Allow the low command items with different intervals to be added in the same request as interval 1 with medium priority except for the low command items with additional extensions. | ||
ACM 8.1.1 | Protocols: ControlLogix Protocol | Issue | Corrects an issue causing ACM to crash due to the driver attempting to process message responses that do not match the current message being validated. | ||
ACM 8.1.1 | Protocols: ControlLogix Protocol | Issue | Corrects an issue in the ControlLogix Time Sync function that showed an invalid error message in the logs. | ||
ACM 8.1.1 | Protocols: Enron Modbus Protocol | Issue | Adds a new GC option titled "Require a GC record to each periodic record." to enforce the history record output only when matching GC records are found. *Effect on published output: When this option is enabled no history will be output if the GC collection fails while collecting the same time stamped history records. | X | |
ACM 8.1.1 | Protocols: Enron Modbus Protocol | Issue | Corrects an issue where the GC archive is not requested for a meter with an index greater than two, even when configured. *Effect on published output: The new DLL will allow GC to be output with Enron Modbus meters that have an index greater than two. | X | |
ACM 8.1.1 | Protocols: Enron Modbus Protocol | Issue | Corrects an issue preventing a new advanced meter configuration from being applied after switching from an old object. | ||
ACM 8.1.1 | Protocols: Enron Modbus Protocol | Issue | Cleaned up the log messages when clearing additional GC records. | ||
ACM 8.1.1 | Protocols: FlowX Protocol | Issue | Corrects an issue in the Flow-X driver that prevented items with an interval specified from being polled. | ||
ACM 8.1.1 | Protocols: GE SRTP Protocol | Issue | Corrects an issue that caused boolean and bit registers from showing the correct value in some OPC client applications. | ||
ACM 8.1.1 | Protocols: Honeywell - Mercury Protocol | Issue | Corrects issue with certain Extended items that could cause ACM to become unresponsive when the item is deleted in the client application. | ||
ACM 8.1.1 | Protocols: Mercury Protocol | Issue | Corrects an issue that would cause the GC Write download to abort if a component value was missing from the input file. Added a new option to specify that only the first three gas quality components will be published or downloaded with a GC write, even if the RTU supports twenty-two components. | ||
ACM 8.1.1 | Protocols: Mercury Protocol | Issue | Corrects an issue that prevented New Mercury Archive Objects from showing references when executing "Get References to Object". | ||
ACM 8.1.1 | Protocols: Modbus Protocol | Issue | Corrects an issue that sometimes prevented the Advance Meter Configuration option from overriding the default value during publishing. *Effect on published output: If available, the Advanced Meter Config value will be published in place of the device value instead of adding the override as an additional field. | X | |
ACM 8.1.1 | Protocols: Omni Modbus Protocol | Issue | Adds the ability for the OMNI 7000 to use external maps for Raw archives. | ||
ACM 8.1.1 | Protocols: Omni Modbus Protocol | Issue | Corrects an issue that caused the OMNI 7000 to loop infinitely when liquid meters could not be read due to incorrect register set settings. | ||
ACM 8.1.1 | Protocols: ROC Protocol | Feature | Changes the message received when K-Factor is not read from the Pulse Input Module from an Error to a Warning. | ||
ACM 8.1.1 | Protocols: ROC Protocol | Feature | Modified the ROC user form to obscure the device password if one is entered. | ||
ACM 8.1.1 | Protocols: ROC Protocol | Issue | Adds OPC tag modifiers "LastHourlyRecord/Station" and "LastDailyRecord/Station" for ROC 80x devices. | ||
ACM 8.1.1 | Protocols: ROC Protocol | Issue | Adds validation to verify that meters assigned to a device are still valid meters in ACM before polling. | ||
ACM 8.1.1 | Protocols: Romet-Adem Protocol | Issue | Corrects an issue with the new Honeywell Mercury protocol that could cause logging on to a Mercury Modem to fail. Corrects an issue with the new Honeywell Mercury protocol that caused the meter configuration upload to abort if the RTU returned an error response to the RD command. Corrects an issue with the new Honeywell Mercury protocol that caused AGA8 items to be attempted to be read even when the firmware version did not support them. Corrects an issue with the Romet-Adem protocol that could cause logging on to a Mercury Modem to fail. | ||
ACM 8.1.1 | Protocols: Romet-Adem Protocol | Issue | Corrects an issue that could cause the RE event command to fail on some Mercury devices. | ||
ACM 8.1.1 | Protocols: Romet-Adem Protocol | Issue | Corrects an issue that could cause audit records not to publish because of missing meter configuration record. *Effect on published output: All audit records will now be published. | X | |
ACM 8.1.1 | Protocols: SCADAPack Protocol | Issue | Corrects an issue causing the Scadapack history command to loop indefinitely if Command 1 was returned "Not Ready" and the command retry count was not set to zero. | ||
ACM 8.1.1 | Protocols: Siemens S7 Protocol | Issue | Corrects an issue with the Integer item modifier to correctly assign a conical data type of Signed Integer (VT_I2). | ||
ACM 8.1.1 | Protocols: Siemens S7 Protocol | Issue | Corrects an issue with "4 byte" data type writes going out as L/H WORD order. Corrects an issue where "Real" data types were returned as UI4 unsigned values. | ||
ACM 8.1.1 | Protocols: Totalflow Protocol | Issue | Corrects an issue caused by a split log period record missing its matching GC record. *Effect on published output: This update corrects an issue that prevented GC trend data from merging with periodic data when a split periodic record was found. | X | |
ACM 8.1.1 | Protocols: Totalflow Protocol | Issue | Corrects the assignment of 'Live Temperature' in the meter characteristics of EFM published outputs for Totalflow devices. *Effect on published output: Correctly assign 'Live Temperature' in the meter characteristics of EFM published outputs for Totalflow devices. | X | |
ACM 8.1.1 | Publishing | Issue | The alarm description (if present) will be included in the FLOWCAL Transaction Queue alarm record output 'string_value' column. *Effect on published output: The alarm description (if present) will be included in the FLOWCAL Transaction Queue alarm record output 'string_value' column. | X | |
ACM 8.1.1 | Reports | Issue | Corrects an issue that prevented Throughput Reports from returning records. |
Out of Maintenance Releases
...
Release
...
Category
...
Type
...
Text
...
ACM 8.1
...
ACM Server
...
Feature
...
Adds a "LicenseExpiration" OPC item to show the date and time when the ACM license will expire, if the license is is a temporary one. If the license is not a temporary one, the item will show 12:00:00 AM with no date and the item's quality will be Bad.
...
ACM 8.1
...
ACM Server
...
Issue
...
Adds message logging to show time spent during ACM startup.
...
ACM 8.1
...
Client Application
...
Feature
...
Adds the ability to enter multiple letters in the Multiple Objects selection box to more easily select desired item.
...
ACM 8.1
...
Client Application
...
Issue
...
Corrects an issue in the "Get References to Object" function that prevented it from working for objects with an "&" in their name.
...
ACM 8.1
...
Client Application
...
Issue
...
Corrects an issue that prevented multi-editor filters from opening in ACM Configuration when the data path had been changed in ACM Monitor.
...
ACM 8.1
...
Client Application
...
Issue
...
Modified the "Publish a Device" command to return the appropriate error message when running the command without a Device Id.
...
ACM 8.1
...
Configuration Database
...
Issue
...
Improved the Archive Record deletion process to prevent timeouts.
...
ACM 8.1
...
GC Write Service
...
Feature
...
Allows CSV files created for the GC Write File Service to have empty fields when a component has no value. An empty field will not be used as a value.
...
ACM 8.1
...
General
...
Issue
...
Improved the error message logged when an item with an incomplete name is added by an OPC client.
...
ACM 8.1
...
General
...
Issue
...
Stopped ACM from crash when adding items that has persist data enabled and stored in ACM configuration database.
...
ACM 8.1
...
General
...
Issue
...
Corrects an issue that caused the Sinewave item to stop updating when ACM has been running for an extended period of time.
...
ACM 8.1
...
Protocols: BSAP Protocol
...
Issue
...
Made a modification to set a flag in every retry message to cause the device to accept the retry message even if it didn't receive the original message due to a communication time out.
