Instructions for creating key pairs and certificates for use with AUTOSOL Edge products. Prerequisite:
OpenSSL is installed and in your system PATH.
For Debian Linux, you may check to see if openssl is installed and on your PATH using the which command:
$ openssl which
Where the expected output is the file path where openssl is installed. Example:
$ which openssl/usr/bin/openssl
If openssl is not installed, you will see nothing. The most straightforward way to install openssl in Debian is by using the package manager:
sudo apt-get update && sudo apt-get install openssl
Once openssl is installed you can create your certificate chain.
How you create your certificate chain depends on your desired security posture. There are two options:
TLS with Server Certificate Authentication
TLS with Server and Client Certificate Authentication
Steps for Creating Certificates for Server Authentication
For this step, the server (the broker) authenticates to the client with a certificate before the TLS connection is established. The client does not authenticate to the broker with a certificate, but may do so through other means (password, etc.).
The outputs for this process are:
ca.key file - to be kept private to (this) system that generated it.
ca.pem file - public certificate authority (self signed) certificate, to be distributed.
server.key file - to be kept private to where the MQTT broker (the TLS server) resides.
server.pem file - public server certificate, to be distributed to the MQTT broker.
One or more server certificates can be created, one for each MQTT broker. The server certificate contains the IP or hostname of that server. During TLS session establishment, the TLS client (eACM-MQTT, Bridge, Edge Manager, etc.) will compare the IP or hostname that it is connecting to with the CN (Common Name) presented by the server certificate. If there is a match, the TLS client will attempt to connect to the server. If not, the TLS client will drop the connection and regard it as unverified and untrusted. You may choose to break this rule by unchecking the “Verify Certificate” box (not recommended).
| Info |
|---|
Leaving the “Verify Certificate” box unchecked may expose your TLS client to Man-in-the-Middle attacks. You have an encrypted connection, but have not proven to whom you are connected. |
The inputs for this process are:
Hostname or IP of your MQTT broker’s server, to be used in the CN of the server certificate
Password for ca.key (optional)
Password for server.key (optional)
The exact steps in this process can be varied according to your needs. What follows is an example.
Create the key pair (ca.key) used by your certificate authority. To protect it with a password (you will be prompted):
| Code Block |
|---|
openssl genrsa -aes256 -out ca.key |
To create ca.key without a password:
| Code Block |
|---|
openssl genrsa -out ca.key 2048 |
Create the self signed certificate authority certificate (ca.pem). If you used a password when creating ca.key, you will be prompted for it.
| Code Block |
|---|
openssl req -new -x509 -days 3650 -extensions v3_ca -key ca.key -out ca.pem -subj "/C=US/ST=Texas/O=THIS_COMPANY INC/CN=John Smith/emailAddress=johnsmith@gmail.com" --outform PEM |
Create the key pair (server.key) used by your broker.
It is important to note that this step can (and probably should) take place where broker is installed and kept private there.
To protect it with a password (you will be prompted):
| Code Block |
|---|
openssl genrsa -aes256 -out server.key |
To create server.key without a password:
| Code Block |
|---|
openssl genrsa -out server.key 2048 |
Create the certificate signing request for the server (the broker), server.csr. If you created ca.key on a different machine, you will need to copy server.csr to that machine.
If you protected server.key with a password, you will be prompted.
In this example, you will need to substitute 10.3.0.11 with the IP or hostname of your broker’s server for TLS verification to work correctly.
| Code Block |
|---|
openssl req -out server.csr -key server.key -new -subj "/C=US/ST=Texas/O=THIS_COMPANY INC/CN=10.3.0.11/emailAddress=johnsmith@gmail.com" --outform PEM |
| Info |
|---|
The server certificate’s CN field should match the hostname or IP of the MQTT broker. |
Create the server certificate (server.pem). The step must take place where you have your ca.key. The server.csr and ca.pem files are also required. If you used a password when creating your ca.key, you will be prompted for it.
| Code Block |
|---|
openssl x509 -req -in server.csr -CA ca.pem -CAkey ca.key -CAcreateserial -out server.pem -days 3650 --outform PEM |
You now have all the files required to configure your client and server (broker) for TLS authentication.
...
You will need to provide ca.pem to both your client and server.
...
| Note |
|---|
AUTOSOL does not provide this information for use as a source of security advice or best practices. The use of these examples is done at your own discretion and risk and with agreement that you will be solely responsible for any damage to your computer system or loss of data that results from such activities. |
Steps for Creating Certificates for Client Authentication
For this step, the client (the eACM MQTT app, Bridge, Edge Manager, etc.) authenticates to the server with a certificate before the TLS connection is fully established. This takes place after the server has authenticated to to the client with its own (server) certificate.
| Info |
|---|
All of the steps |
...
under “Steps for Creating Certificates for Server Authentication” must be completed first before proceeding. |
Create one key pair and one certificate for each uniquely identifiable client desired.
Whether you create one client certificate to share among your MQTT clients -or- each MQTT client has its own certificate is dictated by your organization’s IT security posture.
| Info |
|---|
Repeat this process for each key pair and client certificate that your logistics and security posture dictate. |
The outputs for this process are:
...
| Code Block |
|---|
openssl genrsa -aes256 -out client.key 2048 |
Create the certificate signing request for the client (the MQTT client), client.csr. If you created ca.key on a different machine, you will need to copy client.csr to that machine.
...
If your broker is configured to authenticate based on the CN section of the Subject field, substitute MyMqttWidget MyEACM for something else that meaningfully identifies that particular MQTT client or its permissions role on the broker.
| Code Block |
|---|
openssl req -out client.csr -key client.key -new -subj "/C=US/ST=Texas/O=THIS_COMPANY INC/CN=MyMqttWidgetMyEACM/emailAddress=johnsmith@gmailname@company.com" --outform PEM |
Create the client certificate (client.pem). The step must take place where you have your ca.key. The client.csr and ca.pem files are also required. If you used a password when creating your ca.key, you will be prompted for it.
| Code Block |
|---|
openssl x509 -req -in client.csr -CA ca.pem -CAkey ca.key -CAcreateserial -out client.pem -days 3650 --outform PEM |
You now have all the files required to configure your client and server (broker) for TLS authentication with both server authentication and client authentication.
...
You will need to provide ca.pem to both your client and server.
...
You will need to provide server.key and server.pem to your server.
...