The Node item in the Tree View is used to group all configuration items in an application. It is also used to connect the Edge device to the Autosol App Manager. Right-click and select Properties to configure it.
| Table of Contents |
|---|
General
...
Name
This name for the Edge device.
...
| Note |
|---|
It is advised to keep this enabled unless troubleshooting. |
MQTT
...
Use this form to establish the Broker Connection used by the AUTOSOL App Manager. These settings are not used to publish data from Edge ACM, only to remotely configure the system.
Connection Retries
The number of attempts to reconnect to the current broker. To attempt to reconnect to the first broker on the list indefinitely, enter -1.
Connection Retry Interval (ms)
The amount of time to wait between retries of your broker connection. Entered in milliseconds.
Brokers
The list of brokers that have been added to the system. Use the + button to a broker to the list.
Enable Broker
Determines whether or not the node will attempt to communicate with the broker.
| Info |
|---|
If the Connection Retries are set to -1 the node will only ever attempt to communicate with the first enabled broker. |
Broker IP
The IP address of the MQTT broker
Broker Port
The port of the MQTT broker, default 1883
Keep Alive
The maximum time between messages to the MQTT broker. If the broker does not hear from the node within that time period, a node Death will be published.
Delete
Click the trash can icon to delete the broker entry.
Info
...
No settings are available on this tab. It provides additional information regarding the device you are currently connected to.