...
ACM 8.1
...
Protocols: ControlLogix Protocol
...
Issue
...
Corrects an issue that could cause some user-defined tag structures to incorrectly report invalid member names resulting in those tags being excluded from tag discovery.
...
ACM 8.1
...
Protocols: DF1 Protocol
...
Issue
...
Corrects logging for extended error messages on ethernet devices.
...
ACM 8.1
...
Protocols: DF1 Protocol
...
Issue
...
Corrects an issue with bit offsets causing a 1 to be returned instead of VARIANT_TRUE (-1). *Effect on published output: May affect published output if the previous output expected "1" or had a conversion in place to change to -1.
...
X
...
ACM 8.1
...
Protocols: DNP3 Protocol
...
Feature
...
Adds new objects, parameters, measurement types, and units in support of the April 2020 FB3000 firmware release.
...
ACM 8.1
...
Protocols: DNP3 Protocol
...
Feature
...
Adds the options to publish unmapped events and/or alarms to all meters.
...
ACM 8.1
...
Protocols: DNP3 Protocol
...
Feature
...
Adds new object parameters per the February 2020 FB3000 Firmware.
...
ACM 8.1
...
Protocols: DNP3 Protocol
...
Feature
...
Increased the number of station meters from 24 to 72 for the DNP3 FBx.
...
ACM 8.1
...
Protocols: DNP3 Protocol
...
Issue
...
Corrects issues in DNP3 FBx with regards to read after write verification, octet string writes, and control block select-operate writes.
...
ACM 8.1
...
Protocols: DNP3 Protocol
...
Issue
...
Corrects an issue with processing upload record sequence numbers.
...
ACM 8.1
...
Protocols: Enron Modbus Protocol
...
Issue
...
Corrects an issue in the history collection that caused the wrong index to be used when using a push down archive with a single record.
...
ACM 8.1
...
Protocols: Enron Modbus Protocol
...
Issue
...
Corrects an issue causing the first record collected to be index 0 when using the "Read from address" record range type. Instead, the current max address will be requested from the device before history collection.
...
ACM 8.1
...
Protocols: Flow Automation Protocol
...
Issue
...
Corrects an issue causing history collection to fail due to an abnormal code returned when processing EFM configuration message response.
...
ACM 8.1
...
Protocols: FlowX Protocol
...
Feature
...
Adds Time Synchronization.
...
ACM 8.1
...
Protocols: FlowX Protocol
...
Feature
...
Made a modification to automatically collect tags when a command is executed if tag collection has never been performed.
...
ACM 8.1
...
Protocols: FlowX Protocol
...
Issue
...
Corrects an issue to prevent non-configured station meter data from publishing.
...
ACM 8.1
...
Protocols: Honeywell - Mercury Protocol
...
Feature
...
Implemented support for Pulse Accumulator Meter Run 2 in the new Honeywell Mercury protocol.. Implemented configurable history points in the new Honeywell Mercury protocol. *Effect on published output: Publish data may contain EFM records for Meter Run 2 for a Pulse Accumulator.
...
X
...
ACM 8.1
...
Protocols: Honeywell - Mercury Protocol
...
Feature
...
Adds logging to output a message each time an audit record is published in the New Honeywell Mercury protocol.
...
ACM 8.1
...
Protocols: Honeywell - Mercury Protocol
...
Feature
...
Created a Station Wizard.
...
ACM 8.1
...
Protocols: Honeywell - Mercury Protocol
...
Issue
...
Corrects an issue that caused the EFM upload to stop before it was complete if the last audit record in the upload caused a timestamp gap.
...
ACM 8.1
...
Protocols: Mercury Protocol
...
Issue
...
Made a modification to address timeouts during Continuous Scans by preventing a Demand poll from occurring when triggered during cry. Corrected an issue causing an incorrect message sequence to be sent out during call-in on a messenger modem.
...
ACM 8.1
...
Protocols: Mercury Protocol
...
Issue
...
Corrects an issue that caused incorrect values to be published for audit trail volume units for non-350 series devices. *Effect on published output: Audit record volume units for non-350 series Mercury devices will now have correct values.
...
X
...
ACM 8.1
...
Protocols: Mercury Protocol
...
Issue
...
Corrects an issue in new Honeywell Mercury protocol that caused some items to have an incorrect data type which could result in invalid values or statuses.
...
ACM 8.1
...
Protocols: Mercury Protocol
...
Issue
...
Corrects an issue in the new Honeywell Mercury protocol that could cause too many audit configuration registers to be polled. Corrects an issue in the new Honeywell Mercury protocol that could cause an item's units value not to be published in the audit record if the item's units could not be resolved. Corrects an issue in the new Honeywell Mercury protocol that caused response packets of audit records with less than four item fields to be processed as an error response. *Effect on published output: Item unit values are now published for all items in the audit record, including the items that do not have an associated unit. This could add additional columns to a CSV report.
...
X
...
ACM 8.1
...
Protocols: Modbus Protocol
...
Feature
...
None - this change should not be publicly announced.
...
ACM 8.1
...
Protocols: Modbus Protocol
...
Issue
...
only in the OMNI 7000 Beta
...
ACM 8.1
...
Protocols: Omni Modbus Protocol
...
Feature
...
Adds the OMNI 7000 Protocol. *Effect on published output: New files are published!
...
X
...
ACM 8.1
...
Protocols: Omni Modbus Protocol
...
Issue
...
not release yet
...
ACM 8.1
...
Protocols: Omni Modbus Protocol
...
Issue
...
OMNI Abort Task Command will remove all currently archives and reports from queue
...
ACM 8.1
...
Protocols: Omni Modbus Protocol
...
Issue
...
Corrects an issue that caused audit records with invalid timestamps to be published. Instead an error message will be logged. *Effect on published output: Audit records with invalid timestamps will no longer be published.
...
X
...
ACM 8.1
...
Protocols: ROC Protocol
...
Issue
...
Corrects an issue that did not correctly identify a meter factor change event in a ROC 80x when the meter factor was in manual mode. *Effect on published output: In a ROC device, if you have METER_FACTOR in manual mode and you change manual meter factor, you get an event. However, in PGAS XML published output, the TAG_NAME for the event METER_FACTOR was not getting set. This code change fixes that.
...
X
...
ACM 8.1
...
Protocols: ROC Protocol
...
Issue
...
Adds variables Octane, Nonane and Decane to ROC800L Internal Map. *Effect on published output: Adds new fields in the internal map for ROC800L. This should publish the fields (Octane, Nonane and Decane) in CFX and CSV
...
X
...
ACM 8.1
...
Protocols: ROC Protocol
...
Issue
...
Modified the ROC protocol to map the batch record to the correct meter configured in the external map when applied. *Effect on published output: The record is output as wrong meter.
...
X
...
ACM 8.1
...
Protocols: ROC Protocol
...
Issue
...
Corrects an issue causing extended protocol items such as MoveHourly and RetrieveHistory to indicate a bad or failed status after a write from an OPC client.
...
ACM 8.1
...
Protocols: ROC Protocol
...
Issue
...
Corrects an issue returning a "***Requested too many events***" message when the event/alarm archive wraps around to the top. *Effect on published output: Events and alarms that were not being published due to this bug will now be published.
...
X
...
ACM 8.1
...
Protocols: Romet-Adem Protocol
...
Feature
...
Adds an option to publish the KFactor units in Pulses per Cubic Meter instead of Pulses per Cubic Foot. Corrected an issue with the Romet-Adem protocol that prevented the KFactor value from being published. *Effect on published output: KFactor units will not be converted to pulses per cubic feet when the device is using cubic meters if this option is enabled. Romet-Adem devices will now publish a value for KFactor.
...
X
...
ACM 8.1
...
Protocols: Romet-Adem Protocol
...
Issue
...
Corrects an issue that caused the LogTrigger column to be missing from a CSV audit report. Modified the contents of the LogTrigger column in a CSV audit report to contain the entire T&A value. *Effect on published output: The CSV audit report will contain the LogTrigger column by default. This may add an additional column to the CSV report. The LogTrigger column in the CSV audit report will now contain the entire T&A field value.
...
X
...
ACM 8.1
...
Protocols: Romet-Adem Protocol
...
