Versions Compared

Old Version 2

changes.mady.by.user kristina schaeffer (Unlicensed)

Saved on

compared with

New Version 3

changes.mady.by.user Michael Standal

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Expand
titleTable Of Contents

Table of Contents
printablefalse

...

  1. Exclude Non-External: Use the External GC Reference or External Meter Reference properties to find the correct meter name and device. The default setting is False. To change this setting, select the cell marked “False” and use the drop-down menu.
  2. Fail Orphaned Requests: Any gas analysis writes that occur during a server shutdown will be marked as “failed”. The default setting is False. To change this setting, select the cell marked “False” and use the drop-down menu.
  3. FlowCal Area Index: The FlowCalScadaRequest measurement area index to use for requests. Leave empty to specify all areas. The default setting is empty.
  4. Max Concurrent Writes: The maximum number of gas analysis writes that can be queued simultaneously. The default setting is 25. To change this setting, select the cell with the numerical value and use keyboard input.
  5. Request Service Interval Timer: The interval time (in seconds) for the asiGCRequestManager service to process requests. Default is 30. Changes require a restart of the service.
  6. Trace Logging: This enables logging of gas analysis related progress messages. The default setting is False. To change this setting, select the cell marked “False” and use the drop-down menu.

...

  1. Archive Schedule: This enables users to configure when the Archive Manager process runs.
    1. Do not run automatically:  The archive process will only run if triggered to run manually. 
    2. Run every hour at # minutes past the hour:  If 55 is entered for minutes, the archive process will run at 1:55, 2:55, 3:55 and so on.
    3. Run once a day at entered time
  2. Detail Logging: This option allows users to show logging messages for starting and completing calls through the Report Service, such as, Archive Management and Scheduled Reports.

Server

The following settings associated with Server can be modified by users:

...

  • Archive Service Tcp Port: The port used to connect to the asiREPORTSERVER.exe service. This service houses both reporting and archive management features.
  • Command Service Tcp Port: The port used to connect to the asiCONFIGSERVER.exe service. This services houses both the configuration and command features.
  • Config Service Tcp Port: The port used to connect to the asiCONFIGSERVER.exe service.
  • Item Service Tcp Port: The port used to connect to the asiITEMSERVER.exe service.
  • Logging Service Tcp Port: The port used to connect to the asiLOGSERVER.exe service.
  • Report Service Tcp Port: The port used to connect to the asiREPORTSERVER.exe service.

...

TotalFlow Laptop File Import Service

These are settings associated with For these settings and information about the service, refer to the TotalFlow Laptop File Import Service that can be modified by users:

Configuration: Select the ellipses to open the configuration properties of this service.

...

page.