Page Comparison

...

• Corrected an issue that caused EFM history records to always be published with a value of 60 for the $$Record.Period$$ field.

  Note
  title Effect on Published Output
  EFM history records are now published with the correct value in the $$Record.Period$$ field.

  
  

• Corrected an issue that prevented the LogTrigger column from appearing on a CSV Audit Report.

  Note
  title Effect on Published Output
  The CSV audit report will contain the LogTrigger column by default. This may add an additional column to the CSV report.

  
  

• Modified the contents of the LogTrigger column in a CSV Audit Report to contain the entire T&A value.

  Note
  title Effect on Published Output
  The LogTrigger column in the CSV audit report will now contain the entire T&A field value.

  
  

• Corrected an issue that could cause non-time triggered audit records to be published even when the ACM device object was not configured to do so.

  Note
  title Effect on Published Output
  Non time-triggered audit records will only be published if the ACM device object is configured to do so.

  
  

• Corrected an issue that caused history upload to continue despite a failure to read audit configuration.

• Corrected an issue that prevented the K-Factor value from being published.

  Note
  title Effect on Published Output
  Non time-triggered audit records will only be published if the ACM device object is configured to do so.

  
  

Siemens S7 Protocol

• Resolved an issue with OPC item Read/Write access showing only Writable and not Readable.

Totalflow Protocol

• Modified the driver to stop history collection if it failed to retrieve meter configuration data unless it was successfully retrieved in a previous history collection.
• Modified the initial OPC quality of “MoveEvent” to be “Good” to match the other "Move" items.
• Corrected an issue that caused the "Request 3 days of history when 2 days history is needed" option to be ignored.