Issue
...
Corrects an issue with new HoneywellMercury protocol that could cause non-time triggered audit records to be published even when the ACM device object was configured not to do so. Corrects issue with Romet-Adem protocol that could cause non-time triggered audit records to be published even when the ACM device object was configured not to do so. *Effect on published output: Non-time triggered audit records will no be published unless ACM device object is configured to do so.
...
X
...
ACM 8.1
...
Protocols: Romet-Adem Protocol
...
Issue
...
Corrects an issue that caused EFM history records to always be published with a value of 60 for the $$Record.Period$$ field. *Effect on published output: EFM history records are now published with the correct value in the $$Record.Period$$ field.
...
X
...
ACM 8.1
...
Protocols: Romet-Adem Protocol
...
Issue
...
Corrects an issue causing history upload to continue despite a failure to read audit configuration.
...
ACM 8.1
...
Protocols: Romet-Adem Protocol
...
Issue
...
N/A only in QA build
...
ACM 8.1
...
Protocols: Scanner 1150 Protocol
...
Issue
...
Corrects the tool tip text for the "Retrieval Batch Size" field on the Modbus Scanner 1150 Archive Collection tab.
...
ACM 8.1
...
Protocols: Siemens S7 Protocol
...
Issue
...
Resolved an issue with OPC item Read/Write access showing only Writable and not Readable.
...
ACM 8.1
...
Protocols: Totalflow Protocol
...
Feature
...
Updated the Totalflow driver to use the the latest functionality available in the 3.12 version of the ABB toolkit as follows: -Publish gas analysis values from the 'extra data' associated with each log period or daily record in enhanced meters. -Standardized the gas analysis location and format. -Identify ultrasonic meter types. -Added a new property for each meter that allows it to retrieve the meter data from any meter in the device. Note: This can be used with RNC models that support many more meters than previous models. *Effect on published output: This version can identify more specific meter types, such as ultrasonic. This version can also publish gas analysis values from the 'extra data' associated with each log period or daily record in enhanced meters. The history record output format has changed to standardize the location, order and content of the gas analysis fields. When configured to be included in the output, all gas analysis fields will be published. Fields without data will have an empty or 'null' value in the output record..
...
X
...
ACM 8.1
...
Protocols: Totalflow Protocol
...
Feature
...
Adds the ability for each ACM meter to collect from a specific remote device meter by configuring a specific meter index. This is in support of the ABB RMC-100.
...
ACM 8.1
...
Protocols: Totalflow Protocol
...
Feature
...
Adds support for Coriolis and Ultrasonic meter types in published output formats. *Effect on published output: Published output will include the calc method in the Meter Configuration and the Product Index in both the history record and the liquid product record for Coriolis and Ultrasonic meter types.
...
X
...
ACM 8.1
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue that caused that the "Request 3 days of history when 2 days history is needed" option to be ignored
...
ACM 8.1
...
Protocols: Totalflow Protocol
...
Issue
...
Made a modification to stop history collection if meter configuration retrieval failed and no meter configuration data has been retrieved previously. If meter configuration data has previously been retrieved the history collection will continue.
...
ACM 8.1
...
Protocols: Totalflow Protocol
...
Issue
...
Modified the initial OPC quality of MoveEvent to be good to match the other "Move" items.
...
ACM 8.1
...
Publishing
...
Feature
...
Adds mapping for SP Transducer Range High to SP_HIGH_RANGE in the PGASXML publisher. *Effect on published output: When an EFM record contains SP Transducer Range High, SP_HIGH_RANGE is assigned and present in the output file.
...
X
...
ACM 8.1
...
Publishing
...
Issue
...
Corrects an issue in the EFM Database that caused duplicate records to be added. *Effect on published output: The EFM Database will update all existing meter records if 1 or more meter records are found instead of adding new meter records.
...
X
...
ACM 8.1
...
Publishing
...
Issue
...
Modified the PGASXML history type to convert the energy units that do not match MMBTU, DTH or GJ to DTH. *Effect on published output: When an unsupported energy unit is submitted with a PGAS record, the value and unit will be converted to DTH.
...
X
...
ACM 8.1
...
Server Monitor
...
Issue
...
Corrects an issue that prevented the display of Meter Resolution Mode options in the Gas Analysis Write File Service section of ACM Monitor properties.
...
ACM 8.0.1
...
ACM Server
...
Issue
...
Corrects an issue that occasionally caused comm stats to show values greater than 100 percent. *Effect on published output: Reports that may have shown comm stats greater than 100 percent should now show the correct values.
...
X
...
ACM 8.0.1
...
OPC Items
...
Issue
...
Corrects an issue that caused the 'ItemCount' OPC item value to lag behind the actual count of items.
...
ACM 8.0.1
...
Protocols: FlowX Protocol
...
Issue
...
Prevent an invalid meter record from being stored in the meter history table, when generated due to misconfigured station meters on a device.
...
ACM 8.0.1
...
Protocols: Honeywell - Mercury Protocol
...
Feature
...
Adds OPC items "LastPollD" and "LastPollN" for compatibility with AES.
...
ACM 8.0.1
...
Protocols: Honeywell - Mercury Protocol
...
Feature
...
Adds support in the new Honeywell Mercury protocol for fixed temperature and pressure in audit records.
...
ACM 8.0.1
...
Protocols: Honeywell - Mercury Protocol
...
Issue
...
Corrects issue in the new Honeywell Mercury protocol that could cause the unit types for pressure and volume to be published incorrectly for an EC350 device. *Effect on published output: Unit type fields for pressure and volume now have the correct value for EC350.
...
X
...
ACM 8.0.1
...
Protocols: Honeywell - Mercury Protocol
...
Issue
...
Corrects an issue that could cause EFM audit records to be skipped if comm failure occurred during upload.
...
ACM 8.0.1
...
Protocols: Mercury Protocol
...
Issue
...
Corrects issue that prevented demand to be issued using OPC item.
...
ACM 8.0.1
...
Protocols: Mercury Protocol
...
Issue
...
Corrects an issue in the new Honeywell Mercury protocol that caused communication timeout if an item's return data was an empty string.
...
ACM 8.0.1
...
Protocols: Mercury Protocol
...
Issue
...
Corrects issue in new Honeywell Mercury protocol that caused incorrect parsing of D1 audit record if units field was empty. *Effect on published output: Published audit data will have correct values for 350 series.
...
X
...
ACM 8.0.1
...
Protocols: Mercury Protocol
...
Issue
...
Corrects the call-in message sequence in the old Honeywell Mercury protocol to correctly ACK call-ins before proceeding other requests.
...
ACM 8.0.1
...
Protocols: Mercury Protocol
...
Issue
...
Corrects issue in new Honeywell Mercury protocol that caused incorrect values to be published for a EC350 meter's K-Factor. *Effect on published output: Published Meter Configuration K-Factor values for EC350 are now correct. K-Factor units are now published. This will add a new column to a CSV report.
...
X
...
ACM 8.0.1
...
Protocols: Mercury Protocol
...
Issue
...
Corrects an issue in the new Honeywell Mercury protocol that caused the gas quality configuration value for nPentane to be published as nHeptane. *Effect on published output: Meter gas quality configuration values nPentane and nHeptane will now have correct values.
...
X
...
ACM 8.0.1
...
Protocols: Mercury Protocol
...
Issue
...
Corrects an issue in the new Honeywell Mercury protocol that caused the meter configuration static pressure units to be published multiple times. *Effect on published output: Static pressure units will only be published once. This will reduce the number of columns in a CSV meter configuration report.
...
X
...
ACM 8.0.1
...
Protocols: Mercury Protocol
...
Issue
...
Adds support for additional Live Read items to the new Honeywell Mercury protocol.
...
ACM 8.0.1
...
Protocols: Mercury Protocol
...
Issue
...
Implemented GC Write Service support in the new Honeywell Mercury protocol.
...
ACM 8.0.1
...
Protocols: ROC Protocol
...
Issue
...
Corrects issue in LastHourlyRecord, LastDailyRecord, LastEventRecord and LastAlarmRecord when items are not updated after successful history collection. Extended items to include "/meter" for each meter result. If no /meter is specified by default it outputs first run result.
