...
| Item | Data Type | FBNet Version | Description |
|---|---|---|---|
| ALARMACTIVE/1 | BOOL | V1, V2 | |
| ALARMLEVEL/1 | R4 | V1, V2 |
FCU Alarm Parameters
| Item | Data Type | FBNet Version | Description |
|---|
FCU Parameters
...
| AA1_HIGH | R4 | V1, V2 | |
| AA1_LOW | R4 | V1, V2 | |
| AA2_HIGH | R4 | V1, V2 | |
| AA2_LOW | R4 | V1, V2 | |
| AA3_HIGH | R4 | V1, V2 | |
| AA3_LOW | R4 | V1, V2 | |
| AA4_HIGH | R4 | V1, V2 | |
| AA4_LOW | R4 | V1, V2 | |
| AA5_HIGH | R4 | V1, V2 | |
| AA5_LOW | R4 | V1, V2 | |
| AA6_HIGH | R4 | V1, V2 | |
| AA6_LOW | R4 | V1, V2 | |
| AA7_HIGH | R4 | V1, V2 | |
| AA7_LOW | R4 | V1, V2 | |
| AA8_HIGH | R4 | V1, V2 | |
| AA8_LOW | R4 | V1, V2 | |
| ALARMENABLE/1 | UI2 | V1, V2 | |
| ANALOGALARMACTIVE/1 | UI2 | V1, V2 | |
| ANALOGALARMLEVEL/1 | R4 | V1, V2 | |
| ADDRESS | UI1 | V1, V2 | Address of attached Modbus slave |
| APREGISTER | UI2 | V1, V2 | FCU register # containing AP (LP). |
| BASEGROUP | UI2 | V1, V2 | Custom group number to configure used for AA TOTAL_FLOW only. |
| COMMSETUP | UI1 | V1, V2 | Bitmap for parity and # of stop bits Bit 0 - LSB, Bit 7 - MSB Parity (bits 0,1) 00 = no parity 01 = odd parity 10 = even parity Stop bit count (bit 2) 0 = 1 stop bit 1 = 2 stop bits Baud rate (bits 3,4) 00 = 1200 baud 01 = 2400 baud 10 = 4800 baud 11 = 9600 baud 7/8 bit ASCII mode (bit 5) 0 = 8 bit mode 1 = 7 bit mode |
| CURVOLREGISTER | UI2 | V1, V2 | FCU register # containing current Volume |
| DPREGISTER | UI2 | V1, V2 | FCU register # containing DP. |
| FCUPRESENT | UI1 | V1, V2 | |
| FROMTYPE | UI1 | V1, V2 | char, unsigned char, short, unsigned short, long, unsigned long, float, double. |
| ISASCII | UI1 | V1, V2 | Is the FCU talking ASCII or RTU protocol? |
| ISSLAVE | UI1 | V1, V2 | Is the FCU a slave or broadcast device? |
| LTREGISTER | UI2 | V1, V2 | FCU register # containing LT. |
| NOKDT | UI1 | V1, V2 | If true, the RTU turns on RTS, disabling KDT |
| PREFIX | UI1 | V1, V2 | Byte to send before the Modbus device address. |
| PREFIXCOUNT | UI1 | V1, V2 | Number of prefix bytes to send |
| PREVVOLENDCAPTIME | DATE | V1, V2 | |
| PREVVOLREGISTER | UI2 | V1, V2 | FCU register # containing previous Volume |
| PREVVOLSTARTCAPTIME | DATE | V1, V2 | |
| RATECONV | UI1 | V1, V2 | Conversion type for rate register. |
| RATEREGISTER | UI2 | V1, V2 | FCU register # containing inst. Rate. |
| SCANTIME | UI1 | V1, V2 | Number of seconds between scans. |
| SCANTIMEOUT | UI1 | V1, V2 | Number of 0.1 seconds to wait for a response from the FCU. |
| SUFFIX | UI1 | V1, V2 | Byte to send after the last CRC byte. |
| SUFFIXCOUNT | UI1 | V1, V2 | Number of suffix bytes to send. |
| SWAPTYPE | UI1 | V1, V2 | Type of swapping needed before conversion. |
| TYPE | UI2 | V1, V2 | Type of Modbus FCU device attached. |
| TIME1-35 | UI4 | V1, V2 | Time Stamp |
| VOL1-35 | R4 | V1, V2 | Volume |
FCU Parameters
| Item | Data Type | FBNet Version | Description |
|---|---|---|---|
| ADDRESS | UI1 | V1, V2 | Address of attached Modbus slave |
| APREGISTER | UI2 | V1, V2 | FCU register # containing AP (LP). |
| BASEGROUP | UI2 | V1, V2 | Custom group number to configure used for AA TOTAL_FLOW only. |
| COMMSETUP | UI1 | V1, V2 | Bitmap for parity and # of stop bits Bit 0 - LSB, Bit 7 - MSB Parity (bits 0,1) 00 = no parity 01 = odd parity 10 = even parity Stop bit count (bit 2) 0 = 1 stop bit 1 = 2 stop bits Baud rate (bits 3,4) 00 = 1200 baud 01 = 2400 baud 10 = 4800 baud 11 = 9600 baud 7/8 bit ASCII mode (bit 5) 0 = 8 bit mode 1 = 7 bit mode |
| CURVOLREGISTER | UI2 | V1, V2 | FCU register # containing current Volume |
| DPREGISTER | UI2 | V1, V2 | FCU register # containing DP. |
| FCUPRESENT | UI1 | V1, V2 | |
| FROMTYPE | UI1 | V1, V2 | char, unsigned char, short, unsigned short, long, unsigned long, float, double. |
| ISASCII | UI1 | V1, V2 | Is the FCU talking ASCII or RTU protocol? |
| ISSLAVE | UI1 | V1, V2 | Is the FCU a slave or broadcast device? |
| LTREGISTER | UI2 | V1, V2 | FCU register # containing LT. |
| NOKDT | UI1 | V1, V2 | If true, the RTU turns on RTS, disabling KDT |
| PREFIX | UI1 | V1, V2 | Byte to send before the Modbus device address. |
| PREFIXCOUNT | UI1 | V1, V2 | Number of prefix bytes to send |
| PREVVOLENDCAPTIME | DATE | V1, V2 | |
| PREVVOLREGISTER | UI2 | V1, V2 | FCU register # containing previous Volume |
| PREVVOLSTARTCAPTIME | DATE | V1, V2 | |
| RATECONV | UI1 | V1, V2 | Conversion type for rate register. |
| RATEREGISTER | UI2 | V1, V2 | FCU register # containing inst. Rate. |
| SCANTIME | UI1 | V1, V2 | Number of seconds between scans. |
| SCANTIMEOUT | UI1 | V1, V2 | Number of 0.1 seconds to wait for a response from the FCU. |
| SUFFIX | UI1 | V1, V2 | Byte to send after the last CRC byte. |
| SUFFIXCOUNT | UI1 | V1, V2 | Number of suffix bytes to send. |
| SWAPTYPE | UI1 | V1, V2 | Type of swapping needed before conversion. |
| TYPE | UI2 | V1, V2 | Type of Modbus FCU device attached. |
FCU Previous Volume
| Item | Data Type | FBNet Version | Description |
|---|---|---|---|
| TIME1-35 | UI4 | V1, V2 | Time Stamp |
| VOL1-35 | R4 | V1, V2 | Volume |
Find Address
| Item | Data Type | FBNet Version | Description |
|---|---|---|---|
| ADDRESS | UI2 | V1, V2 | RTU Address |
...