...
ACM 8.0.1
...
Protocols: Romet-Adem Protocol
...
Issue
...
Corrects an issue in the ROMET AdEM protocol that caused the TimeSync item to appear in OPC browse list twice. Corrects an issue in the ROMET AdEM protocol that prevented the RequestMeterConfig item from appearing in the OPC browse list.
...
ACM 8.0.1
...
Protocols: Romet-Adem Protocol
...
Issue
...
Corrects an issue in the new Honeywell Mercury protocol that caused the log on message to be sent multiple times when using a Continuous Scan cycle.
...
ACM 8.0.1
...
Protocols: Romet-Adem Protocol
...
Issue
...
Corrects an issue in the new Honeywell Mercury protocol that could cause the RetrieveHistory item to maintain a value of negative one (-1). Corrects an issue in the new Honeywell Mercury protocol that prevented the TimeSync item's value from updating. Corrects an issue in the Romet-Adem protocol that could cause the RetrieveHistory item to maintain a value of negative one (-1). Corrects an issue in the Romet-Adem protocol that prevented the TimeSync item's value from updating.
...
ACM 8.0.1
...
Protocols: Teledyne CA Protocol
...
Issue
...
Adds validation to the Greycode conversion.
...
ACM 8.0.1
...
Publishing
...
Issue
...
Corrects to CFX publishers so ACM correctly publishes the Differential Pressure or Pulse value from a history record based on the meter type and the presence of either the Differential Pressure value, the Pulse value, neither, or both. *Effect on published output: CFX publishers will determine the value to store in the DP or Pulse field of history records based on the meter type and the presence of DP or Pulse data.
...
X
...
ACM 8.0
...
ACM Server
...
Feature
...
Adds communication statistics items for each port within the TCPPool port object. Note: These components must be applied as part of a full ACM update. This feature changes the method used by ACM components to track communication statistics data. It affects all protocol modules, all connection port modules, the main polling engine, and the database. They should not be applied as a single module update.
...
ACM 8.0
...
ACM Server
...
Feature
...
Improved security configuration to allow authorized users to: - Assign permissions for Create/Update/Delete operations on all objects, objects of a specific type, or specific properties on objects of specific types. - Assign permissions for command execution on all objects, objects of a specific type, or specific commands on objects of specific types.
...
ACM 8.0
...
ACM Server
...
Feature
...
Adds "Abort Current Task" and "Dump Item List" as commands available to each protocol. These commands were previously only available via an OPC Client.
...
ACM 8.0
...
ACM Server
...
Feature
...
Adds a new option to control how often ACM updates values for items subscribed through the custom Item Server interface. Items can now be updated only when their value or quality changes, or they can be updated on every poll. This new option was added to the "Server" tab of the $Server object and is labeled "Item Update Frequency".
...
ACM 8.0
...
ACM Server
...
Issue
...
Corrects an issue that caused asiDATA to send back an unscaled value for an item with scaling flags when an OPC client did a synchronous read request before ACM had polled the item.
...
ACM 8.0
...
Archive Management
...
Issue
...
Corrects an issue in the Archive Manager causing ACM to close due to an Application Hang error.
...
ACM 8.0
...
Archive Management
...
Issue
...
Modified the Archive Management process to display the correct type of periodic history based on the "Type" selection of Hourly or Daily.
...
ACM 8.0
...
Archive Management
...
Issue
...
Resolved an issue where the toolbar on the Archive Detail screen was not functioning.
...
ACM 8.0
...
Archive Management
...
Issue
...
Updated the Archive Management tab buttons and tool tip labels to better describe the form functions. Added a refresh button to the Archive Management grid to refresh the data in the grid.
...
ACM 8.0
...
Client Application
...
Feature
...
Adds an option to the Dashboard "View" drop-down to select no active view, which cancels item subscriptions.
...
ACM 8.0
...
Client Application
...
Feature
...
Adds an option to the User Preferences to use the default datetime format or to establish a custom datetime format. All datetime tags shown within the client for the logged in user will follow this setting.
...
ACM 8.0
...
Client Application
...
Feature
...
Adds a button to the Log Viewer to mimic the behavior of the keyboard short-cut Ctrl+M to add a mark to the log.
...
ACM 8.0
...
Client Application
...
Feature
...
Adds the sub-option "Shutdown even when auto-poll enabled" under "Auto-Shutdown" to the UI form of the Server Object. This was previously only visible in the property grid view.
...
ACM 8.0
...
Client Application
...
Issue
...
Corrects an issue in the Record Collection "Add-Multi" form that allowed values greater than the maximum to be entered.
...
ACM 8.0
...
Client Application
...
Issue
...
Corrects issues that caused unexpected results when pasting into a Multi-editor grid.
...
ACM 8.0
...
Client Application
...
Issue
...
Updated messages when importing ACM configuration data to make it clear when a rename is related to leading or trailing spaces having been deleted.
...
ACM 8.0
...
Client Application
...
Issue
...
Corrects an error that prevented the selection of RTU Configuration files located on a different drive than where ACM is installed.
...
ACM 8.0
...
Client Application
...
Issue
...
Corrects an issue that displayed many pop-up error messages when the connection to the ACM Server was lost.
...
ACM 8.0
...
Client Application
...
Issue
...
Adds platform version details to the Server Information form.
...
ACM 8.0
...
Client Application
...
Issue
...
Update verbiage on the Reconnect dialog to make the options clearer. This dialog appears if the connection to the ACM Server is lost.
...
ACM 8.0
...
Client Application
...
Issue
...
Corrects the right-click action on multi-edit grids for unit fields so that all highlighted fields will be updated.
...
ACM 8.0
...
Client Application
...
Issue
...
Corrects an issue in the Archive Collection and Meter Run forms that made it appear object names were being truncated.
...
ACM 8.0
...
Client Application
...
Issue
...
Corrects an issue that caused the application to lose focus when turning off Tabular View in a record collection window.
...
ACM 8.0
...
Client Application
...
Issue
...
Allow Server Information dialog to detect greater than 4.0 versions of .NET
...
ACM 8.0
...
Configuration Database
...
Issue
...
Modified the history deletion process to keep the correct number of periodic records and to improve the speed at which records are deleted.
...
ACM 8.0
...
Configuration Database
...
Issue
...
The Safe Mode option was updated to use the Microsoft ACE OLEDB 12.0 database driver. This driver is now required for those users who enable the Safe Mode option. It is a free download from Microsoft here: https://www.microsoft.com/en-us/download/details.aspx?id=13255
...
ACM 8.0
...
Configuration Database
...
Issue
...
Corrects an issue in the Bulk Manager that caused staging tables to grow continuously with unprocessed records after timeouts.
...
ACM 8.0
...
Connection: Base Connection
...
Issue
...
Modified all port types to enforce the maximum allowed Transmit Delay of 60 seconds to prevent a very long delay period from blocking polling on the port.
...
ACM 8.0
...
Connection: TCP Listen Connection
...
Issue
...
Adds a check to Serial, TCP/IP, TCPPool and TCPListen port types to monitor transmit delay time and ensure it is limited to the 60 second maximum setting.
...
7.1.306
...
ACM Server
...
Feature
...
Adds new option for persistent data troubleshooting logging.Corrects an issue that could store the wrong user name with configuration change history.
...
7.1.306
...
ACM Server
...
Feature
...
Adds new reports for Archive Daily & Hourly Summary.
...
7.1.306
...
ACM Server
...
Feature
...
Adds optional troubleshooting logging.
...
7.1.306
...
ACM Server
...
Feature
...
Adds support for Emerson FBx tunnel command parameter reads and writes for FB3000.
...
7.1.306
...
Archive Management
...
Feature
...
Adds more granular control over the frequency and time of the gap detection process.
...
7.1.306
...
Client Application
...
Feature
...
Adds the ability to copy/paste into and out of the Multi-Object Editor.
...
7.1.306
...
Connections
...
Issue
...
Corrects an issue where the Queue Viewer showed ‘success’ when an I/O write failed.
...
7.1.306
...
Connections: TCP Pool
...
Issue
...
Improves TCPPool port to try other available modems upon failure of initialization when using 'Release when done'.
...
7.1.306
...
Protocols: Base Protocols
...
Issue
...
Corrects an issue that could leave the ‘demand’ status ‘true’ after a device was disabled.
...
7.1.306
...
Protocols: Base Protocols
...
Issue
...
Corrects an issue that could prevent history collection from resuming after a higher priority task interruption.
...
7.1.306
...
Protocols: Base Protocols
...
Issue
...
Corrects an issue that could result in a driver crash if a session object was invalid.
...
7.1.306
...
Protocols: Base Protocols
...
Issue
...
Corrects an issue that prevented license information from displaying correctly if the license file had trailing characters. This was an issue with display only, not with the server’s use of the license information.
...
7.1.306
...
Protocols: Base Protocols
...
Issue
...
Corrects an issue where a poorly configured scheduled report could terminate the report server.
...
7.1.306
...
Protocols: ControlLogix Protocol
...
Issue
...
Corrects an issue where writes to items of type D3 resulted in communication timeouts during later writes to the same items.
...
7.1.306
...
Protocols: ControlLogix Protocol
...
Issue
...
Corrects an issue where, in some conditions, user strings were being converted to floating point numbers. *Effect on Published Output: This will change the output of string fields. R4 or R8 device data type conversion to string will remain the same. String device data type conversion to string will remain the same.
...
7.1.306
...
Protocols: ControlLogix Protocol
...
Issue
...
Corrects an issue where, using the PGAS xml publisher, an incorrect time stamp could occur if more than one publisher published the same meter.
...
7.1.306
...
Protocols: ControlLogix Protocol
...
Issue
...
Corrects an issue with a DB1 device reading device setup.
...
7.1.306
...
Protocols: ControlLogix Protocol
...
Issue
...
Corrects an issue with the item used for a Test Communication poll. The item wasn’t supported for all instrument types.
...
7.1.306
...
Protocols: ControlLogix Protocol
...
Issue
...
Corrects an issue with the OLTP history map to include Mercury EFM IDs for Volume Indexes. This change will populate volume indexes that were missing from the OLTP publisher. Note: Publishing to OLTP output is not supported for Mercury devices with any of the PGAS options enabled in the Mercury protocol setup.
...
7.1.306
...
Protocols: FlowX Protocol
...
Issue
...
Corrects an issue where the service crashed upon processing a record with null string data.
...
7.1.306
...
Protocols: FlowX Protocol
...
Issue
...
Corrects an issue where time synchronization priority was using the EFM history priority.
...
7.1.306
...
Protocols: FlowX Protocol
...
Issue
...
Corrects an issue where using an invalid host name or address in the multi-server search caused an error.
...
7.1.306
...
Protocols: FlowX Protocol
...
Issue
...
Corrects an issue where writes failed when using unlisted integer tags polled as bit values.
...
7.1.306
...
Protocols: Kinder Morgan Modbus Protocol
...
Feature
...
Adds an option to skip the ‘sequence number reset check’ for Kinder Morgan devices.
...
7.1.306
...
Protocols: Kinder Morgan Modbus Protocol
...
Feature
...
Adds capabilities on the multi-record dialog grid-view for add/remove records, and to add multiple records at once.
...
7.1.306
...
Protocols: Kinder Morgan Modbus Protocol
...
Feature
...
Adds dashboard for current data views.
...
7.1.306
...
Protocols: Omni Modbus Protocol
...
Feature
...
Adds the flow computer Id (from register 4836) to the collection of meter configuration data output for FLOWCAL CFX formats. *Effect on published output: This change will add a column for the new flow computer Id value to published outputs that use the Database or CSV publishers and will fill in the Flow Computer ID field in CFX files.
...
7.1.306
...
Protocols: ROC Protocol
...
Feature
...
Adds an option to not write to E2PROM upon a gas chromatograph write. Some older versions of firmware caused the ROC to restart when this write was done.
...
7.1.306
...
Protocols: SCADAPack Protocol
...
Issue
...
Corrects an issue where history collection from a liquid meter in a SCADAPack could terminate prematurely if the ‘Leading Timestamp’ was not checked. Collection now works correctly with and without the ‘Leading Timestamp’ option enabled.
...
7.1.306
...
Protocols: SCADAPack Protocol
...
Issue
...
Corrects an issue where leading or trailing spaces on history map tag names caused errors.
...
7.1.306
...
Protocols: SCADAPack Protocol
...
Issue
...
Corrects an issue where message responses may not be processed correctly when their list of items changed.
...
7.1.306
...
Protocols: SCADAPack Protocol
...
Issue
...
Corrects an issue where PGAS xml was not treating specific gravity and relative density the same way.
...
7.1.306
...
Protocols: SCADAPack Protocol
...
Issue
...
Corrects an issue where right-clicking on a folder and selecting 'Retrieve History From Children' was attempting to retrieve history from non-device objects.
...
7.1.306
...
Protocols: SCADAPack Protocol
...
Issue
...
Corrects an issue where some of the $System object properties related to persistent data would not save properly.
...
7.1.306
...
Protocols: SCADAPack Protocol
...
Issue
...
Corrects an issue where tag names were case-sensitive.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Feature
...
Adds an option to adjust timestamp of trend records when retrieving as trend (not when retrieving for merge to volume history).
...
7.1.306
...
Protocols: Totalflow Protocol
...
Feature
...
Adds an option to check meter name in remote device against ACM meter object name and stop collection if they don't match.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Feature
...
Adds an option to publish trend records as periodic history or gas chromatograph history. This option is only available through the property grid view of the device setup (not on the form view).
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where AGA factor values were being interpreted incorrectly (inverse value) when producing the Yes/No factor string for the Factors field in outputs like CFX. *Effect on Published Output: This may result in modified output for Totalflow AGA factor values.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where an incorrect data type was reported for unlisted integer tags polled as bit values.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where Calculate Average Flowrate field was missing in PFX output.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where certain fields in PGAS xml such as Flowing Density and Uncorrected Density were not converted correctly if in any format other than double precision.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where Connection object's 'Quiet Delay' and 'Transmit Delay' were mislabeled.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where error code ORA-03149 was not detected properly.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where history collection could loop if the device returned an error/status ‘33’.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where the driver may not correctly calculate the sequence number for the last available record, resulting in re-collection and a duplicate record.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where the maximum allowed value for the 'Slow Timeout" property for GC Writes was changed from a previous version and became too limiting.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue with time sync when RBAC security (operator ID and Password) is used.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects issues where re-sizing windows caused control layout problems.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects various issues that could result in history collection stopping if a time gap was detected or if multiple duplicate records were detected.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
For ROC800L added missing data for EFM fields ending in "IndexEnd". *Effect on Published Output: This change will add a column for the new Index End value to published outputs that use the Database or CSV publishers and will fill in the Index End field in CFX files.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Improves history collection logic to allow better handling of invalid records.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Improves Log Viewer and Queue Viewer so they save configured column widths.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Improves performance on Archive Management views and queries.
...
7.1.306
...
Protocols: Totalflow Protocol
...
Issue
...
Improves Totalflow protocol to prevent publishing repeated alarm records when the alarm state hasn't changed. *Effect on Published Output: This may result in modified output for Totalflow. This change prevents publishing repeated Totalflow alarm records when the alarm state hasn't changed. Also fixes the alarm bits value published as part of the log record.
...
7.1.306
...
Publishing
...
Feature
...
Adds an option to control the insertion of a quality element from meter configuration data.
...
7.1.306
...
Publishing
...
Feature
...
Adds an option to convert trailing timestamps to leading for AutoSol EFM Database and XML publishers.
...
7.1.306
...
Publishing
...
Feature
...
Adds an option to convert trailing timestamps to leading.
...
7.1.306
...
Publishing
...
Feature
...
Adds an option to create analysis records from volume records in PGAS xml publisher.
...
7.1.306
...
Publishing
...
Feature
...
Adds an option to create gas quality records from gas component data in meter configuration records.
...
7.1.306
...
Publishing
...
Issue
...
Improves PGAS processing speed by restructuring the XML content. *Effect on Published Output: This change will result in a difference in the structure of PGAS XML file.
...
7.1.306
...
Publishing
...
Issue
...
Modified the PGAS xml publisher to refrain from converting numbers into scientific notation. *Effect on Published Output: This change will result in a difference in the structure of PGAS XML file.
...
7.1.306
...
Publishing
...
Issue
...
Moved GQ_PERIODIC records out to their own transaction. *Effect on Published Output: This change will result in a difference in the structure of PGAS XML file.
...
7.1.306
...
Publishing
...
Issue
...
Moved 'REAL_GRAVITY' in PGAS xml publisher from gas analysis node to the volume node.
...
7.1.306
...
Publishing
...
Issue
...
Removed enforced timeouts on database updates that could cause update failure.
...
7.1.306
...
Publishing
...
Issue
...
Writes to I/O items are now combined with other messages of different priority if a continuous scan is in progress. This is enabled for ‘generic’ or basic Protocols: Modbus Protocol only.
...
7.1.306
...
Reports
...
Feature
...
Adds two new reports for missing daily and missing hourly records.
...
7.1.306
...
Reports
...
Issue
...
Corrects a crash in the service when logging extra data items which had no extra data.
...
7.1.306
...
Reports
...
Issue
...
Corrects a history collection issue when using SCADAPack devices with Realflo revisions before 5.20.
...
7.1.306
...
Reports
...
Issue
...
Corrects an issue that caused history collection looping if an archive object was configured to be its own GC archive.
...
7.1.306
...
Reports
...
Issue
...
Corrects an issue that could leave an ‘empty’ request message queued while in continuous scan mode if all OPC items were removed.
...
7.1.302
...
ACM Server
...
Feature
...
Adds an OPC tag to indicate when running in Safe Mode.
...
7.1.302
...
ACM Server
...
Feature
...
Adds OPC Server item ServerStartTime(local and UTC).
...
7.1.302
...
ACM Server
...
Feature
...
Adds OPC tags for ServerName and DiskActivity.
...
7.1.302
...
ACM Server
...
Feature
...
Adds support for /B (Boolean) modifier on Status item.
...
7.1.302
...
ACM Server
...
Feature
...
Adds support for the new Microsoft OLE DB database connectivity.
...
7.1.302
...
ACM Server
...
Feature
...
Adds the ability to browser for Alias tags in an OPC client.
...
7.1.302
...
ACM Server
...
Feature
...
Adds the ability to display last poll times by interval.
...
7.1.302
...
ACM Server
...
Feature
...
Adds the ability to display last poll times in Julian date format.
...
7.1.302
...
ACM Server
...
Feature
...
Adds the ability to keep and historize previous meter configurations.
...
7.1.302
...
ACM Server
...
Issue
...
Corrects a memory leak issue.
...
7.1.302
...
ACM Server
...
Issue
...
Corrects an issue where asiCONFIGSERVER service could crash.
...
7.1.302
...
ACM Server
...
Issue
...
Corrects an issue where OPC item $Server.ActiveItemCount was not decrementing when appropriate.
...
7.1.302
...
ACM Server
...
Issue
...
Corrects an issue where renaming an object while modifying an additional property in the object would fail to modify the additional property.
...
7.1.302
...
ACM Server
...
Issue
...
Corrects an issue where server level aliasing was not working.
...
7.1.302
...
ACM Server
...
Issue
...
Corrects an issue where the Change Log was not being updated on object creation.
...
7.1.302
...
ACM Server
...
Issue
...
Corrects an issue where the item modifier for interval <i*> was not supported for alias items.
...
7.1.302
...
ACM Server
...
Issue
...
Corrects an issue where the OPC tag MaxDatabaseSize was not always accurate depending upon how the database was set up.
...
7.1.302
...
ACM Server
...
Issue
...
Corrects an issue with folder security override.
...
7.1.302
...
ACM Server
...
Issue
...
Corrects an issue with the alias group activate tags option where it had to be disabled then re-enabled to operate properly.
...
7.1.302
...
ACM Server
...
Issue
...
Imposed a limit on the number of API custom interface item groups to avoid memory saturation.
...
7.1.302
...
ACM Server
...
Issue
...
Improves the ability to re-connect to the database in the event of a disconnect.
...
7.1.302
...
Client Application
...
Feature
...
Adds a feature where users may republish a device.
...
7.1.302
...
Client Application
...
Feature
...
Adds a maximum record count for report viewer.
...
7.1.302
...
Client Application
...
Feature
...
Adds a user preference for when to activate alias tags on the new dashboard status tab.
...
7.1.302
...
Client Application
...
Feature
...
Adds Archive Reporting and Management feature.
...
7.1.302
...
Client Application
...
Feature
...
Adds client DLL information to the 'View Client/Server info' display.
...
7.1.302
...
Client Application
...
Feature
...
Adds dashboard for Health & Status.
...
7.1.302
...
Client Application
...
Feature
...
Adds support for multi-select on search results.
...
7.1.302
...
Client Application
...
Feature
...
Adds support in the Station Wizard for the Daniels Gas Chromatograph.
...
7.1.302
...
Client Application
...
Feature
...
Adds support to the Station Wizard for creating and linking connections and schedules.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue in the multi-object editor where CategoryName was missing.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue when making a change to database properties and not saving before changing tabs.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where a value in the record collection dialog was not displayed correctly.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where changing a property in a time synchronization object changed its icon.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where folder multi-select followed by single-select behaved oddly.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where object names could contain trailing spaces.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where opening a device from a search was not working.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where ROC History Map user fields were lost upon export/import.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where the logger did not return to 'Play' after being paused on a scroll event.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where the logger was able to be paused even when empty.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where the multi-object editor could error on numeric values.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where the Multi-object editor was not saving applied filters.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where the object count was missing when accessed from Category view.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue where the user interface was not correctly saving modified enumerations.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue with the importer where line breaks could cause unexpected results.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue with the importer where linked objects were getting lost.
...
7.1.302
...
Client Application
...
Issue
...
Corrects an issue with the multi-object editor and Hex Repeater Action Groups.
...
7.1.302
...
Client Application
...
Issue
...
Improves the multi-object editor to allow for editing of common properties regardless of type.
...
7.1.302
...
Client Application
...
Issue
...
Improves the performance of the log viewer so it does not lag behind.
...
7.1.302
...
Client Application
...
Issue
...
Improves the speed with which object tabs are closed.
...
7.1.302
...
Client Application
...
Issue
...
Updated object icons.
...
7.1.302
...
Connections: Base Connection
...
Feature
...
Adds logic to prevent task starvation that causes a high volume of high priority tasks to prevent lower priority tasks from running.
...
7.1.302
...
Connections: Base Connection
...
Issue
...
Corrects an issue where the Queue Viewer can see 'orphaned' polls when switching between primary and secondary connections.
...
7.1.302
...
Connections: TCPIP Connection
...
Feature
...
Adds new OPC Item 'CurrentHost' to indicate which Host Address is current.
...
7.1.302
...
Connections: TCPIP Connection
...
Issue
...
Corrects an issue where queue viewer messages were not being removed upon completion when switching between primary and alternate connections.
...
7.1.302
...
Connections: TCPIP Connection
...
Issue
...
Corrects an issue where the lost connection timeout was not always accurate.
...
7.1.302
...
Connections: TCPListen Connection
...
Issue
...
Corrects an issue where only some of the devices start to poll when at least 'max sessions' of them are due at once.
...
7.1.302
...
Connections: TCPPool Connection
...
Issue
...
Corrects an issue where demand stayed on after polling failed due to a lack of response.
...
7.1.302
...
Connections: TCPPool Connection
...
Issue
...
Corrects an issue where lost connection timeout was not properly reset on valid response.
...
7.1.302
...
Connections: TCPPool Connection
...
Issue
...
Corrects an issue where modem health was incorrect when the 'Release when done' option was used.
...
7.1.302
...
Connections: TCPPool Connection
...
Issue
...
Improves TCP Pool so that it can try another modem port within the same poll cycle if the previous modem failed initialization.
...
7.1.302
...
Protocols: Base Protocol
...
Feature
...
Adds continuous scan.
...
7.1.302
...
Protocols: Base Protocol
...
Feature
...
Adds the ability to turn on continuous scan for a set number of seconds.
...
7.1.302
...
Protocols: Base Protocol
...
Issue
...
Removed obsolete property ‘SwitchDelay’. This may cause error messages during startup. These error messages can be safely ignored. These properties can be removed from the database by running the ‘DbCleanup.sql’ script generated during ACM startup. This file can be found in the ACM data directory.
...
7.1.302
...
Protocols: BP Wellcontrol Modbus Protocol
...
Feature
...
Adds new support for device BP WELLCONTROL.
...
7.1.302
...
Protocols: BSAP Protocol
...
Feature
...
Adds support for ControlWave devices to use list numbers greater than 255.
...
7.1.302
...
Protocols: BSAP Protocol
...
Issue
...
Corrects an issue where polling failed to resume after the device was interrupted by another device on the same connection.
...
7.1.302
...
Protocols: ControlLogix Protocol
...
Feature
...
Adds support for the connection tag modifiers <C1> and <C2>.
...
7.1.302
...
Protocols: ControlLogix Protocol
...
Issue
...
Corrects an issue where internal tags were causing the connection to attempt connection even when disabled.
...
7.1.302
...
Protocols: ControlLogix Protocol
...
Issue
...
Corrects an issue where the tag discovery process was receiving an incomplete message and crashing.
...
7.1.302
...
Protocols: ControlLogix Protocol
...
Issue
...
Corrects an issue with multidimensional writes (tag[0,1]).
...
7.1.302
...
Protocols: ControlLogix Protocol
...
Issue
...
Corrects an issue with the LEN string write option.
...
7.1.302
...
Protocols: ControlLogix Protocol
...
Issue
...
Important: The option to enable non-listed tags is now defaulted to ‘enabled’. If you have an existing configuration and use the ‘Enable Non-Listed Tag Validation’ option, OPC items not found in the driver’s saved tag file must now have a data type specifier appended to their names (example: MyBool;C1).
...
7.1.302
...
Protocols: ControlLogix Protocol
...
Issue
...
Improves CONTROLLOGIX driver to better handle errors from the RegisterSession command using an EIP encapsulated header.
...
7.1.302
...
Protocols: DF1 / ABTCP Protocol
...
Feature
...
Adds support for the Test Communications feature.
...
7.1.302
...
Protocols: DF1 / ABTCP Protocol
...
Issue
...
Corrects an issue where gas chromatograph writes were malformed.
...
7.1.302
...
Protocols: DF1 / ABTCP Protocol
...
Issue
...
Corrects an issue where polling errors were not being logged.
...
7.1.302
...
Protocols: DF1 / ABTCP Protocol
...
Issue
...
Corrects an issue with PLC5 Serial response.
...
7.1.302
...
Protocols: DF1 / ABTCP Protocol
...
Issue
...
Corrects invalid values for flowing time and low flow cutoff alarms.
...
7.1.302
...
Protocols: DNP3 Protocol
...
Feature
...
Adds support for Emerson FBx flow computers using the DNP3 protocol.
...
7.1.302
...
Protocols: DNP3 Protocol
...
Issue
...
Corrects an issue where message response bytes were logged repeatedly in the logs.
...
7.1.302
...
Protocols: DNP3 Protocol
...
Issue
...
Improves the handling of large message fragments.
...
7.1.302
...
Protocols: Eagle Protocol
...
Issue
...
Corrects an issue with Reset Audit Trail feature.
...
7.1.302
...
Protocols: Flow Automation Protocol
...
Issue
...
Corrects an issue where alarm and event archives were repeating uploads.
...
7.1.302
...
Protocols: Flow Automation Protocol
...
Issue
...
Corrects an issue where Gas Chromatograph write functions were being requested of a device that does not support such writes.
...
7.1.302
...
Protocols: Flow Automation Protocol
...
Issue
...
Corrects an issue with function code 34.
...
7.1.302
...
Protocols: Hex Repeater Protocol
...
Issue
...
Corrects an issue where a demand poll would be repeated without being requested.
...
7.1.302
...
Protocols: Hex Repeater Protocol
...
Issue
...
Improves time synchronization user interface and logging.
...
7.1.302
...
Protocols: Kimray Modbus Protocol
...
Issue
...
Improves logging to better inform the user when an archive is misconfigured.
...
7.1.302
...
Protocols: Kinder Morgan Modbus Protocol
...
Issue
...
Corrects an issue where ACM got out of sync with device history after a device restart.
...
7.1.302
...
Protocols: Mercury Protocol
...
Feature
...
Adds a new /string modifier to better control data type.
...
7.1.302
...
Protocols: Mercury Protocol
...
Feature
...
Adds default login information.
...
7.1.302
...
Protocols: Mercury Protocol
...
Feature
...
Adds Mercury version number to the PGAS publisher.
...
7.1.302
...
Protocols: Mercury Protocol
...
Feature
...
Adds new option for mapping of EFM volume.
...
7.1.302
...
Protocols: Mercury Protocol
...
Feature
...
Adds the ability to schedule meter configuration polls.
...
7.1.302
...
Protocols: Mercury Protocol
...
Issue
...
Corrects an issue where a duplicate history record could stop the poll.
...
7.1.302
...
Protocols: Mercury Protocol
...
Issue
...
Corrects an issue where OPC item "Status" would display a status of complete when communications are good but the Site id is incorrect.
...
7.1.302
...
Protocols: Mercury Protocol
...
Issue
...
Corrects an issue where using the RR command for Audit Trail collection could result in error.
...
7.1.302
...
Protocols: Mercury Protocol
...
Issue
...
Corrects an issue where volume conversion 'publish in MCF' option was using CF.
...
7.1.302
...
Protocols: Mercury Protocol
...
Issue
...
Corrects an issue where volume data would report incorrectly with option to convert to MCF.
...
7.1.302
...
Protocols: Mercury Protocol
...
Issue
...
Improves ability to return multiple records within a single response.
...
7.1.302
...
Protocols: Mercury Protocol
...
Issue
...
Improves the message retry feature to occur if the sign on and wake up failed due to error code.
...
7.1.302
...
Protocols: Mercury Protocol
...
Issue
...
Improves the validation of EFM records to not include records with dates in the future.
...
7.1.302
...
Protocols: Mercury Protocol
...
Issue
...
Maximized the performance of polls with multi-record history reads.
...
7.1.302
...
Protocols: Modbus Protocol
...
Feature
...
Adds MODBUS Broadcast Mode.
...
7.1.302
...
Protocols: Modbus Protocol
...
Feature
...
Adds support for low priority writes <lpw> and delayed writes <dw>.
...
7.1.302
...
Protocols: Modbus Protocol
...
Issue
...
Corrects an issue where a "Test Communication" command reported a misleading error message when the device is misconfigured.
...
7.1.302
...
Protocols: Modbus Protocol
...
Issue
...
Corrects an issue where a checksum error was causing a crash.
...
7.1.302
...
Protocols: Modbus Protocol
...
Issue
...
Corrects an issue where a time synchronization error was logged when there was no error.
...
7.1.302
...
Protocols: Modbus Protocol
...
Issue
...
Corrects an issue where auto recovery would attempt to switch communications back to the primary schedule before the current poll is complete.
...
7.1.302
...
Protocols: Modbus Protocol
...
Issue
...
Corrects an issue where the demand flag is stuck 'on'.
...
7.1.302
...
Protocols: Modbus Protocol
...
Issue
...
Corrects an issue where the register count and byte count included in Modbus multi-register write messages was not consistent with the number of bytes and registers actually written.
...
7.1.302
...
Protocols: Modbus Protocol
...
Issue
...
Corrects an issue with the MODBUS bit display modifier (L/0.32).
...
7.1.302
...
Protocols: Modbus Protocol
...
Issue
...
Important: Devices with an address value of zero are treated as write-only broadcast devices.
...
7.1.302
...
Protocols: Modbus Protocol
...
Issue
...
Improves efficiency of write requests when data is of disparate types.
...
7.1.302
...
Protocols: Modbus Protocol
...
Issue
...
Improves MODBUS driver to avoid a crash that could occur upon receipt of invalid data.
...
7.1.302
...
Protocols: Modbus Protocol
...
Issue
...
Improves the polling process when a CRC error is returned from a device.
...
7.1.302
...
Protocols: Omni Modbus Protocol
...
Issue
...
Corrects an issue where prove records were not processed correctly if there were multiple prove records on multiple meters.
...
7.1.302
...
Protocols: Prosoft Modbus Protocol
...
Feature
...
Adds error messaging to alert the user when the configured message size is not sufficient to hold the expected response.
...
7.1.302
...
Protocols: Reynolds Protocol
...
Feature
...
Adds the ability to map uncorrected volume to PGAS EFM field 'index off'
...
7.1.302
...
Protocols: ROC Protocol
...
Issue
...
Add Gas Chromatograph fields to the 800L liquid meter configuration map.
...
7.1.302
...
Protocols: ROC Protocol
...
Feature
...
Adds a button to display the default mapping on the ROC dialog.
...
7.1.302
...
Protocols: ROC Protocol
...
Feature
...
Adds DS800 OPC tags.
...
7.1.302
...
Protocols: ROC Protocol
...
Feature
...
Adds support for FB1000/FB2000 series Flow Computers.
...
7.1.302
...
Protocols: ROC Protocol
...
Feature
...
Adds the ability to collect extended history from a ROC even if it has no standard history configured.
...
7.1.302
...
Protocols: ROC Protocol
...
Issue
...
Corrects an issue where bad TLPs in OPC (due to data type) caused good tags following them to also be bad.
...
7.1.302
...
Protocols: ROC Protocol
...
Issue
...
Corrects an issue where Extended history was not polling points 23, 24 and 25.
...
7.1.302
...
Protocols: ROC Protocol
...
Issue
...
Corrects an issue where OPC tag LastTimeSyncResult was inconsistent.
...
7.1.302
...
Protocols: ROC Protocol
...
Issue
...
Corrects an issue where the OPC browse section "MISCELLANEOUS" was missing.
...
7.1.302
...
Protocols: ROC Protocol
...
Issue
...
Improves support for polling of the ROC800 Liquid LiquidCalcs program.
...
7.1.302
...
Protocols: ROC Protocol
...
Issue
...
Improves the Coriolis Meter Override feature to include override of Calculation Method.
...
7.1.302
...
Protocols: SCADAPack Protocol
...
Feature
...
Adds advanced meter configuration capability to SCADAPACK.
...
7.1.302
...
Protocols: SCADAPack Protocol
...
Feature
...
Adds support for the retrieval of liquid history.
...
7.1.302
...
Protocols: SCADAPack Protocol
...
Issue
...
Corrects an issue where ASI Data Service would crash with SCADAPACK Test Communication command.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Feature
...
Adds a scheduling interval option for meter configuration read.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Feature
...
Adds mapping for EFM fields 'OPEN IV' and 'CLOSE IV'.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Feature
...
Adds new 'Low Bandwidth' feature.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Feature
...
Adds support for limiting old data for Totalflow trends.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Adding support for Debounce input reads
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Adding support for processing unsolicited messages.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where deleting an internal duplicate EFM configuration field more than once could result in a crash.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where EFM field 'CTPL' was not being published correctly.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where for some event types, the old and new values would mistakenly be the same.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where 'Observed Density' was published incorrectly.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where requesting max records for one upload type but not all resulted in error.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where scheduling switched from alternate back to primary prematurely.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where the archive limits object was not applied properly.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Corrects an issue where the OPC tag 'DateTime' was not being resolved correctly.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Important: The default behavior for history retrieval is now to use Low Bandwidth mode when in a communication retry. This can be changed through the device configuration (This note added February 11, 2019).
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Improves error messaging when archive is not configured.
...
7.1.302
...
Protocols: Totalflow Protocol
...
Issue
...
Improves validation of time synchronization objects to avoid crash.
...
7.1.302
...
Publishing
...
Feature
...
Adds a new option where users may configure the database publisher to ignore ORACLE constraints
...
7.1.302
...
Publishing
...
Feature
...
Adds AGA3-2013 and other constants to validation functions for CFX and OLFP.
...
7.1.302
...
Publishing
...
Feature
...
Adds custom field mapping to the PGAS XML publisher.
...
7.1.302
...
Publishing
...
Feature
...
Adds handling for RecordStartDate, RecordStartTime, RecordEndDate, & RecordEndTime for protocols with batch records that send those fields in separately.
...
7.1.302
...
Publishing
...
Feature
...
Adds new PGAS/XML properties.
...
7.1.302
...
Publishing
...
Feature
...
Adds precision options to the FLOWCAL publishers.
...
7.1.302
...
Publishing
...
Feature
...
Adds 'sediment and water percent' value to the PGAS XML quality record.
...
7.1.302
...
Publishing
...
Feature
...
Adds SP_LOW_SPAN and SP_HIGH_SPAN to PGAS XML meter configuration.
...
7.1.302
...
Publishing
...
Feature
...
Adds support for redundant output to the PGAS XML publisher.
...
7.1.302
...
Publishing
...
Feature
...
Adds support for the republication of specific devices or meters.
...
7.1.302
...
Publishing
...
Feature
...
Adds the AGA3-2013 calculation method.
...
7.1.302
...
Publishing
...
Feature
...
Adds user configurable XML element options to the PGAS XML publisher.
...
7.1.302
...
Publishing
...
Issue
...
Allow AGA7 as a valid calculation method for Coriolis meters.
...
7.1.302
...
Publishing
...
Issue
...
Corrects a logging message regarding the number of records processed.
...
7.1.302
...
Publishing
...
Issue
...
Corrects an issue where empty token values could prefix filenames with '0'.
...
7.1.302
...
Publishing
...
Issue
...
Corrects an issue where FLOWCAL publishers failed to translate 'Totalizer Digits'.
...
7.1.302
...
Publishing
...
Issue
...
Corrects an issue where 'Millibar Differential Pressure' was missing from CFX output files.
...
7.1.302
...
Publishing
...
Issue
...
Corrects an issue where the collection time on a meter configuration record was actually a history collection time.
...
7.1.302
...
Publishing
...
Issue
...
Corrects an issue where the PGAS XML publisher was using the wrong value for "QTY_CALC_PERIOD".
...
7.1.302
...
Publishing
...
Issue
...
Corrects an issue where the publisher filter was not appropriately applying to meter only records.
...
7.1.302
...
Publishing
...
Issue
...
Corrects an issue where the publisher would crash due to the 'Leading Timestamp' option.
...
7.1.302
...
Publishing
...
Issue
...
Corrects an issue with CorrectedMass not appearing in volume records.
...
7.1.302
...
Publishing
...
Issue
...
Improve the logic when looking for future dates where the future extends beyond 2038.
...
7.1.302
...
Publishing
...
Issue
...
Improves PGAS/XML GC output.
...
7.1.302
...
Publishing
...
Issue
...
Improves the PGAS XML publisher to better handle time changes.
...
7.1.302
...
Publishing
...
Issue
...
Increased potential length of the custom header string in CSV publisher.
...
7.1.302
...
Publishing
...
Issue
...
Update PGAS characteristics fields to latest v16 specification.
...
7.1.302
...
Publishing
...
Issue
...
Updated FLOWCAL publishers to synchronize with the latest updates.
...
7.1.302
...
Publishing
...
Issue
...
Updated the PGAS XML publisher so that gas analysis data may be processed with the new GQ Periodic node.
...
7.1.302
...
Reports
...
Feature
...
Adds a report for meters published by publisher filter.
...
7.1.302
...
Reports
...
Feature
...
Adds a report to show an audit trail of commands sent.
...
7.1.302
...
Reports
...
Feature
...
Adds scheduled reports.
...
7.1.302
...
Reports
...
Issue
...
Corrects an issue where the Archive Table Report was omitting records if a meter was specified.
...
7.1.302
...
Protocols: Omni Protocol
...
Feature
...
Adds positive displacement meter type for Omni firmware 22 and 26.
...
7.1.302
...
Reports
...
Issue
...
Corrects an issue where a report's timestamp could be incorrect if the report was collected by command.
...
7.1.302
...
Protocols: Base Protocol
...
Issue
...
Corrects an issue where history collection is impacted when the GC archive has a different buffer size than periodic archive.
...
7.1.302
...
Publishing
...
Issue
...
. |